Why you might need to know tire size for hyundai solaris? For example, in order to purchase new tires, choose the right winter tires or buy new wheels for your car.
When buying third-party wheels and tires for your car, it is very important to take into account the technical characteristics, dimensions and parameters of both the wheel and the rubber. For example, if you buy discs of the same radius as the ones installed now, but with a different offset, you will create a load on the hub, which will lead to premature wear. Installing tires with a higher or lower profile will also not have a positive effect on the characteristics of your car and its reliability.
The fact is that the rubber has a higher profile, firstly it is less stable, and secondly, when turning, it can simply cling to the arches. Low profile tires will put stress on all suspension components, which is even worse. Therefore, be careful and always focus on the manufacturer's parameters.
Tire size for Hyundai Solaris
185/65/R15 or 195/55/R16
A reasonable question arises why the tire size is different. Everything is simple here - it depends on the configuration of the car. Namely, what size engine is installed on your car. So for a complete set with a 1.4 liter engine, the tire size for the Hyundai Solaris is 185/65/R15, and on cars with a 1.6 engine — 195/55/R16
Of course, wider rims make driving more predictable. It rolls less in corners and is more resistant to roll at high speed, but ride comfort is also slightly removed due to harder pitting.
Never skimp on alloy wheels. The fact is that often a Chinese disk can simply fall apart when it falls into a small hole. So think about what will happen if you fall into such a hole at a speed of 100-120 km.h?
When choosing wheels and tires, first of all, be guided by the reviews of the owners, which can be easily found on the net.
- Judging by the survey we conducted, a high mileage. namely, how Hyundai Solaris cars carry it, that's what potential buyers of both new and...
- If a couple of years ago, Hyundai Solaris was clearly the leader in the market of inexpensive cars and could really be called the only affordable and beautiful car, then with the advent of KIA ...
- If you are going to purchase a Hyundai Solaris, the price in Makhachkala for it will not be either high or low for you, the fact is that the manufacturer ...
21.10.2017
For owners and buyers of any car, new or not, a number of questions about its maintenance are always relevant. And those that are careful about finding answers to them usually get the bonus of hassle-free ownership, no nasty surprises like unplanned repairs or performance degradation, and money savings. Rubber for the Hyundai Solaris is in demand all year round, especially during seasonal shoe changes. The right choice of wheels will have a positive effect on many characteristics of the machine, such as handling, driving comfort, safety, running gear life, and some others. And, of course, the appearance, where would it be without it - properly selected rims can make Solaris more sporty and interesting, give it a significant amount of individuality.
Hyundai Solaris 2017 with original wheels
Tire and rim size
The main characteristic when choosing wheels for Solaris is the dimension. It consists of several numbers - the sizes of disks and tires. These characteristics may vary. For new cars, usually, wheel sizes vary depending on the modification and configuration. The size of the disk is indicated by two numbers of the form 15 × 5.5, where the first indicates the diameter in inches, and the second the width. Width is also measured in inches and a Latin letter may still be present in its designation, showing the design feature of the edge of the disk side. For most modern passenger cars, this is the letter J. This feature carries little useful information when choosing wheels and is usually of interest to specialists. Most often, rims of the following sizes are put on Solaris:
- 15×5.5J
- 15×6J
- 16×6J
Another important point is the disc offset. It is marked with the letters ET and shows the distance between the plane that is pressed against the hub and the axis of symmetry of the disk. Overhang can be positive, negative or zero. For Hyundai Solaris, the disc offset should remain within 46-52. When choosing wheels, you should always pay attention to this parameter. It is allowed to change it by no more than 5-7 mm, relative to the factory one. Significant deviations in the overhang will adversely affect the vehicle's handling and suspension life. In addition, wheels with an offset that differs from the specified one may simply not fit.
Solaris tire size is another important feature when choosing wheels. It is indicated by a marking of the form 185/65 R15, where the number 185 indicates the width of the tire in millimeters, 65 is the percentage of the profile height to width, the number 15 indicates that such a tire is designed for a 15-inch rim. The letter R indicates that the tire has a radial design, for modern passenger cars, at the moment almost all tires are of this design, therefore it is not an important parameter.
