Certificate of certification of welding technology. Naks certification of welders and welding production specialists: preparation for all levels

1. Lifting cranes
2. Pipe laying cranes.
3. Cranes - manipulators.
4. Elevators.
5. Tali.
6. Winches.
7. Load-handling devices.
8. Lifts (towers).
9. Escalators.
10. Ropeways, their units, mechanisms and parts.
11. Chains for material handling equipment
12. Construction lifts.
13. Passenger conveyors.
14. Metal structures for handling equipment

KO (Boiler equipment)

1. Steam boilers with a steam pressure of more than 0.07 MPa and hot water boilers with a water temperature above 115°C.
2. Steam and hot water with a working steam pressure of more than 0.07 MPa and a water temperature of over 115°C.
3. Vessels operating under pressure above 0.07 MPa.
4. Fittings and safety devices
5. Metal structures for boiler equipment.

GO (Gas equipment)

1. Pipelines of internal gas supply systems.
2. External gas pipelines of low, medium and high pressure steel.
3. Gas equipment for boilers, process lines and units.
4. Gas burner devices.
5. Capacitive and instantaneous water heaters.
6. Apparatuses and ovens.
7. Fittings made of metal materials and safety devices.

NGDO (Oil and gas production equipment)

1. Field and main oil product pipelines, pipelines of oil pumping stations (OPS), providing transportation of oil and oil products during construction, reconstruction and major repairs.
2. Field and main oil product pipelines, pipelines of oil pumping stations (OPS), providing transportation of oil and oil products at current repairs during operation.
3. Field and main gas pipelines and condensate pipelines; pipelines for transporting commercial products, pulsed, fuel and starting gas within: integrated gas treatment plants (CGTUs), compressor stations (CS), booster compressor stations (BCS), underground gas storage stations (UGS), gas distribution stations (GDS), gas flow measurement units (UZRG) and gas reduction points (PRG).
4. Pipelines within the gas treatment facility, compressor station; NPS; SPHG; DKS; GRS; UZRG; PRG, etc., with the exception of pipelines providing transport of gas, oil and petroleum products.
5. Tanks for storing oil and petroleum products, gas tanks for gas storage facilities during construction and repair.
6. Offshore pipelines, offshore facilities (pipelines on platforms, as well as welded foundations of offshore platforms) during construction, reconstruction and repair.
7. Unique objects of the oil and gas industry during construction and repair (operating parameters of the objects are not provided for by the current regulatory documentation)
8. Shut-off valves during production and repair in factory conditions.
9. Pipeline parts during production and repair in the factory.
10. Pumps, compressors and other equipment during production and repair in factory conditions.
11. Oil and gas pipelines during production and repair in factory conditions.
12. Oil and gas field, drilling and oil refining equipment.
13. Pipelines of automated gas filling compressor stations (CNG filling stations).

OKhNVP (Equipment for chemical, petrochemical, oil refining and fire and explosion hazardous industries)

1. Equipment for chemical, petrochemical, and oil refining industries operating under pressure up to 16 MPa.
2. Equipment for chemical, petrochemical, and oil refining industries operating under pressure of more than 16 MPa.
3. Equipment for chemical, petrochemical, and oil refining industries operating under vacuum.
4. Tanks for storing explosive and fire hazardous and toxic substances.
5. Isothermal storage facilities.
6. Cryogenic equipment.
7. Equipment for ammonia refrigeration units.
8. Ovens.
9. Compressor and pumping equipment.
10. Centrifuges, separators.
11. Tanks, containers (barrels), cylinders for explosive and fire hazardous and toxic substances.
12. Waste heat boilers.
13. Energy technology boilers.
14. Boilers HERE.
15. Pipeline fittings and safety devices.
16. Process pipelines and pipeline parts.

Certification of welding technology NAKS in Moscow. Entry into the NAKS register

As a rule, production certification has three gradations: primary, periodic and extraordinary. All welding (surfacing) technologies are subjected to primary certification. It is planned to carry out initial certification by organizations during the production, as well as installation and repair of technical devices located at hazardous production facilities.

NAKS certification - what is it?

The presence of the NAKS Certificate confirms the presence of the necessary components at the enterprise for the corresponding modern requirements NACS during implementation welding work.

