Wheel sizes for different modifications of a Nissan car. Tires and wheels for Nissan Almera, wheel size for Nissan Almera What wheels fit on nissan almera n16

To drive safely, you need to choose the right tires and wheels. Unfortunately, many motorists do not take this issue very seriously. But the operation of the suspension, the dynamics of the car and the comfort during the trip depend on the size of the wheel.

Nissan Almera

The car is a prototype of the Japanese BluBord. It was produced from the factory with 195/65/15 tires. For all the years of manufacture, the chassis has not undergone any changes, so wheels with such parameters are suitable for the latest modifications of Almera.

185/65/15 tires fit perfectly on the Nissan Almera G15. For a budget option, it is better to put other models. The most common are 205/55/16. However, when installing, you must consider the size of the disks.

It must be marked 7.0 JJ PCD 4X100 DIA 60.1. In this case, the minimum overhang should be in the range ETT 38 - ET 43. If the size is set too large, the wheel arch may be touched by the tread. When the reach is increased, the wheel sits deeper in the wheel arch.

Nissan X-Trail

Over the years, the car was produced with different equipment. In addition to the engine, the appearance and interior of the cabin, the dimensions of the wheels also changed. The car, produced in 2001-2006, was equipped with 215/65 R16 tires. Tires sat on discs with a bolt pattern of 5x114.3, with a central hole diameter of 66.1. Departure was 40.

For second-generation cars manufactured in 2007-2010, the manufacturer recommends installing tires:

The plant began producing the third generation of Nissan X-Trail cars in 2011. All subsequent lines of the car are equipped with the same wheels. Manufacturers recommend installing tires and wheels of the following sizes:

Nissan Teana

The car belongs to the business class. From the factory, it comes with 16-18-inch alloy wheels. Main parameters:

• Razboltovka - 5x114.3,
• Width - 6.5-8.0J,
• Departure - ET 40-47,
• The central diameter is 66.1.

All these dimensions are selected depending on the configuration of the machine. Standard:

• 215/60/R16,
• 215/55/R17,
• 235/45/R18.

Some drivers install R18 tires. For them, the parameters 225/45 R18 are considered ideal. Most suitable discs:

• Razboltovka - 5x114.3,
• Width - 6.5-7.5J,
• Departure - ET 45-50,
• The diameter of the central hole is 66.1.

Other generations of teanas are equipped with similar tires with the same discs.

Nissan Almera Classic

The production of the car began in 2006. All subsequent models were equipped with the same wheels. The only difference could be only the volume of the internal combustion engine. Today the car is equipped with a 1.6 B10 Sedan engine.

2.01.2018

The safety of the vehicle while driving depends on the correct choice of rims, seasonality and the condition of the tires. Alas, but as practice shows, most even experienced motorists do not always take this seriously. What wheels to put on Nissan Almera? Since this question is considered the most frequently asked on the forums dedicated to this car model, we will try to answer it as informatively as possible.

The main parameters of any rim are its dimensions and the value of the maximum allowable load. All these values ​​are indicated in the vehicle's operating book, or directly on the rims installed by the manufacturer.

These should be the G15 Almers. Where is Logan?

The choice of disks for Almera of various modifications (N16, Classic, G15)

On the Internet, you can find enough information about the selection of wheels and tires for various modifications of Almer. However, many owners still cannot fully understand: how to choose the right wheels and tires for a car? First you need to plunge into the history of the creation of this vehicle. The prototype of the Nissan Almera G15 was the Japanese Bluebird, the basic equipment of which was produced with 195/65/15 rubber parameters. Since then, the running gear of this car has not changed much, and tires with such values ​​​​can be safely installed on modern Almera modifications. For example, on the G15 model, standard tires with parameters 185/65/15 work well, however, on budget options they have proven themselves worse. As part of the publication, we will not name the companies that produce tires. They are already known to everyone. Let's just say one thing: a good tire should work out on average 5-6 seasons, although this depends on the mileage of the road surface and driving style. This has been proven in practice. Amtel rubber, which is often installed from the factory on budget Nissans, does not always meet high requirements. This does not mean that it is bad, and the dimensions of the disks do not fit it.

One of the common sizes is 205/55/16. Tires with these parameters can also be installed. But, here it is necessary to take into account the dimension of the discs, which should have the following designation 7.0 JJ PCD 4X100 DIA 60.1, the minimum offset is ET 43, or it can be reduced to ET 38. With a larger dimension, the tread may touch the wheel arch. With a large overhang, the wheel sits deeper in the arch, and not vice versa.

Almera tuners love Nismo rims, they fit like stock and look cool

The main indexes in the designations of the wheels:

• PCD 4x100 - wheel bolt pattern designation (4 bolts located on a circle with a diameter of 100 mm);
• ET - disk offset;
• JJ is the disk width;
• H91 - maximum speed and permissible weight (index H \u003d 210 km / h, the number 91 indicates the mass, the maximum value of which is 615 kg);
• R - tire diameter (this parameter must necessarily be equal to the diameter of the disk);
• Tubeless - "tubeless";
• W (Winter) - tire for winter;
• DIA is the diameter of the hub hole. Note that on some forged wheels its value differs upwards. In this case, special centering inserts are provided that will help prevent wheel beating at high speeds.

