Washing your car with a rag and a bucket is fine, but it's somewhat outdated. Have you ever seen such an old-fashioned way to clean cars at car washes? If so, then don't go back there. They obviously save on quality and neglect their employees. So, in this article we will talk about how to do a car wash with your own hands. The piece is very interesting and useful.
High Pressure Car Wash Features
We can say that such equipment is not a luxury. Today it is already a necessity. The fact is that this is the only way to qualitatively wash the engine compartment, the bottom and the body of the car. But most importantly, it does not require almost any effort. All you need is 20 minutes of attention.
Although we will assemble the equipment ourselves, that is, in our workshop, we will need purchased parts, which, unfortunately, are often not possible to find in our garage. The first thing we need is a high performance pump. It must create a pressure of 100 to 200 bar. Such equipment will be quite productive and perfect for the implementation of our goals. When choosing a pump, you need to pay attention to what material it is made of. For example, the piston group is metal or ceramic alloy, and the block heads are brass. Of course, you can go the other way and use a compressor instead of a high pressure pump. It will be cheaper, but the system will be less productive. 
Motor selection
We can not do without a good engine. It makes sense to dwell on a single-phase motor of low power. By the way, you can find it in your garage or remove it from an old washing machine or similar equipment. In general, the power of 200-300 watts is quite enough. A single-phase motor is an order of magnitude safer than a three-phase one in terms of connection and somewhat more economical, so we will focus on it. But whether a condenser and a gearbox will be provided in your car wash is up to you. Such equipment can extend the life of the system, but significantly complicate the design. In addition, these elements are not mandatory at all, everything will work fine without them. In any case, do-it-yourself car wash is not so difficult. Let's move on to the practical part. 
DIY high pressure car wash
Before proceeding directly to the assembly, it is necessary to acquire additional elements. We need a coupling to connect the pump and the electric motor together. It is best to take the so-called soft coupling, which will compensate for the slight misalignment of the shafts.
Another important element is the water tank. In this case, the ideal solution would be a plastic tank. It is easier to carry than metal, and in terms of durability it is not inferior to the latter. It must be connected to the water supply network so that there is always water in our container. At the outlet of the tank, we install a fine mesh that acts as a filter. It will protect the pump from damage by foreign bodies. Well, now let's see how a do-it-yourself high-pressure car wash is assembled. 
Construction assembly
In general, there is nothing complicated here. By the way, it is desirable to install a performance regulator. This element is optional. The fact is that an automatic unloading valve is supplied with it, which, in which case, relieves pressure and relieves the load from the pump. The regulator is necessary in order to change the pressure in the system. Therefore, you can set it to the maximum - and the jet will be very powerful - and to the minimum - in a weak mode of operation.
A metal frame is used as a single base for all assembled parts and assemblies. An electric motor, a pump and a gun with a nozzle are fixed on it. All this is interconnected with the help of high pressure hoses. Pay attention to the quality of the connections, as they will be subjected to serious stress during operation. After the structure is assembled, the mini-car wash is ready to go. Check it out. If everything is in order, then you can use it. In case of insufficient pressure, we check the tightness of the connections and the operation of the pump.
Homemade car wash and its features
We have already figured out that it will be much cheaper to buy all the parts and assemble them yourself and get the finished equipment. But I would like to note that a homemade car wash has a number of features. Firstly, its repair is greatly simplified. In particular, we are talking about the replacement of failed nodes. Secondly, you can use any nozzle. If you need to get a concentrated jet, one type will do, if a scattered one, another.
Many people make mistakes at the stage of connecting the sink to the central water supply. The fact is that the length of the hose should not exceed 7 meters. This will eliminate possible pressure surges. If you neglect this requirement, then nothing good will happen. In the case when the mini-car wash is powered by a tank, you need to carefully choose its volume. It is advisable to take a container of at least 30 liters and equip it with a check valve so that during operation it is possible to build up pressure. If you often wash a heavily soiled car at low temperatures, you will need a homemade car wash foamer. The price of purchased equipment is about 5-9 thousand rubles. Agree, the amount is rather big. It can be made from a conventional plastic sprayer, which is then connected to the sink. 
Need to take into account
In general, we figured out how to make a car wash. There is nothing complicated, as you can see. But there are a few simple rules that will help extend the life of such equipment. Periodically it is necessary to check the reliability of connections, including threaded ones. If they are loose, don't forget to tighten them up. Since the tank has a filter element in the form of a mesh, it will gradually become clogged. If it is not cleaned, then in the end the permeability of water to the pump will decrease. Do not forget to periodically inspect the filter, if necessary, change or clean. Well, when assembling the structure, use the popular drawings of car washes, one of which you can find in this article. They will help you navigate what's what, and carry out the installation correctly. 
Conclusion
Do-it-yourself car wash is easy. How much longer can you sit and think: “Why don’t I do the sink myself?” If in the end you take it and start, then the assembly work will end in a few hours. In any case, it makes sense to remember that the paintwork of your car is not eternal and needs to be carefully monitored. By the way, many car enthusiasts do not recommend using car washes with a pump that creates a pressure of more than 200 bar. If such equipment is used at full capacity, then there is a chance of damaging the paintwork of the car. And the loads on the engine and working bodies of the units increase significantly. Even if it becomes necessary to create a high pressure, use it in short-term modes. In principle, this is all that can be said about how to build a car wash.