The requirements of the NAKS System include the presence at the enterprise necessary equipment, materials, regulatory framework that meets the requirements of the staff of both blue-collar professions and engineering specialists. In addition, all welded joints performed must be made in accordance with regulatory and technical documentation, which is confirmed by control of a non-destructive testing laboratory.

To carry out certification, the enterprise submits an application to the Certification Center accredited by NAKS. The application must contain confirmation of information on the use of technologies corresponding to regulatory documentation, on the availability of material and technical support of the enterprise, and on the appropriate staff of employees involved in carrying out welding work in accordance with the declared technology.

Certification of welding technology: types of certification

Walkthrough welding technology certificationindicates the enterprise’s compliance with Nax technologies. Such enterprises have the necessary technical means, have organizational capabilities and a staff of qualified employees. Welding joints performed by certified enterprises comply with the regulatory and technical documentation bases.

Manufacturing technology certification is divided intoprimary, periodic and extraordinary. The choice of certification type depends on how long the company has been conducting activities related to the provision of installation, production or repair services using welding.

Primary certification.This is carried out if the company is using welding technology for the first time or changes have been made to the technology since the last certification.

Periodic certification.It is used in enterprises that constantly carry out welding work once every four years. Also, organizations that were previously engaged in welding work, but there was a break in their work that lasted more than one year, undergo periodic certification. With the help of periodic certification, the right to carry out welding work on complex and dangerous objects is confirmed.

Extraordinary certification.Rostechnadzor can organize an extraordinary certification if an enterprise engaged in production, installation, repair, reconstruction work, structures and technical devices, intended for use in complex and life-threatening facilities, violations or non-compliance with documentation requirements in the field of safety were detected. In other words, if the heads of technical services. control noticed changes in the quality of products, Rostechnadzor may appoint this type certification to determine whether production meets the necessary requirements.

Documents for certification of NAKS technology

To carry out certification of the NAKS technology, the applicant enterprise is obliged to collect the necessary package of documents:

technological documentation (instructions for welding work, description of the technology used to carry out welding work, technological map);

a copy of the statutory documentation of the enterprise;

application for certification with the necessary attachments;

a copy of the NAKS certificate (for each worker and specialist);

a copy of the agreement with the NDT laboratory and a copy of the certificate confirming the certification of the laboratory;

copies of attestation certificates and certificates of welding materials;

NAKS certificate (welding equipment);

certificates for basic materials (pipes, pipes)

Technology certification process at NAKS

After collecting the necessary documentation, the certification center, together with a representative of the enterprise, must draw up a certification program. In fact, the entire program is usually compiled by specialists from certification centers, and the applicant’s representative endorses and stamps the Required documents to pass the test.

Based on the above documentation, the certification center, together with the applicant enterprise, carries out welding robots in production conditions and the finished product is tested in laboratory conditions, in a certified laboratory.

The test results are the basis for issuing a conclusion by the laboratory. These results are attached with the rest of the documentation, which is subsequently transferred to NAKS.

Pass the NAKS welding technology certification in Moscow

Reasons to use CenterConsult services:

Certification of welding technology is carried out on a turnkey basis. We will help you collect all the necessary documents.

Short certification period - only 5 weeks.

We work with all regions of the Russian Federation.

Favorable conditions and reasonable prices.

Timeliness and quality of work performed (with entry into the register).

Why should you turn to Centerconsult for help?

Certification of NAKS technology on a turnkey basis!

Express certification of NAKS in a short time

NAKS is the National Welding Control Agency and is structural unit SASv – welding production certification systems.

Certification is based onrules for certification of welders and specialistswelding production.

• NAKS level 1 from 45,000 rub*
• NAKS level 2 from 45,000 rub*
• NAKS level 3 from 50,000 rub*

Exact prices for NAKS certification are calculated upon application.

Registration No. 1721

Excerpts from the RULES FOR CERTIFICATION OF WELDERS AND WELDING SPECIALISTS

I. General provisions

1.1. SASv installs four levels vocational training:

1. Level I— certified welder;
2. Level II— certified master welder;
3. Level III- certified technologist - welder;
4. IV level- certified engineer - welder.