The main dimensions of Nissan Almera wheels: R15 4×100 ET35-45 J6.5, R15 4×100 ET35-45 J6, R16 4×100 ET35-45 J7, R17 4×100 ET35-45 J7. These wheel sizes will fit tires with the following parameters: R14 175/70, R15 185/65, R15 195/60, R16 195/55.

Disk bolt pattern

The factory bolt pattern of G15 rims has the formula 4/100 or 4x100. There are cases when car owners specifically change this parameter (for example, with). However, such a measure is not always justified, given that in this case the original design parameters set by the manufacturer are changed.

Razboltovka Nissan Almera 4*100

It is important to choose a disc with suitable bolt patterns. This is necessary for proper wheel alignment. Note that it is allowed to install a disk, the diameter of the mounting circle of which differs from the value set by the manufacturer by several millimeters up or down. In this case, the car owner acts, as they say: at his own peril and risk. Incorrect bolt pattern causes a misalignment of the wheels, which can later lead to serious problems, up to spontaneous unscrewing of the bolts at speed. In addition, vibrations can be felt while driving. Moreover, the greater the discrepancy, the greater the discomfort from the movement felt by all those present in the vehicle.

Selection of winter tires for Nissan Almera

Many owners prefer not to focus on the seasonality of tires. Most likely, for reasons of economy, they simply buy all-season tires, sometimes not even of satisfactory quality. However, its use is largely justified only in regions with a mild climate and warm winters.

As for winter driving, it is recommended to purchase only high-quality Nissan Almera tires, which are made of durable and soft rubber. If you can somehow save money on summer tires, then you should not do this on tires for winter. Why is it necessary to purchase only high-quality branded winter tires? Only such products are distinguished by their composition: due to the presence of a large amount of synthetic rubber, the tire tread remains flexible at any, even extremely low temperatures, providing excellent grip on any winter road surface.

The fundamental factor when choosing winter tires is not the presence of the letter “W” on the side of the tire, and not the manufacturer (in conditions of fierce competition, everyone tries to keep the brand), but a clearly defined tread pattern, which can be of two types:

1. Scandinavian
2. European

They differ in the depth of the grooves and checkers on the tread plane. The Scandinavian type has deep grooves in the design and is more adapted to driving on snowy roads. European - on the contrary, it has a less pronounced pattern and is designed more for driving on icy highways. In addition, manufacturers produce tires with a universal tread pattern that performs well both on snowy and icy winter roads.

Differences between studless winter and summer tires

In regions with a large predominance of icy roads, it is recommended to install special winter studded tires with a universal tread pattern on the car. Such rubber is sold both in a finished version (with installed spikes), and with the possibility of their self-assembly. High-quality, soft, studded tires significantly increase vehicle handling on icy and snowy highways, making the ride comfortable and safe.

Forums are full of information on the selection of tires and wheels for a new car Nissan Almera 2013. It is the misunderstanding with the dimensions that is controversial. We decided to clarify this issue. So, Amtel tires of the standard size 185/65/15 are a budget option, inexpensive, but, frankly, not great. It was put on the conveyor only because of Largus in order to unify production.

Given the protrusions in the rear arch, you can forget about the 215, although there are options, including the R17.

Rubber size 195/65/15 can be safely installed, since this is one of the most common sizes. Initially, the Bluebird car - the Japanese prototype of the Nissan Almera 2013 - was supplied in the basic configuration once with this size; the wing arches are similar.

The most interesting option is 205/55/16. This size is also recommended. It is the most common in the world, but it should be borne in mind that then it will be possible to buy car wheels with a dimension of 7.0 JJ PCD 4X100 DIA 60.1 ET 43 and less - up to a minimum offset of ET 38. If the dimension is even smaller, there will be a danger of the wheel tread hitting arches in case of maximum compression of the suspension. The other extreme here is the installation of an offset ET 45 or a standard ET 50 with a 205th wheel width, since there is a risk of touching the protrusion in the rear right wheel arch.

Note that a longer reach provides a deeper fit of the wheel in the arch, but not vice versa, as many believe.

To maintain a smooth ride and in order to get rid of the "wretchedness" of empty wheel arches, we recommend that you opt for 205/60 R15.

Discussing Disc Choices -

Using the automatic selection of tires and wheels for the car Nissan Almera, you can avoid many problems related to their compatibility and compliance with the recommendations of car manufacturers. After all, they have a huge impact on a significant part of the operational properties of the vehicle, primarily on handling, fuel efficiency and dynamic qualities. In addition, one cannot fail to note the importance of tires and rims as elements of active safety. That is why the choice between them should be made as responsibly as possible, which implies the presence of a whole range of knowledge about these products.

Unfortunately, most car owners prefer not to go into such technical nuances. Regardless of this, the automatic selection system will be extremely useful, that is, it will minimize the likelihood of making the wrong decision when choosing certain tires and rims. And there is plenty to choose from, thanks to the widest range of such products presented in the Mosavtoshina online store.