The new GAZ-3110 electronic instrument panel has become much more informative than its predecessor, but even it has some drawbacks. If you want to install such a model of devices in your cabin, be prepared to suffer with the connection - the circuit is not the easiest and has several difficulties.
The design of the new instrument panel Gas 3110
It has a standard instrument panel, consisting of three main round scales and two secondary ones located on the sides. Here is the information a driver can get from their metrics:
- current speed and total mileage;
- engine speed;
- oil level and quantity;
- battery charge;
- amount of gasoline.
The instrument panel is decorated in a gray tone, does not have any bright details, and it is difficult to use it at night. Many users often look for a replacement for it or introduce additional elements into it to improve functionality.
Dashboard illumination for car Gas 3110
But its new version - the GAZ-3110 panel of a new sample - turned out to be more informative and a little more convenient to use. The design of the novelty is designed so that the user first receives the basic information, and only then is distracted by other indicators. Two main large scales display the speed of the car and the engine speed, and the two side scales show information about the amount of gasoline and the condition of the oil. In addition, the new GAZ instrument panel has about 20 secondary indicators, each of which has its own purpose.
In general, the new version of the panel has positive reviews, as it is slightly more convenient to use than the old one. Before installing this model, you should carefully study the instructions for its operation.
Read also
The device of the brake system GAZ-3110
Connecting a new panel
The new dashboard can be easily installed on the old GAZ-3110. 
To do this, you will need to connect all the contacts to the appropriate connectors, and also buy wires and heat shrink. Next, the connection diagram will be described, but before that we will conduct a short acquaintance with the notation and. Each connector is shaped like an oblong pentagon with 13 pins.
The connection numbers are counted as follows: the first contact is the only unpaired one, the second will be the one that is located diagonally from the bottom left, if the connector is located vertically, and if it is horizontal, then diagonally to the top left.
Further, everything is simple: under the second are all paired contacts - 4, 6, 8 - up to 12, and under 3 - all unpaired contacts up to 13. Now the description of the circuit itself. The number is the number of the contact to which the corresponding wire is connected. The pinout for the instrument panel usually comes with the user manual.
from 10 to 99 pcs. - 4290 rubles.
from 100 pcs. - 3990 rub.
Vehicle type:
- "Volga" GAZ-31105;- cars of the Gazelle family;
- cars of the Sobol family.
Engine's type:
- ZMZ-406 (injection options);- ZMZ-405;
- UMZ-4215, UMZ-4216;
- GAZ-560 (Steyr);
- Chrysler DOHC 2.4L.
Technical description
A universal electronic instrument cluster with a central display and an on-board computer, developed by ATPP.
The gearbox is installed instead of a new type of electronic instrument cluster (with four pointers and liquid crystal indicators). In terms of overall, mounting and connecting dimensions, the gearbox is interchangeable with the following combinations of instruments manufactured by Avtopribor Plant JSC (Vladimir):
The gearbox is also interchangeable with electronic instrument clusters manufactured by ZEiM-Line CJSC (Cheboksary) for the above vehicles.
Requirements for the engine control unit
The gearbox is compatible with the following engine control units:
- Mikas 5.4;
- Mikas 7.1;
- Mikas 10.3;
- Mikas 11.3;
- Mikas 12.3;
- Itelma VS5.6;
- SOATE 301;
- SOATE 302;
- SOATE 309.
Note: the gearbox can be operated in conjunction with a control unit that is not in the above list. In this case, the functions of the on-board computer related to fuel consumption will not be available.
Multifunction display
The information field of the display is divided into three functional areas:
- clock and outdoor temperature;
- on-board computer readings;
- distance traveled (daily mileage and total).
The on-board computer calculates and displays the following parameters:
Voltage of the onboard power supply;
- travel time;
- average speed of movement;
- average fuel consumption;
- instantaneous fuel consumption;
- power reserve until the next refueling.
Specifications:
- Supply voltage: 12 V
- Weight: 1 kg
from 10 to 100 pcs. - 2599 rubles.
from 100 pcs. - negotiable price
Vehicle type:
Engine's type:
ChryslerTechnical description
The electronic instrument cluster is intended for use in Volga-3110, Volga-31105, Volga-3102, Gazelle, Sobol vehicles manufactured by GAZ OJSC with engines manufactured by Chrysler.
