Fog lights have long been used to improve visibility on the road. They justify themselves not only in fog, but also in winter during a snowstorm or at night on a bad road. Everyone had to see the yellow light of foglights, but recently, thanks to the power of the lamps, the luminous flux has changed. It remains to consider the question of how to install such light sources on a Gazelle commercial vehicle.
PTF can also be installed on the bumper
It is also important to ensure an autonomous connection of fog lights to the Gazelle. This is due not only to the increased power of the lamp, but also to the generated current. Experts do not advise using the parallel connection of dimensions and foglights - the wires just aren't designed for it..
Most Gazelles do not usually have fog lights installed. Because of this, you have to do such work with your own hands. The simplest connection combination involves using the main light switch so as not to look for additional keys. Such a scheme for connecting fog lights to a Gazelle is often used on other brands of domestic cars.
Scheme for connecting external lighting devices to the GAZelle
You need to start by choosing a place where our new foglights will stand. Traditionally, either a car bumper or a cabin roof is used for these purposes. However, with the second option, there may be difficulties in coordinating with the rules of the road.
Note! According to these regulations, it is allowed to use the roof for vehicles with all-wheel drive or in severe operating conditions - dirt roads, bumps, etc.
Additionally, you need to know other requirements of the traffic police rules.
So, the installation of Gazelle fog lights must meet the following standards:
- the light flux should not be greater than from the main light source of the car;
- headlights must be installed so that they are parallel to the axis of symmetry of the machine;
- the height must be at least 25 cm, and fog lights cannot protrude from the side of the vehicle by more than 40 cm.
Bumper Mount Kit
Of the other nuances that the installation of fog lights on a Gazelle can cause, you should pay attention to the shape of the products, since they can be rectangular, square, oval, etc. Put them in the places recommended by the manufacturer.
If this does not work, then you can cut holes in the existing bumper or buy a new one specially prepared for this. The price of buying a new bumper may not be acceptable for every owner of a Gazelle, so we will dwell on how to do this without extra costs.
Here is an example connection instruction:
- First of all, in the symmetrical places of the bumper, we cut out two holes in which the light sources will be attached and thoroughly lubricate them with an anti-corrosion agent.
- We connect the purchased pair of foglights with wires. Check the cross section of the main wiring of the car and the one that comes with the headlights. It is generally accepted that the minimum cross-sectional diameter should be at least 0.75 mm.
- We de-energize the car battery.
- We carry out wiring in accordance with the scheme that comes with the package.
Deciphering the connectors for connecting headlights to the Gazelle
- It is necessary to open the case of each headlight and pull out its optical element from there. This will be required so that you can carefully insert the halogen bulb and not damage the body with glass during installation.
- Having twisted the headlight housings, we put the contact relay with the wiring down. So we protect it from moisture.
- When you insert a halogen lamp into its optical element, do not allow your fingers to come into contact with the surface of the bulb. Work with gloves or even wrap the flask with a rag. The ingress of grease on the surface of the bulb will significantly reduce the life of the light bulb.
- We connect the wiring kit to the lamp and put the optical element.
- Gazelle fog lights will be considered installed when you have completed all the stages of work and provided power to the battery again. Now you can check the health of the device. Turn on the headlight only after the completion of the complete assembly. The video in this article will provide an opportunity to visually see some of the work.
If the fog light kit you purchased does not have a relay, purchase one as for model 3302. There, it powers the rear fog lights. Normally, each kit should be equipped with electrical wiring with connectors, a breaker-relay, a power button and a detailed diagram-instruction for the assembly steps.
Pay close attention to the quality of the wiring
Note! The wiring harness is not only possible, but also necessary to be brought out into the space under the hood.
After that, decide on the place where the relay-breaker will be attached:
- The wiring from the relay will be led into the passenger compartment through a specially provided technological hole.
- It is now necessary to find out where the button that turns on the fog light will be located in order to find out how to connect it to the Gazelle's standard electrical wiring.
- We will need the relay for the reason that to save the button - it may not withstand the current that is consumed by the foglights. Some are used to connect a 3-position key: 1 wire is extended to the dimensions circuit, 2nd to the ignition, and 3rd to the relay itself. This achieves 3 modes of operation.
Light control unit for Gazelle
Let's briefly consider the main reasons for the failure of foglights or problems in the operation of control mechanisms (see photo). Unfortunately, long operation and not always favorable climate cause corrosion and oxidation of wires and contacts.
- Each of the foglights has its own fuse located in the block under the hood. Check first to see if it's broken. If both headlights do not work at once, then the matter is different, since the fuses do not fail in pairs.
- In the event of a burnout of the lamps, nothing else can be done except to replace them, and the reason may be in the breaker relay. There should be a click when the headlights are turned on. If not, then either it is not working, or there is no power on it, or, as an option, there is no normal mass on the body, or from a relay.
We hope that the proposed material will be useful to you. Do not forget to also protect the headlight glass from foreign objects - for this purpose, the production of stickers on the headlights is provided. Good luck on the road!
Each car has its own use, largely dependent on the owner. But if the conversation turns to the Gazelle, then almost always we are talking about commercial transportation.
Moreover, the routes often end far from the illuminated city streets.
Installing fog lights - Gazelle gets more luminous flux
Therefore, the issue of improving roadway lighting is more relevant than ever:
- After all, regular headlights are not enough to maneuver in cramped yards for loading and unloading;
- And if we take into account the weather conditions, then the installation of fog lights on the Gazelle is a conscious necessity, designed to secure the movement of the vehicle in conditions of poor visibility.
Since the Rules of the Road must be strictly observed, the only correct place to install fog lights can be the front bumper of the car.
Note!
Traffic rules prescribe restrictions on the location of additional lighting devices on a car.
In particular, Gazelle fog lights should not be located above the dipped and main beam headlights.
Also, they should not protrude more than 400 mm beyond the external dimensions, and the distance from the road surface to the headlights should be at least 25 cm.
The rules of the road and GOST 8769-75 allow the installation of fog lights and additional headlights on the roof, provided that the vehicle is operated in difficult road conditions:
- On gravel roads where there is a high risk of damage to headlights (quarries, road construction, etc.);
- Off-road;
- On all-wheel drive vehicles participating in sports competitions.
Tip: if you don’t want to explain yourself at every traffic police post regarding the “chandelier” on the cab, motivating your decision with concern for the safety of the headlights, then install foglights only on the front bumper.
And the manufacture of stickers on the headlights from a special polymer film will protect the glass from gravel pebbles.
Mounting process
To install the kit yourself, you can:
- Use the places indicated by the manufacturer in the front bumper;
- Choose the mounting location on the bumper yourself (taking into account the requirements of traffic rules).
The fact is that the shape of the foglights is different both in size and in shape. Therefore, the connection of fog lights to the Gazelle will be carried out by you based on the dimensions of the selected lighting devices.
Today on sale you can find products:
- Rectangular;
- Square shape;
- Oval shape.
And the question after buying a vending kit is how to install lighting fixtures in places not intended for them. The thing is that companies tend to produce universal lighting fixtures, while there is no single standard among automotive manufacturers.
Mounting methods on the bumper
The difficulty lies in the fact that the standard front bumper does not have slots for installing additional lighting fixtures.
Therefore, Gazelle owners have two options:
- Cut them out yourself, or install foglights on top of the bumper;
- Buy an upgraded bumper.
Advice! If the second option seems too expensive for you, since price is a decisive factor, then it remains possible to install fog lights directly on the bumper using homemade fasteners.
Integration into the electrical circuit
Having dealt with the attachment point, you have to connect the electrical components into a single circuit and integrate it into the standard one.
To do this, complete with foglights is:
- Relay-breaker;
- Power button designed for installation on the instrument panel;
- Instructions for connecting and pinout terminals.
The work algorithm will be as follows:
- We connect the installed headlights with wires;
- We display the wiring harness in the engine compartment;
- We determine the installation location of the relay;
Advice!
If there is no relay in the kit, then purchase it from Gazelle 3302 - she has such a relay responsible for the operation of the rear foglights.
- We connect the wires to the relay from the headlights;
- We start from the relay through the technological hole of the wire to the salon;
- Determine the location of the power button;
- We install it and connect it to the standard one.
Let's figure out how to connect the wires to the relay. The fact is that the relay itself is required to protect the power button, since it is not designed for the current that powerful fog lights consume.
Having assembled the entire circuit together, check the correct connection of the wires to the relay installed under the hood:
- Contact 86 - relay winding circuit;
- Contact 87 - to the "plus" through the button;
- Conclusion 30 - to the "plus" through the fuse;
- Contact 85 - ground ("minus").
Finally
We hope that we have covered in sufficient detail the process of installing and installing foglights on cars of the Gazelle family (see also the article). And guided by our advice, you will avoid mistakes and unnecessary spending. In the presented video in this article you will find additional information on this topic.
Fog lights on the Gazelle - practical installation nuances
Fog lights have long been used to improve visibility on the road. They justify themselves not only in fog, but also in winter during a snowstorm or at night on a bad road. Everyone had to see the yellow light of foglights, but recently, thanks to the power of the lamps, the luminous flux has changed. It remains to consider the question of how to install such light sources on a Gazelle commercial vehicle.
PTF can also be installed on the bumper
The usefulness of foglights
It is also important to ensure an autonomous connection of fog lights to the Gazelle. This is due not only to the increased power of the lamp, but also to the generated current. Experts do not advise using the parallel connection of dimensions and foglights - the wires just aren't designed for it. .
Most Gazelles do not usually have fog lights installed. Because of this, you have to do such work with your own hands. The simplest connection combination involves using the main light switch so as not to look for additional keys. Such a scheme for connecting fog lights to a Gazelle is often used on other brands of domestic cars.
Scheme for connecting external lighting devices to the GAZelle
Where to post
You need to start by choosing a place where our new foglights will stand. Traditionally, either a car bumper or a cabin roof is used for these purposes. However, with the second option, there may be difficulties in coordinating with the rules of the road.
Note! According to these regulations, it is allowed to use the roof for vehicles with all-wheel drive or in severe operating conditions - dirt roads, bumps, etc.
Additionally, you need to know other requirements of the traffic police rules.
So, the installation of Gazelle fog lights must meet the following standards:
- the light flux should not be greater than from the main light source of the car;
- headlights must be installed so that they are parallel to the axis of symmetry of the machine;
- the height must be at least 25 cm, and fog lights cannot protrude from the side of the vehicle by more than 40 cm.
Bumper Mount Kit
Of the other nuances that the installation of fog lights on a Gazelle can cause, you should pay attention to the shape of the products, since they can be rectangular, square, oval, etc. Put them in the places recommended by the manufacturer.
If this does not work, then you can cut holes in the existing bumper or buy a new one specially prepared for this. The price of buying a new bumper may not be acceptable for every owner of a Gazelle, so we will dwell on how to do this without extra costs.
The main stages of the connection work
Here is an example connection instruction:
- First of all, in the symmetrical places of the bumper, we cut out two holes in which the light sources will be attached and thoroughly lubricate them with an anti-corrosion agent.
- We connect the purchased pair of foglights with wires. Check the cross section of the main wiring of the car and the one that comes with the headlights. It is generally accepted that the minimum cross-sectional diameter should be at least 0.75 mm.
- We de-energize the car battery.
- We carry out wiring in accordance with the scheme that comes with the package.
Deciphering the connectors for connecting headlights to the Gazelle
- It is necessary to open the case of each headlight and pull out its optical element from there. This will be required so that you can carefully insert the halogen bulb and not damage the body with glass during installation.