The most common Solaris tire sizes are 185/65 R15 and 195/55 R16. Such tires, depending on the configuration, can be installed on these machines at the factory.
As a tuning, you can install wheels of a larger dimension of the 17th diameter. However, here it is worth paying special attention to both disks and rubber. There are positive examples of installing 17″ rims, 7.5J wide with ET45 offset. Rubber in this case, you can take 215/45. Close to ideal with a narrower 6-7J rim, these wheels barely protrude from the arches and look very harmonious. Difficulties when installing wheels of 17 diameters can create fender liner, which reduces the space in the arches. For them, oversized wheels can cling. Such inconveniences can also occur without fender liner when the steering wheel is completely unscrewed or when large irregularities are driven.
Solaris on 17 rims and low profile tires
When creating this model, Hyundai engineers paid great attention to fuel consumption. In their opinion, this characteristic, for a city car, is more important than a sporty appearance and outstanding handling at high speeds. The wheels of small diameter and small width were not chosen by chance. They have a low weight and low rolling resistance, which has a positive effect on dynamics and economy. Installing wheels with a larger mass will have the opposite effect, to a greater extent this applies to a liter, which does not already suffer from excess power.
Wheel bolt pattern
The bolt pattern of the Hyundai Solaris is another important point when choosing wheels. This parameter is sometimes also called drilling. It consists of two digits of the form X*X and is denoted by the abbreviation PCD in the labeling of discs. Shows the number of bolts on which the wheel is attached and the diameter of the circle on which they are located. Passenger cars typically use four to six studs.
For Solaris, the PCD value is 4 * 100, which means that the wheel is mounted on four bolts located on a circle with a diameter of 100 mm. The wheels of Kia Rio, a classmate from another Korean manufacturer, have the same bolt pattern. The hub hole in the disk has a diameter of 54.1 mm, the thread on the studs is M12 * 1.50. This thread is widespread and is found on many cars. Its value should help when choosing flare nuts for fastening wheels. Hub hole may be larger than specified.
Razboltka Hyundai Solaris 4*100
Since there are few discs with a 4 * 100 bolt pattern with a diameter of more than 16 ″ on sale, sometimes the question arises whether it is possible to change the PCD, for example, to 5 * 114.3, like in Sonata, Tussan and other high school students. Such wheels would look more interesting, and the fifth bolt would obviously not hurt - the mount would be more reliable. But the main thing, of course, is that for such a bolt pattern you can find many options for 16″, 17″ and even 18″ discs. Unfortunately, this is difficult to implement and very expensive, so the activity attracts only real enthusiasts. Most likely it will be necessary to replace the hubs, brake discs, calipers. You also need to pay attention to the fact that the hubs must fit the drive shafts. The bill goes to tens of thousands of rubles, excluding the cost of the wheels themselves, which is quite expensive in the case of Solaris.
Using the automatic selection of tires and wheels for the car Hyundai Solaris, you can avoid many problems related to their compatibility and compliance with the recommendations of car manufacturers. After all, these components have a huge impact on a number of vehicle performance, from handling to dynamic qualities. In addition, tires and rims in a modern car are one of the elements of active safety. That is why the choice between them should be made as responsibly as possible, which implies the presence of a whole range of knowledge about these products.
Unfortunately, or, conversely, fortunately, a significant part of motorists prefer not to study the technical device of their own car thoroughly. Regardless of this, the automatic selection system will be extremely useful, that is, it will minimize the likelihood of making the wrong decision when choosing certain tires and rims. And it is very wide, which is due to the diversity of the range of such products presented in the Mosavtoshina online store.
Knowing the tire size on a Hyundai Solaris car is very important. The level of comfort while driving will depend on how correctly you make a choice. But not comfort alone! Also, don't forget about safety. This article will tell you how to choose the right tires for the Hyundai Solaris.