Specifications:
- Illumination of symbols - green
- Supply voltage: 12 V
- Current consumption in operating mode: 1.5 A
- Working temperature: from -40 to +85 °C
- Dimensions: 384x172x94 mm
- Weight: 1 kg
It is possible to supply various color schemes of the scale:
- white background, red numbers
- white background, blue numbers
- ultra blue background, white numbers
- black background, white numbers
from 10 to 100 pcs. - 2599 rubles.
from 100 pcs. - negotiable price
Vehicle type:
Volga-3110, Volga-31105, Volga-3102, Gazelle, SobolEngine's type:
ZMZ-402, ZMZ-405, ZMZ-406, UMZ-4215, UMZ-4216, SteyerTechnical description
“The universal electronic instrument cluster is designed for use in Volga-3110, Volga-31105, Volga-3102, Gazelle, Sobol vehicles manufactured by GAZ OJSC with ZMZ-402, ZMZ-405 engines , ZMZ-406; "Volga", "Gazelle" with engines UMZ-4215, UMZ-4216, engine manufactured by Steyer, manufactured for the domestic market and export.
The combination housing is compatible with GAZ 3110.3801000 combinations for models 3110, 3102, 31105, Gazelle, Sobol and their modifications in terms of its geometric and seating dimensions.
Specifications:
- Illumination of symbols - green
- Supply voltage: 12 V
- Current consumption in operating mode: 1.5 A
- Working temperature: from -40 to +85 °C
- Dimensions: 384x172x94 mm
- Weight: 1 kg
It is possible to supply various color schemes of the scale:
The combination housing is compatible with GAZ 3110.3801000 combinations for models 3110, 3102, 31105, Gazelle, Sobol and their modifications in terms of its geometric and seating dimensions.
Specifications:
- Character highlighting - red
- Supply voltage: 12 V
- Current consumption in operating mode: 1.5 A
- Working temperature: from -40 to +85 °C
- Dimensions: 384x172x94 mm
- Weight: 1 kg
The instrument panel was stock Vladimirskaya, slightly improved ... namely 1. uniform diode backlight, 2. PWM brightness control, 3. Smooth turning on and off the backlight when the engine starts 4. All possible indicator lights are connected.
I absolutely did not like the tidy from 31105, I found it in Moscow tidy from 3111, produced by RAR (Riga).
The price was even cheaper than the new one from 31105
Studied material:
www.drive2.ru/cars/gaz/31 …rnal/4035225266124025366/
www.drive2.ru/cars/gaz/31 …/288230376152422866/#post
www.drive2.ru/cars/gaz/31 …/288230376152404924/#post
www.drive2.ru/cars/gaz/24 …/288230376152246368/#post
Stage 1
In addition to tidy for installation You need to buy 2 connectors. They fit from: Skoda Octavia, Golf 4, Passat B5, Audi A6…
specifically mine - from the Skoda Octavia.
Then, having disassembled the pads, you need to add the missing wires to the terminals (the terminals are all in the block, but without wires).
After the wires are inserted, we test the tidy for performance
Stage 2
All the tables and diagrams that are on the Internet, according to the links above, came up to me ... but there are errors everywhere ... both in polarity and in purpose. Therefore, I have compiled my purely table “for internal use” and I advise you to do this in a MANDATORY order.
With just a few entries:
1. What block
2. Purpose of the wire
3. The color of the wire in the block (they are also VAG)
4. Signal polarity
5. Color in car wiring
table in progress
When everything is connected, we get something like this picture
Stage 3
Installation of tidy on the torpedo.
I chose the method indicated by the first link at the beginning of the article, it took a lot of time.
left mount
right mount
Installed
Installed
backlight
from afar
At first, I wanted to install additional. backlight as in his old tidy … but as it turned out, the backlight PP 3111 is quite enough in the evening and at night … it is uniform!
Issues identified after installation:
1. Almost all signaling devices on the PCB are designed for the supply of mass! therefore, for such indicators as - open doors, heated mirrors and a rear stele, and I don’t remember what else ... I need to purchase a relay converter from + to - ... I found this only stood only for opening the doors.
2. The temperature indicator does not show correctly!
On 3111 there is no tidy temperature sensor on the thermostat ... apparently they are paired with MIKAS there ... the treatment of this bug is at the stage of reflection ... as I decide, I will unsubscribe here.