Assignment of a level does not cancel the assigned qualification category current system according to the All-Russian Classifier of Worker Occupations, Employee Positions and Tariff Grades (OKZ 016-94), put into effect by Resolution of the State Standard of Russia dated December 26, 1994 No. 367.

1.2. Certified welders and welding production specialists are allowed to perform those types of activities that are specified in their certification certificates.

1.3. Welding production specialists participating in the work of certification bodies must be certified for the right to carry out work on the training and certification of welders and welding production specialists.

III. Requirements for professional training of welders and welding production specialists

3.1. A candidate applying for any level must have general education and professional training in accordance with the requirements given in Appendix 2, table. 1.

3.2. Before certification of welders and welding production specialists, special training must be carried out according to programs approved by the Gosgortekhnadzor of Russia. Programs should be drawn up taking into account the level of professional training of specialists and the areas of their production activities and include sections on welding equipment, basic and welding materials, welding technology, quality control of welded joints, defects in welded joints and methods for their correction, as well as rules for the safe performance of welding work. By decision of the commission, welding production specialists who have passed special training independently in accordance with the approved program.

3.3. Requirements for the required industrial work experience in the specialty of certified welders and welding production specialists are given in Appendix 2, table. 2 and 3.

IV. Certification of welders

4.1. Welders are subject to certification for the right to perform welding and surfacing work using specific types (methods) of fusion welding, carried out manually, mechanized (semi-automatic) and automated methods when working at facilities controlled by the State Mining and Technical Supervision of Russia.

4.2. After certification, the welder is assigned level I of professional training (certified welder).

4.3. Certification of welders is divided into primary, additional, periodic and extraordinary.

4.4. Primary certification Welders who have not previously had access to welding and/or surfacing (hereinafter referred to as welding) of connections of equipment, structures and pipelines controlled by the Gosgortechnadzor of Russia are undergoing training.

4.5. Additional certification Welders who have passed the initial certification pass before their admission to welding work not specified in their certification certificates, as well as after a break of more than 6 months in performing welding work specified in their certification certificates. During additional certification, welders pass special and practical exams.

4.6. Periodic certification All welders pass in order to extend the specified validity period of their certification certificates for performing the relevant welding work. During periodic certification, welders pass special and practical exams.

4.7. Extraordinary certification welders must pass before they are allowed to perform welding after their temporary suspension from work for violation of welding technology or repeated unsatisfactory quality of production welded joints made by them. During extraordinary certification, welders pass general, special and practical exams.

4.8. For initial certification welders are allowed who have:
— the category is not lower than that specified in the guidelines and normative-technical documentation for welding of objects controlled by the Gosgortekhnadzor of Russia;
— the required minimum work experience in the specialty;
— certificate of completion of special theoretical and practical training in the certified area of ​​activity.

4.9. Certified welder must be able to perform welding work in accordance with the requirements technological documentation and safety rules. 4.10. The procedure for the certification of welders is set out in the “Technological Regulations for the Certification of Welders and Welding Specialists.”

V. Certification of welding production specialists

IN mandatory The following specialists are subject to certification:
— at level II: specialists whose written or oral instructions are mandatory for welders to carry out when carrying out welding work (foremen, foremen, etc.);
- at level III: specialists who are heads of individual departments of the enterprise that ensure the implementation of welding work, and whose signature is necessary and sufficient for the use of documents defining the technology of welding work at the enterprise (heads of departments, laboratories, sectors, technical bureaus, heads of working groups and etc.);
- at level IV: specialists who are managers of the welding service of the enterprise (organization), whose signature is necessary and sufficient for approval by the management of the enterprise (organization) of the leading and regulatory documents for performing all types of welding work (chief ones, their deputies, etc.).

VI. Registration of certified welders and welding production specialists

6.1. Certified persons receive certification certificates in the established form.
The validity period of the certificate during initial certification for welders is 2 years, for welding production specialists of levels II and III - 3 years, and level IV - 5 years.

6.2. The procedure for registering welders and welding production specialists is given in the “Recommendations for maintaining a register of the certification system for welders and welding production specialists.” Upon expiration, the certification certificate can be extended by the certification center that conducted the initial certification and issued the certification certificate in the prescribed manner. The certificate can be renewed without the examination procedure no more than two times. It is prohibited to renew an expired certificate.