Right choice
We will talk about various modifications of Hyundai, so that each owner receives a dose of useful information. It's worth starting with the choice of tires for Solaris 2010 release, modification - Gamma. If we are talking about a car with a 1.4 liter engine, then there are two options: 185/65 R15 and 195/55 R16. In the case of the first option, the disk sizes are as follows: 6.0 by 15 and 5.5 by 15. For the second option: 6.0 by 16. For a car with a 1.6 engine, the tire parameters will be similar.
The next car is Solaris 2011. There are also two configurations - Gamma 1.4 and Gamma 1.6. For a machine with a smaller engine volume, it is recommended to take 185/65 R15 or 195/55 R16. For 1.6 l - 185/65 R15 and 195/55 R16.
There is a certain trend - regardless of the year of manufacture, the size of tires does not change on cars.
It is also worth noting that for models manufactured in 2012 - 2017, the wheel parameters remain unchanged.
Is it possible to install other wheels
In general, the installation of wheels with a different dimension can be performed. But it is not recommended that it be winter tires. The fact is that in winter the roads are often covered with ice, and therefore the movement becomes extremely dangerous. To reduce the risk of getting into a traffic accident, it is best to wear exactly what the manufacturer recommended on the disc. In this case, you should not worry about your own safety, as well as those people who are in the cabin of the iron horse.
When it comes to summer tires, it is also worth following the manufacturer's recommendations, but still, if you put a completely different option with the most similar parameters, nothing bad should happen.
Be that as it may, remember that installing the right wheels on your Hyundai Solaris is one of the main elements of traffic safety. The choice should be taken as responsibly as possible. There are a lot of different tables on the Internet, where it is exactly written what is best for your Solaris. Good luck choosing!
Every driver faces the problem of choosing tires. Specifically, Solaris is a stable car that involves different driving styles. A correctly selected type of tire will become an effective assistant on the way: where you need to stop, where necessary - direct.
Rubber on Solaris
The dimensions that tires on Solaris should have can correspond to either the formula 185/65R15, or 195/55R16, from which it follows that the minimum width of such tires is 185 mm, and the maximum is 195 mm, while in the first case the ratio of the height of the tire to its width will be 65%, the diameter of the landing rim is 15 inches, and in the second - 55% and 16 inches respectively.
Before choosing tires of the appropriate size, you can buy wheels Replica as close to analog and suitable for this model.
Winter tires on Solaris
depending from tire size, load index and speed, you can choose the right model of winter tires for Hyundai Solaris.
- BF Goodrich G-Force Stud Go
- Bridgestone Blizzak Revo GZ
- Sava Eskimo Stud H-Stud MS
- Dunlop SP Winter Ice 01
- Bridgestone Blizzak Spike-01
- Michelin Alpin A4
- Dunlop Ice Touch
- and etc.
The maximum permissible load on these tires, depending on their dimension, can be either 560 kg (88) or 630 kg (92), or 545 kg (87) or 615 kg (91). The speed at the same time, which is permissible under a particular load, can be either 160 km / h (Q) or 180 km / h (S), but no more than 190 km/h(T). In addition, the declared models of Yokohama, Michelin, Nokian can withstand the maximum load at the maximum speed index for winter tires.
By the way, fellow countrymen Hyundai are Korean Kumho tires- also show a good result, withstanding up to 615 kg at speed 190 km/h. It should also be noted that in winter, tires with a width of 195 mm manifest themselves less stable, therefore, their indicators of compliance of the load index with the speed index are somewhat worse. Both indexes are indicated along the perimeter of the tire, following the diameter of the rim.
Summer tires on Solaris
Summer tires for Hyundai Solaris have the same dimensions and load index, except for the speed index. Permissible weight load on a tire at 185mm width, 65% height and 15" seat rim diameter that it will support at speed from 190 km/h to 210 km/h, is 560 kg-630 kg, and tires with the formula 195 / 55R16 - for example, Tigar Syneris tires, with a maximum allowable acceleration of up to 240 km / h, can withstand no more than 545 kg.
Watch an interesting video on this topic:
