Toyota Land Cruiser has remained at the top of the best SUVs for many years. The size of tires on the Land Cruiser 200, their specifics and features are of interest to car owners and those who plan to link their fate with an iron horse.
Factory wheel sizes
The size of the Toyota Land Cruiser 200 wheels depends on the specific configuration. The 4.5 TD and 4.7i even have 20-inch wheels; 4.5 D only ride on a 17 inch radius. When purchasing a new TLC from an authorized dealer, the buyer will be asked to choose the diameter of the rollers. Parameters of standard disks:
- R17: width 8.0, offset 60;
- R18: width 8.0, offset 60;
- R20: width 8.5, offset 60.
Alloy wheels are included with the car, and they are easily replaced with more expensive, but durable forged ones.
Stamping on the LK is nonsense: cheap "caps" are not combined with an expensive car.
Influence of non-standard disk sizes on technical characteristics
It should be noted right away: the installation of freelance disks is prohibited by law. They have not passed the appropriate checks and potentially pose a danger to road users. Of particular interest to the regulatory authorities are too small (which "Kruzak" does not threaten because of its dimension) or hyperbolized-large wheels. Some TLC owners boast that not only 22-inch wheels are installed on their iron horses, but even 35-inch ones.
The massive wheel is stable and spectacular - that's true. Improves car handling. But the chances of damaging a tire on a bad road increase, at least due to the fact that now the tire area is larger. The smoothness of movement is noticeably reduced, which is especially felt on bumps. Those who would like to ride "softer" can reduce the diameter of the wheel: instead of the factory 20-inch, put 17, if the manufacturer allows it.
When tuning, sometimes wider discs are installed that push the wheel out of the car arch. This makes the car heavier, which increases fuel consumption. The suspension and body will suffer from additional weight: the car is not designed to be loaded in places not intended for the carriage of goods. Also, widely spaced discs do not cover the suspension from possible damage.
Advantages and disadvantages of installing freelance drives:
It is better to refuse the use of "self-made" wheels on the Land Cruiser 200: a spectacular SUV is not worth the danger that wheels of unknown origin carry.
Alternative drive options
Acquiring an original disc in an official salon is an expensive pleasure. For a small savings, you can buy "skating rinks" from well-known brands. The best manufacturers are:
- LegeArtis (China);
- Kosei (Japan);
- Dotz (Germany);
- K&K (Russia);
- Alutec (Germany);
- OZ Racing (Italy);
- SKAD (Russia).
Those who do not want to pay for a big name choose replicas of top companies.
You can install any wheel on a car, the main thing is to take into account the bolt pattern.
Tires
The size of tires on the Toyota Land Cruiser 200 is determined by the diameter of the wheels. The manufacturer offers the following tire options:
The ongoing restyling did not affect the dimensions of the wheels, so the tire sizes of the Land Cruiser 200 did not change. This allows you to put tires from older generation machines on those that have just left the assembly line.
Peculiarities
The selection of tires for a car depends on the preferences of the owner of the car. Some people like hard ones, others like soft ones. Rubber manufacturers offer tires for wheels of any size Toyota Land Cruiser 200.
The favorite tires of the owners of the "cruiser" for both summer and winter are:
- Michelin;
- Yokohama;
- bridgestone;
- good year;
- Nokian.
The choice between winter spikes and Velcro (friction) depends on the needs of the car owner.
Tenacious spikes hold tightly to the ice on the track, so they are designed for those who drive away from cleared roads. On asphalt, they wear out quickly, so spikes are not the best option for the city. Some complain about the noise of such tires.
Grip with the road friction tires provide cavities in the rubber. The Scandinavian type of Velcro rides almost silently, but holds on to the road no worse than spikes. The Scandinavians are focused on snow and ice, but they also perform well on a clean track.
European-style friction tires are designed for warm winters with wet snow and slush, they are even closer to all-season tires, so they should be purchased for those regions where there are no frosts and snowfalls.
Tire customization
Those who do not risk experimenting with rims change the course of the car at the expense of tires, installing wider tires than standard ones:
Tire customization is fraught with trouble, so it is better to change the car within the limits established by the manufacturer.
Pressure
Toyota recommends inflating tires to 2.4 atmospheres. This is due to the massiveness of the car - it is not easy to withstand the considerable mass of the Land Cruiser. But drivers are complaining that the off-road vehicle rides too harshly to meet the set standard. For smooth running, comfort, it is recommended to reduce the pressure to 2.2 atmospheres.
At car services, they usually pump up to universal 2 atmospheres. For an inexperienced Kruzak owner, the difference is noticeable only in a soft ride. Flat tires wear out faster and reduce vehicle handling. The cost of carelessness may be too high.
Razboltovka
Toyota Land Cruiser 200 wheels are interchangeable, so the bolt pattern for discs of all diameters is the same:
- drilling (PCD) - 5 bolts with a diameter of 150 mm;
- central hole diameter (DIA) - 110.1 mm;
- nut 14x1.5.
Lexus LX, Toyota Land Cruiser Cygnus and Toyota Tundra have wheels with similar parameters.
If necessary, they will fit no worse than factory options.
How to remove the spare
The spare wheel of the Land Cruiser 200 is hidden in the bottom, and pulling it out is not as easy as it seems. Procedure for changing a wheel:
- Raise the bottom of the trunk.
- Insert the jack handle into the winch hole.
- To lower the wheel to the ground, turn the handle clockwise.
- Remove the spare from the bracket.
- Remove the mount by turning the winch counterclockwise.
The spare wheel storage system is really non-standard, so in order to avoid unpleasant surprises on the road, it is better to practice in advance.
Toyota Land Cruiser 200 is a popular Japanese SUV that is a success in the Russian market. Unlike domestic models of off-road vehicles, the Toyota Land Cruiser 200 is slightly inferior in cross-country ability, but provides a greater level of comfort in the cabin.
Nevertheless, despite the purpose of the Land Cruiser, the vast majority of cars in the Russian Federation are operated only in the city, where tuning and car style are put in the first place. That is why the choice of disks for Kruzak is a very sensitive moment for each owner.
ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!
Wheel sizes and parameters for Toyota Land Cruiser 200
According to the manufacturer's regulations, the following parameters are installed on the Toyota Land Cruiser 200: width from 8J to 8.5J, PCD drilling 5 × 150 and a total diameter of 17 to 20 with a 60 mm overhang. At the same time, the recommended rubber sizes are from 17 to 20 radius with a profile of 50-65. Also, on all Toyota Land Cruiser 200 models intended for sale on the European market, fixing nuts M14 * 1.5 are used.
More detailed information is provided in the table below:
| Year of car manufacture | Disc drilling | Disk offset | Size | Permissible tire size |
|---|---|---|---|---|
| 2007-2018 | 5*150 | 60 | 17x8.0 | 285/65 R17 |
| 2007-2018 | 5*150 | 60 | 18x8.0 | 285/60 R18 |
| 2007-2018 | 5*150 | 60 | 20x8.5 | 285/50 R20 |
- J "8" - The total width of the disks in an inch system of measurement;
- R "17" - Diameter of disks in inch system of measurement;
- PCD "5" - Number of mounting holes on the disk;
- Double PCD "150" - The diameter of the circle, on the area of which the mounting holes are located. The value is given in millimeters;
- ET "60" - Disk offset in millimeters;
- d "57.1" - Diameter of the central hole.
Note! The types and parameters of discs, as well as the dimension of the installed rubber on the Toyota Land Cruiser 200, does not depend on the technical equipment of the car or the line of power units.
The platform of the car allows you to install any recommended size of disks on the car without a significant change in performance - the only thing to remember is that larger disks increase the car's cross-country ability, but complicate handling.
If you want to install wheels and tires of non-standard sizes, it is recommended to use the selection of models by the VIN number of the vehicle. To do this, you need to go to the official website of the disc manufacturer and check the compatibility of the desired model by entering the VIN code of the car and the trade article of the disc into the search database. Remember, installing wheels or tires of the wrong size severely limits the operational capabilities of the vehicle, which can cause roll in corners, suspension sway when driving at high speed, or a complete loss of control.
What wheels can be put on the Toyota Land Cruiser 200?
Regardless of the configuration, only alloy wheels are installed on the Toyota Land Cruiser 200 from the factory. However, the owner can change the parts to another model for aesthetic or practical reasons - all car wheels are classified according to the type of materials used in the manufacture. Eg:
- Steel stamped - the most budget type of discs. Stamped discs have a greater margin of safety and can be straightened after hitting road potholes. Of the minuses of the steel variant, it is necessary to note the unpretentious appearance and high mass, as a result of which the controllability of the vehicle is slightly reduced and fuel consumption increases. Stamped wheels are practically not installed on the Toyota Land Cruiser 200 - an exceptional moment is the operation of the car on the road;
- Light alloy cast - usually installed on the Toyota Land Cruiser 200 at the manufacturing plant. Alloy wheels are made of aluminum or titanium and provide better handling and fuel efficiency. The disadvantages of casting are directly proportional to the stampings - alloy wheels simply break in case of a serious impact, which makes them completely unsuitable;
- Forged - the technology for manufacturing forged wheels is significantly different from the production of the above models. The advantages of the forged version are high strength and lightness of construction, due to which the discs are moderately economical and do not deform when they fall into the pit. Of the minuses, it is worth noting the complete absence of energy absorption - all the shocks when driving on uneven roads are completely transferred to the car's suspension, shortening its production resource.