3. The tidy can show the outboard temperature ... but I did not find which sensor to connect to it.
To control the systems, the GAZ car is equipped with a combination of instruments in which control devices are installed: a voltage gauge, a tachometer, a speedometer, an engine temperature gauge, an oil pressure gauge, a fuel level gauge and signaling devices. The connection of the contacts of the instrument cluster is shown in the electrical diagrams below, and you can see the location of the electrical connectors in the photographs. The information is provided as a guide to do-it-yourself troubleshooting and do-it-yourself instrument panel replacement.
Scheme and contacts of the Gazelle instrument cluster
Connector XP1
1 Coolant temperature sensor
2 Selection of emergency coolant temperature
3 Emergency low engine oil pressure
4 Oil pressure sensor
5 Fuel level sensor
6 ———-
7 ———-
8 Open bus doors
9 ———-
10 Open interior doors, hood or trunk
11 ———
12 ———
13 Malfunction of the electronic brake force regulator (EBD)
Connector XP2
1 Battery
2 Switching on the starboard turn signal lamps
3 Switching on the lamps of the turn signal indicator of the left side
4 Applying the parking brake
5 High beams
6 Switching on the front fog lamps
7 Gearbox illumination
8 Turning on side lights
9 Turning on the rear fog lights
10 ———
11 Turning on the center differential lock
12 Downshifts
13 Oil pressure sensor type
XP3 connector
1 Housing for analog signals
2 Ignition
3 Corps
4 Tachometer high voltage input
5 Low voltage tachometer input
6 Turn on low beam headlights
7 Battery discharge
8 Ignitions
9 Low brake fluid level
10 Speed sensor
11 Speedometer output to on-board computer
12 Activate heated rear window
13 Malfunction of anti-lock braking system (ABS)
XP4 connector
1 Diagnostic indicator(-)
2 Signaling device for diagnostics (+) and the inclusion of engine preheating (+)
3 Brake lining wear
4 Turn on engine preheating (-)
5 ————-
6 ————-
7 ————-
8 ————-
9 —————
10 ————-
11 Low washer fluid level
12 Low coolant level
13 Low engine oil level
The pin assignment of instrument clusters of the 38.3801 family in various versions is shown in the table:
| Output Destination | 38.3801 | 382.3801 | 385.3801010 |
| Carburetor choke control lamp | X1.1 | X1.1 | X1.1 |
| Coolant temperature gauge | X1.2 | X1.2 | X1.2 |
| Control lamp of an overheat of a cooling liquid (-) | X1.3 | X1.3 | X1.3 |
| Low oil pressure warning light | X1.4 | X1.4 | X1.4 |
| Oil pressure gauge | X1.5 | X1.5 | X1.5 |
| Fuel gauge | X1.6 | X1.6 | X1.6 |
| Fuel reserve indicator lamp (-) | X1.7 | X1.7 | ― |
| Warning lamp for unfastened seat belts | X1.8 | ― | |
| Test (-) | X1.9 | ― | |
| Control lamp of open doors (-) | X1.12 | X1.10* | |
| Oil overheat warning lamp | X1.11 | X1.11* | |
| Circuit 30 (permanent power) | ― | x2.2 | |
| Combined STOP warning lamp output | x2.2 | ― | |
| Control lamp of the right index of turn | X2.3 | X2.3 | X2.3 |
| Control lamp left direction indicator | X2.4 | X2.4 | X2.4 |
| Parking brake warning lamp | X2.5 | X2.5 | X2.5 |
| Control lamp of inclusion of a high beam of headlights (+) | X2.6 | X2.6 | X2.6 |
| Control lamp of inclusion of fog lamps (+) | X2.7* | ||
| Pilot lamp trailer direction indicators (+) | ― | ||
| Downshift indication (-) | X2.8* | ||
| Center differential lock indication (-) | X2.9 | X2.9* | X2.9* |
| Seat heating control lamp (+) | X2.10 | ― | |
| Control lamp of inclusion of back fog lamps (+) |
X2.11* |
||
| Control lamp of inclusion of dimensional lighting (+) | X2.7 | X2.12 | X2.12 |
| Instrument lighting circuit | X2.13 | X2.13 | X2.13 |
| Catalytic Converter Overheat Warning Lamp | x2.8 | ― | ― |
| Airbag Warning Light (+) | X2.11 | ― | ― |
| STOP indicator lamp | X3.6 | ― | ― |
| ABS warning lamp (-) | X3.1 | X3.1 |
X3.1, inverse |
| Weight (-) | X3.2 | X3.2 | X3.2 |
| Power (+) speedometer | X3.3 | X3.3 | X3.3 |
| Weight (-) speedometer | X3.4 | X3.4 | X3.4 |
| Tachometer (high voltage input) | ― | X3.5 | X3.5* |
| Tachometer (low voltage input) (-) | ― | X3.6 | X3.6 |
| Tachometer (in the course of the generator) | X3.7 | ― | ― |
| Control lamp of a passing range of headlights (+) | X3.7* | ||
| Control lamp of heating of back glass (+) | X3.8 | X2.1* | X3.8 |
| Speedometer output to onboard computer | X3.9 | X3.9 | X3.9 |
| Speedometer input | X3.10 | X3.10 | X3.10 |
| Brake Fluid Level Warning Light (-) | X3.11 | X3.11 | X3.11 |
| Power (+) control lamps and instruments | X3.12 | X3.12 | X3.12 |
| Battery discharge warning lamp | X3.13 | X3.13 | X3.13 |
| Oil level warning lamp | X4.1 | X4.1* | X4.1* |
| Control lamp CHECK ENGINE (+) | X4.2 | X4.2 | X4.2 |
| Common output of CHECK ENGINE control lamps and heating of glow plugs (-) | X4.3 | X4.3 | X4.3 |
| Brake pad wear warning lamp (-) | ― | ― | X4.4* |
| Glow plug warning light (+) | ― | ― | x4.5 |
| Coolant level warning light (-) | X4.8 | X4.8* | X4.8* |
| Washer fluid level warning light (-) | X4.9 | X4.9* | X4.9* |
| Power steering fluid level warning light (-) | X4.10 | X4.10* | X4.10* |
| Control lamp for the presence of water in the fuel filter (+) | ― | ― | X4.11* |
| Burnt out lamp indicator (-) | X4.11 | X4.11* |
Instrument cluster of the old type 384.3801-10
New type instrument cluster 385.3801-10
GAZ Gazelle business 4x4 Titanium - pinout
1 - not connected
2 - 382.3801 has an open door signaling device (may not be). You can run a wire to the limit switch on the driver's door.
3 - 382.3801 has an oil overheating signaling device (may not be). You can run a wire to the TM-108 overheat sensor, put the sensor itself into the crankcase.
4 - 385.3801 has an open door signaling device (may not be). You can run a wire to the limit switch on the driver's door.
5 - 382.3801 test. If ground is applied to this contact, then the brake fluid level, oil overheating, open doors and coolant overheating indicators light up. Can be connected to a button or relay. In the second case, the relay winding is connected to ground and the wire from the lock to the starter (that is, when the starter is turned on, the lamps will be tested).
6 - 382.3801 has an indicator of unfastened seat belts (may not be).
7 - 382.3801 has a fuel reserve indicator. Connect the blue wire with the red stripe.
8 - fuel gauge. Connect to pink wire with red stripe.
9 - oil pressure gauge. At 382.3801, run a wire to the sensor (you need a VAZ-2106 tee) from GAZ under the ZMZ-406 engine. At 385.3801, if you put the sensor, it will squeak about low pressure at XX, so the sensor is not needed, you need to connect the wire from the tidy to ground through a resistor, select it experimentally.
10 - emergency oil pressure alarm. Connect to the gray wire with the blue stripe.
11 - signaling device for engine overheating. It can be connected to the overheating sensor ТМ-111-02. The sensor itself must be in contact with the coolant.
12 - coolant temperature gauge. Connect to green wire with white stripe. The pointer will exaggerate the readings, you can connect a resistor to the wire break, select it experimentally.
13 - signaling device for covering the air damper of the carburetor. Connect to a gray wire with an orange stripe if the car is carb.
14 - for 382.3801 the signaling device can stand, it will light up when the mass is applied.
15 - low gear signaling device (may not be), will light up when mass is applied.
16 - differential lock signaling device (may not be), will light up when mass is applied.
17 - for 382.3801, the seat heating indicator will light up when a plus is applied.
18 - rear PTF signaling device (may not be), will light up when a plus is applied.
19 - side lights signaling device. Connect to yellow wire.
20 - instrument lighting lamps. Connect to white wire.