- Having twisted the headlight housings, we put the contact relay with the wiring down. So we protect it from moisture.
- When you insert a halogen lamp into its optical element, do not allow your fingers to come into contact with the surface of the bulb. Work with gloves or even wrap the flask with a rag. The ingress of grease on the surface of the bulb will significantly reduce the life of the light bulb.
- We connect the wiring kit to the lamp and put the optical element.
- Gazelle fog lights will be considered installed when you have completed all the stages of work and provided power to the battery again. Now you can check the health of the device. Turn on the headlight only after the completion of the complete assembly. in this article will provide an opportunity to visually see some of the work.
The role of the relay and button
If the fog light kit you purchased does not have a relay, purchase one as for model 3302. There, it powers the rear fog lights. Normally, each kit should be equipped with electrical wiring with connectors, a breaker-relay, a power button and a detailed diagram-instruction for the assembly steps.
Pay close attention to the quality of the wiring
Note! The wiring harness is not only possible, but also necessary to be brought out into the space under the hood.
After that, decide on the place where the relay-breaker will be attached:
- The wiring from the relay will be led into the passenger compartment through a specially provided technological hole.
- It is now necessary to find out where the button that turns on the fog light will be located in order to find out how to connect it to the Gazelle's standard electrical wiring.
- We will need the relay for the reason that to save the button - it may not withstand the current that is consumed by the foglights. Some are used to connect a 3-position key: 1 wire is extended to the dimensions circuit, 2nd to the ignition, and 3rd to the relay itself. This achieves 3 modes of operation.
Light control unit for Gazelle
If the PTFs are not working
Let's briefly consider the main reasons for the failure of foglights or problems in the operation of control mechanisms (see photo). Unfortunately, long operation and not always favorable climate cause corrosion and oxidation of wires and contacts.
- Each of the foglights has its own fuse located in the block under the hood. Check first to see if it's broken. If both headlights do not work at once, then the matter is different, since the fuses do not fail in pairs.
- In the event of a burnout of the lamps, nothing else can be done except to replace them, and the reason may be in the breaker relay. There should be a click when the headlights are turned on. If not, then either it is not working, or there is no power on it, or, as an option, there is no normal mass on the body, or from a relay.
In conclusion
We hope that the proposed material will be useful to you. Do not forget to also protect the headlight glass from foreign objects - for this purpose, the production of stickers on the headlights is provided. Good luck on the road!
http://sam-avtoelektrik.ru
They are installed on the Gazelle not for beauty, but from the need to improve visibility on the road during fog or rain and snow. However, some models are not supplied with them by the manufacturer. About how to choose, install and connect the headlights yourself, and will be discussed below.
About fog lights
Ordinary headlights in fog, rain, heavy snowfall are of little use: the space in front of the car is not visible from them, it is limited by a whitish veil, especially in long-range mode. This happens due to the reflection of light from drops of fog, rain, snowflakes.
In such a situation, an indispensable assistant is the unit, the installation of which on any car will evenly illuminate the road and avoid dangerous situations.
But it is important not to forget that strife, and knowing something about it will not hurt any driver.
Russian fog lights produced at the Bosch-Ryazan and Avtosvet enterprises have good characteristics. Quite a budget cost is another plus of such products.
Headlights from Asian firms Al Khateeb and Saca are more attractive in their appearance, but their cost is twice as high as Russian ones, and high power often leads to overheating and deformation of plastic parts.
The devices of the German company Hella are considered the highest quality fog optics, but this pleasure is not available to every driver because of the cost.
When buying, first of all, pay attention to the appearance of the headlight (set): “foglights” have a marker in the form of the letter “B”. Next, the tightness between the diffuser and the reflector (housing) is checked. Violation of the tightness of this connection will reduce the life of the headlight.