In addition to the price category and aesthetics, rims must be selected depending on the type of vehicle suspension. On the Toyota Land Cruiser 200, the suspension system can consist of both a classic spring version and an air suspension. For example, installing forged wheels on a spring suspension will allow you to transform the car's handling without compromising strength, while for air suspension it is worth installing only alloy wheels - a forged version will significantly shorten the suspension's margin of safety.
What wheels should I take on a Toyota Land Cruiser 200 off-road?
The Japanese SUV has great potential, which can only be fully realized when driving off-road, however, with the wrong choice of wheels and rubber, the car's patency is sharply reduced. For maximum cross-country ability of the car, it is necessary to choose specialized tires with increased lugs, but with the choice of disks everything is a little more complicated:
- When driving on rocky terrain, it would be more rational to put stamped discs - the steel version is more resistant to damage and, if necessary, can be straightened. Casting, on the other hand, will quickly become unusable, and in which case stamped discs can be replaced with a new set - the replacement cost will be many times cheaper than the aluminum or titanium option;
- Before driving on mud or swamps, it is necessary to put casting - light aluminum or titanium wheels will provide greater cross-country ability and controllability, but the steel version will make it difficult for the car to leave the mud, creating additional slip;
- It is better to replace forged wheels before off-road - firstly, such a kit is too expensive, and secondly, it will quickly kill the suspension system, as it does not absorb shocks and vibrations. Forged wheels are recommended for use only when driving on public roads.
Note! Before going off-road, it is imperative to dismantle the caps, if any.
The hubcaps are designed to protect the side of the discs from damage, however, off-road, the extra protection can become an obstacle to the removal of dirt and cooling of the brake system, as a result of which the hub may be damaged or the brake mechanism may fail.
Using the automatic selection of tires and wheels for the car Toyota Land Cruiser 200, you can avoid many problems related to their compatibility and compliance with the recommendations of car manufacturers. After all, they have a huge impact on a significant part of the operational properties of the vehicle, primarily on handling, fuel efficiency and dynamic qualities. In addition, tires and rims in a modern car are one of the elements of active safety. That is why the choice between them should be made as responsibly as possible, which implies the presence of a whole range of knowledge about these products.
Unfortunately, most car owners prefer not to go into such technical nuances. This situation makes the automatic selection system an extremely useful tool to prevent making the wrong choice when buying tires and rims. And he, thanks to the widest assortment presented in the Mosavtoshina online store, is very diverse.
The SUV has been manufactured since 2007, it became the successor to the "100th" series. Unlike previous generations, the model has a new interior, exterior, technical characteristics.
In the period from 2012 to 2015, the model has undergone changes, two restyled versions have been released. Innovations have affected the exterior for the most part. Specifications remain the same.
Sizes of stock wheels for Toyota Land Cruiser 200
The effect of installing non-standard disk sizes on the technical characteristics of the Toyota Land Cruiser 200
The size of tires, disks installed on the car, affect its technical characteristics. Refer to the instruction manual for recommended and allowable sizes.
For a driver who uses the car as a means of transportation, the factory rim sizes are more than enough. In the case of tuning, changes in standard characteristics, dynamic performance, change the car to non-standard wheel sizes.
The list of characteristics that are changed by setting free-form wheel sizes:
- Controllability;
- Road grip;
- Sharpness, responsiveness of the steering wheel;
- Aquaplaning;
- Comfort;
- Noise level;
- Fuel consumption in the combined cycle;
- Protector wear.
Alternative rims for SUV Toyota Land Cruiser 200
- Cast: light weight, low pressure on thrust bearings, hub, transmission;
- Stamped: durable, expensive;
- Forged: strong, one-third lighter than stamped.