21 - for 385.3801, the counter is powered. Connect to a permanent power supply (red-white wire of the stop switch).
22 and 23 - signaling devices for the indicator of the right and left turns, respectively. Can be connected together and connected to a blue wire with a white stripe (the arrows will light up with the left or right turn signal), or to the emergency gang switch: blue - right, blue-black - left, insulate the blue wire with a white stripe (each arrow will correspond to the inclusion of its own turn signal).
24 - parking brake signaling device. Connect to brown wire.
25 - headlight high beam signaling device. Connect to green wire with black stripe.
26 - front PTF signaling device (may not be), it will light up when a plus is applied.
27 - ABS signaling device. When mass is applied, it will light up.
28 - for 385.3801 rear window heating indicator. Lights up when positive is applied.
29 - speed signal output to the on-board computer. If it is, then take the speed signal from this contact.
30 - to the vehicle speed sensor.
31 - signaling device for low brake fluid level. Connect to the pink wire with a blue stripe that goes to the lamp above the cigarette lighter.
32 - power supply for lamps and appliances. Connect to orange wire with blue stripe.
33 - battery charge indicator. Connect to brown wire with white stripe.
34 - mass. Connect to black wire.
Wow I wrote so much...
35 - speedometer power supply. Connect to orange wire.
36 - weight of the speedometer. Connect to white wire with black stripe.
37 - tachometer. Connect to the brown wire with a blue stripe, but if the reading drops, connect to pin 38.
39 - for 385.3801, the low beam signaling device (may not be), will light up when a plus is applied.
40 - low oil level indicator (may not be), lights up when mass is applied.
41 - if the machine is injection, connect to the orange wire too.
42 - if the machine is injection, connect to the remaining wire (I don’t know the color), it went to the 8-terminal block on the old tidy.
43 - brake pad wear indicator (may not be), lights up when mass is applied.
44 - signaling device for glow plugs.
45 and 46 - not connected.
47 - low coolant level indicator (may not be), lights up when mass is applied.
48 - low washer fluid level indicator (may not be), lights up when mass is applied.
49 - signaling device for low power steering oil level (may not be), lights up when mass is applied.
50 - signaling device for burnt out lamps for 382.3801 or the presence of water in the fuel filter for 385.3801 (may not be), it will light up when the mass is applied.
51 and 52 - for 382.3801 signaling devices (may not be), it will light up when mass is applied.
The purpose of the elements on the instrument panel GAZ
1 - voltmeter indicates the voltage in the on-board network of the GAZ car;
2 - control lamp of the engine management system;
3 - reserve (or abs malfunction indicator lamp on a Volga GAZ car equipped with an anti-lock braking system);
4 - light panel "STOP". Lights up simultaneously with one of the warning lamps for malfunctions, if further movement with this malfunction is prohibited;
5 - control lamp for turning on the left turn signal. The lamp lights up simultaneously with the left turn indicators. If one of the indicator lamps fails, the control lamp flashes at a double frequency;
6 - control lamp for emergency drop in brake fluid level. The lamp lights up when the fluid level drops (below the minimum allowable) in the reservoir of the main brake cylinder. As the brake pads wear out, it is necessary to top up the brake
liquid;
7 - odometer (total mileage counter);
8 - speedometer indicates the speed of the car;
9 - control lamp for turning on the parking brake. The lamp burns at the raised lever of a lay brake and the included ignition. 10 - control lamp for turning on the right turn signal. The lamp lights up simultaneously with the right turn indicators. If one of the indicator lamps fails, the control lamp flashes at a double frequency;
11 - reserve;
12 - warning lamp for unfastened seat belts (installed on some Volga GAZ 31105 cars);
13 or 18 - control lamp for emergency oil pressure drop in the engine lubrication system. The lamp should light up when the ignition is turned on and go out after starting the engine. If the light stays on after the engine has started, or comes on while the engine is running, stop the engine immediately and check the oil level. The level is normal - the engine is faulty. For a car with high mileage, the lamp may light up when the engine is idling;
14 - reserve (for installing additional control lamps);
15 - fuel gauge. The instrument shows the approximate amount of fuel in the tank. Divisions are marked on the scale 0 - empty tank; 1/2 - half a tank; 1 - full tank:
16 - fuel reserve control lamp. The lamp turns on when the remaining fuel in the tank is less than 8 liters; 17 - oil pressure indicator in the engine lubrication system allows you to evaluate the technical condition of the engine;
19 - control lamp for turning on seat heating (for GAZ 31105 vehicles with heated seats);
20 - coolant temperature gauge allows you to control the temperature of the engine;
21 - control lamp for switching on external lighting (side light);
22 - control lamp for overheating of the coolant turns on when the temperature of the coolant rises above the permissible value;
23 - control lamp for switching on the high beam headlights. The lamp turns on when the high beam headlights are turned on;
24 - button for setting the daily mileage counter to zero. In order to reset the meter readings, you must press the button;
25 - car daily mileage counter. To reset the meter readings, press the zero setting button (pos. 24);
26 - tachometer. The device shows the frequency of rotation of the crankshaft of the engine;
27 - battery discharge indicator lamp. The lamp should light up when the ignition is on, and go out after the engine is started. Burning lamp with the engine running may indicate a malfunction of the generator or its circuits.