VII. MONITORING COMPLIANCE WITH THE RULES FOR CERTIFICATION OF WELDERS AND WELDING SPECIALISTS
Monitoring compliance with these Rules is carried out by the bodies of the Gosgortekhnadzor of Russia by conducting periodic inspections of the work of certification centers and points.

REQUIREMENTS FOR CANDIDATES FOR CERTIFICATION
Candidate preparation requirements

Level	Minimum total education	Professional training for welding production
I	Average; incomplete	Training in vocational schools, at special courses (including at the place of work) according to programs approved in the prescribed manner.
II	Secondary, secondary technical; higher technical	Training in advanced training centers according to programs approved in the prescribed manner, as well as independently in the process of work in the field of welding.
III	Higher technical; secondary technical in welding production	Advanced training in advanced training centers. The necessary knowledge can also be obtained independently by persons with higher and secondary technical education in the process of working in the field of welding.
IV	Higher specialized in welding production *)	Advanced training in advanced training centers or independently while working in the field of welding.

1. Higher specialized education in welding production for persons with higher technical education can be obtained through professional retraining at universities or advanced training institutes in accordance with the Law of the Russian Federation “On Education” dated January 13, 1996 No. 12-FZ (Collection of Legislation Russian Federation, 1996, No. 3, Art. 150).
2. Level IV can be obtained by persons who do not have a higher specialized education in welding production, but have academic degrees of candidates or doctors technical sciences in welding specialty.

Requirements for the minimum work experience in the specialty required to admit a welder to primary certification

* Solution certification commission the minimum production experience may be reduced, but in any case it must be at least six months for certification for access to manual and floor automatic welding and at least three months for certification for admission to automatic welding. To perform welded joints of non-critical structures, in agreement with the bodies of the State Technical Supervision Authority of Russia, graduates of vocational schools or training plants who do not have industrial experience may be admitted to the initial certification.

Requirements for the minimum work experience in the specialty required for admission of a welding specialist to primary certification

General education	Work experience, months
	certification for level II	Level III certification
	uncertified	Level II specialist	uncertified
Higher technical degree in welding production	6	6	18
Secondary technical in welding production	9	9	24
Higher technical, secondary technical	12	12	36
Average	36	—	—

(-) - the candidate cannot be certified to the appropriate level.

Registration objects.

— Registration objects are subject to registration and accounting in the register in the following sections:

• — organizational and methodological documents of SASv
• — decisions of the governing bodies of NASv
• — licensed bodies of SASv
• — certified SASv personnel

Objects of registration are entered into the register on the following grounds:

• — SASv guidelines— based on the order of the President of NAKS on approval of the document;
• — certification centers— on the basis of a license from the Gosgortekhnadzor of Russia and a certificate of conformity issued by NAKS;
• — certification points— based on the written submission of the certification center and the expert opinion of NAKS;
• — specialists of I, II and III levels of professional training- based on information from the certification center or the head certification center about their certification;
• — specialists of the IV level of professional training- based on the submission of the head certification center about their certification;
• - certified experts- based on the protocol of the Governing Scientific and Technical Council of NAKS on the approval of the expert;
• - certified examiners- based on the protocol of the certification center that conducted their certification;
• — decisions on suspension or exclusion from the register of objects of registration- based on the order of the President of NAKS.

After certification by NAKS and successfully passing the exam, the trained specialist receives:

• — certification certificate of a welding production specialist of a certain level (certified welder);
• — welder certification protocol;
• — certificate of completion of special training.

ATTENTION!
To check the legality of the documents we issue, you can use the certificate number and protocol; a trained specialist will be able to find himself in the NAKS register. To do this you need to go to this link and you will be included in the NAKS register.

ATTENTION!
Without registration number register, certification certificates of welders, specialists and examiners, experts, decisions on recognition, decisions on suspension or exclusion from the register of objects of registration are considered invalid.

Tickets for certification of welders NAKS (welding certification) can be obtained by writing to our email sales@site

If you passed Nax training in 2017 year and not only, you can find yourself using this link by entering only your ID number. Check yourself in the NAX register and find tax by welder's mark number you can follow the link.