| Name / manufacturer / type |
|---|
| Alloy |
| RX 174, 504, REPLAY SB19, SB22, SB23, TY120 TL 302, 311, 405, 408, 414, 422, 423 VENTI 1501, 1506 XTRIKE X103 YOKATTA MODEL-2 KIK JUKE LS 313 ALCASTA M40, M42 MITECH WO02 NZ 704 IFREE DICE |
| stamped |
| VSN CV3, VFS2, VSN CVT-L, CVT-R INFORGED IFG25, IFG17 YOKATTA MODEL-10, YOKATTA MODEL-2 VSN VPS-307T PDW 1004, C-SPEC, PDW 1037, PDW 1037 YST X9, YST X3 ENKEI LM01, ENKEI LK31 FUTEK 420, FUTEK 320 R.W.HF611 BARRET L262 PDW INVADER, PDW CORSA, PDW ROTI CONCAVE, PDW Crank (504601) |
| forged |
| TREBL 7610, 6390, 6085, 53E40M, 5220 X40038, TREBL OFF-ROAD 01 SDT U6028 ARRIVO AR149, AR015 KRKZ HAIMA 3 EURODISK 54A51R, 76J39C KWM RK L24E SDT U5035B, SDT U2093, U4029 GOLD WHEEL MAGNETTO 15000 AM, MAGNETTO NEW STEGER X40014ST |
*check prices in stores at the time of purchase.
And also, high-quality models from the following European and world manufacturers: Advanti, Aero, Aitl, Beyern, Borbet, Cross Street, Dax, Enkei, Kosei, Legeartis, Lumarai, Momo, Race Ready, Vianor.
Deciphering the marking of disks on the Toyota Land Cruiser 200
For example, R18 5×150 6.5J ET60 (see photo):
- PCD (Pitch Circle Diameter) diameter of the circumference of the center of the mounting holes: 95 mm;
- Disk Radius: 18;
- Number of holes 5;
- Fastener type: M15 - stud diameter;
- Thread size (pitch): 1.25;
- Center hole diameter: 73mm;
- Pressure (front / rear): 2.3 / 2.35 bar.
PCD parameter: distance between centers of opposite holes. Measurement of the value with a ruler without dismantling the wheel. For a five-bolt design, the resulting distance must be multiplied by a factor of 1.05.
Rim offset ("ET"): the distance between the disc-to-hub point of contact and the midpoint of the rim width. Designation: DEPORT, OFFSET. The offset is positive if the plane does not go beyond the point of contact, otherwise the offset is negative. The farther the rim is from the body, the more the overhang tends to zero.
- D is the diameter of the central hole, measured in millimeters.
- J, H and subsequent characters in alphabetical order indicate the markings of the humps on the rim shelf. Symmetrical, asymmetric and combined.
- "Hump" is a protrusion on the rim for a tubeless tire. When driving, the "rails" hold the tire beads, preventing depressurization.
Numeric characters indicate the date of issue, month, year.
- TUV is the abbreviation of the regulatory body for compliance with quality standards.
Maximum wheel load: the unit of measurement depends on the country of the manufacturer of the rubber, rim.
- Check the wheel balance on a special diagnostic stand in the workshop. If deviations are found, restore the geometry of the structure. It is impossible to “reanimate” the disk on your own due to the lack of the necessary equipment;
- If you find cracks, dents on the rim, contact the service station for prevention, rolling;
- At high, medium speeds, avoid getting into pits, potholes. The disk is deformed, the tightness is broken, the tire cord is damaged;
- Keep an eye on the pressure in the tires, it should not differ from that recommended by the manufacturer. In case of deviation, pump up yourself, contact the service station;
- Observe the transition to summer, winter regimes. In summer, tire pressure is higher by 0.15 atm., in winter it is lower by the same amount. The parameters are indicated in the vehicle operating instructions;
- Tighten the nuts on the rim with a torque wrench. Excessive tightening contributes to the breakage of the studs, weak - unscrewing. Which will lead to a collision on the road with an oncoming traffic participant.
In sunny weather, cast aluminum wheels are less susceptible to damaging external influences. But in slush, ice, when the road is strewn with chemicals, the rim is susceptible to corrosion. This provokes paint peeling, destruction of the molecular composition, and a decrease in structural strength.
Wash the wheels as they get dirty. Since it is unlikely that it will be possible to wash it with a rag, use high-pressure compressors. Equipment of this class is available at many service stations, workshops, service centers.
Systematic polishing allows you to get rid of scratches. Pre-clean the wheel of dirt, dry thoroughly, and then treat with a chemical. Wipe with a cloth several times.
Store wheels upright, do not stack on top of each other. Clean off dirt, dry, wrap with cellophane. Some motorists practice to apply an aerosol to the surface before conservation.
The average service life of original discs is 150,000 km. Under the condition of a moderate driving style, the replacement interval will increase by a third. The resource of using tires does not exceed 60 - 80 thousand km.
Buy original parts, consumables. Carefully check the catalog numbers, markings, with the data specified in the instruction manual.
Use the services of certified workshops, service centers, service stations. Remember that non-professional intervention in the repair does not guarantee the performance of the technical tool. Handicraft repairs, diagnostics contribute to the cancellation of the factory warranty, denial of service at branded service stations.