Replacing the old instrument cluster with a new one
Many car owners of a Gazelle or Volga car with an old-style instrument panel tend to change it to a new-style instrument panel, in which most of the indicators have been replaced with modern LEDs, and such an instrument panel looks much prettier and brighter.
So, to remove the instrument cluster, first remove the lining by unscrewing the four screws. Then unscrew the four screws securing the combination; disconnect electric sockets and remove a combination of devices. Repair the instrument cluster by block replacement of faulty instruments. To replace devices, remove the protective glass and unscrew the nuts securing the defective device on the reverse side.
The reason why many drivers install the Gazelle Business dashboard is that it looks better. The second reason why you should buy this particular version of the panel is the functionality and an increased number of opportunities to monitor the performance of the car.
The euro type panel has 2 large dials - a speedometer and a tachometer, as well as 2 small ones, which show the amount of gasoline and the temperature of the coolant. The rest of the information about the state of the nodes and the errors that have occurred is displayed using the burning signaling devices in the middle of the panel. A simpler design significantly relieves the driver's attention.
Video instruction for panel installation
Combinations and dashboards "Avtopribor": 14.3805010, 144.3805010, 17.3805010, 21.3805010, KP116-3805010, 151.3801010-03, 155.3801010-03, 352.3801010, 37.3801010-02, KP129-3801010....
1 km run - 1000 Electronic tachometer reading range 0-8000 rpm Reading range of temperature gauge receiver 50-130 °С Fuel level sensor resistance 238 Ohm VAZ-21213 Instrument cluster 37.3801010-01 (37.3801SPORT) Supply voltage, V - 12 Connecting size of the speedometer with a flexible shaft, mm (according to GOST 12391) M16x1 square 2.7 (A3) Speedometer reading range 0-180 km/h The number of revolutions of the flexible shaft, corresponding to 1 km of run - 1000 Electronic tachometer reading range 0-8000 rpm /min Reading range of the temperature gauge receiver 50-130 °С Fuel level sensor resistance 238 Ohm VAZ-21213 TUNING (pale blue scales) Instrument cluster 37.3801010-02Electrical equipment of the Vladimir plant Avtopribor
Our group of companies "Auto-Alliance" successfully sells products manufactured by JSC "Plant" Avtopribor ", Vladimir. The assortment includes more than 400 items of electrical equipment. These are levers, wiper blades and drives, instrument clusters, instrument panels, electronic and electromechanical speedometers, indicators, pressure gauges, tachometers, ammeters, electric motors, sensors, relays of various modifications and much more....
sphere in production. The Avtopribor team works every day to achieve a leading position in the automotive components market. Also, the plant carries out work and measures to improve the quality of products and the material component of each employee. Focusing on the accumulated experience, the plant has chosen the right strategy and continues to develop steadily today. The highly qualified personnel of Avtopribor cope with any task, and the technological capabilities that accompany their work are aimed at developing production. The main consumers of the plant's products are the following large automotive enterprises: Avto-Vaz OJSC, RAO GAZ, UAZ OJSC, KAMAZ OJSC, FORD CJSC, Sollers-Naberezhnye Chelny OJSC, PAZ LLC, OJSC AZ Ural, RUE MAZ, OJSC ZMZ, AMO ZiL, CJSC ZAZ. Thus, the geography of the scope of the company's activities extends from Yekaterinburg to Minsk. About products trusted by respected automotive giants