Types of "fog"
According to the form of execution, the fog lights for the Gazelle are divided into rectangular, square and oval, but the shape of the body does not play a special role and does not give any special advantages to one over the other.
"Foglights" may differ in optical schemes. Thanks to the use of different options, the issue of the optimal ratio of the maximum luminous flux and the minimum power consumed to ensure it is solved to varying degrees.
The most widely used headlights have a parabolic reflector. With this scheme, the place of installation of the light bulb is combined with the focal point, which allows you to form in the form of a horizontal strip. A special screen limits its upward spread. Headlight efficiency is 27%.
Higher efficiency (up to 45%) have fog lights with a free-form reflector. The design allows the use of a significant amount of light, providing a maximum area of its distribution. However, headlights with this optical scheme are expensive and have not yet been widely used.
Selecting the location of the headlights
An important point in the configuration of any car is the Gazelle in this matter is no exception, taking into account the commercial all-weather nature of its operation.
There are two options for installing headlights on the Gazelle: on the bumper and on the roof. The first one is traditionally used.
The second option is poorly consistent with the rules of the road, since this document establishes restrictions on the placement of lighting equipment not provided by the factory on a car. Installation of headlights on the roof is allowed only if the vehicle is operated in difficult conditions: gravel road surface, off-road.
The first option also has limitations: you can install fog lights on the Gazelle no higher than the level of conventional headlights, while the dimensions of the car are not violated by more than 400 mm, and the distance from the headlights to the road surface should not be less than 250 mm.
Installation regulations
Fog lights on the "Gazelle" are installed with the obligatory consideration of the power of their flow. It is forbidden to use PTF if this indicator exceeds the power of the main light sources.
Headlights must be installed symmetrically with respect to the axis of the vehicle.
If the factory has already provided and marked on the bumper the installation locations for foglights, then you should follow the factory recommendations and install the headlights in these areas.
After fixing the PTF, the correctness of their adjustment must be checked. It is advisable to have this done at a workshop by a qualified electrician. This step is perhaps the most important of the previous ones, since the quality of the fog lights depends on it. Only then will they be useful equipment.
Connecting "fog"
After the fog lights on the Gazelle are installed, it is required to connect them to the on-board electrical network. This work requires certain knowledge, otherwise, not only electrical, but also fire safety standards may be violated. To correctly complete this step, you will need a wiring diagram for fog lights (“Gazelle” must be equipped with an on-board network diagram).
First of all, you should check the proportionality of the cross-sections of the wires of the on-board network and the wires from the headlights. A minimum cross section of up to 0.75 mm is allowed. If you use wires of a smaller cross section, then they will overheat, and then ignite.
It is mandatory to disconnect the onboard battery. Such a measure is necessary in case of erroneous connection of the PTF and a short circuit in the circuit.
If the set of headlights does not provide a relay for turning them on, you should purchase and install it, since a regular button may not ensure the normal operation of the PTF due to the high current of their supply and burning of its contacts.
PTF power is supplied only through dedicated fuses, otherwise a malfunction of the headlights and their wiring will turn off the entire Gazelle on-board electrical network.
Adjustment
When the installation of the fog lights is completed, the Gazelle is driven onto a horizontal platform to adjust them. For the quality of this work, you should:
- bring the pressure in the wheels to normal;
- fill the fuel tank completely;
- load the car to its normal state;
- on a vertical screen (located 10 m from the car) a vertical line (the axis of the car) and two parallel lines are marked (the top one is the distance from the center of the headlights to the surface of the site, the bottom one is 100 mm).
Each headlight is adjusted separately according to the lines marked on the screen.
PTF for "Gazelle" series "Business" and "Next"
The problem of safe driving in difficult weather conditions gives rise to the following question: "Which fog lights ("Gazelle-Business" is your car) to buy, is it possible to install PTFs designed for other cars?"
The difficulty lies in mounting the headlights specifically for this car. A mistake in choosing can be costly for the owner of Gazelle-Business. According to most drivers and car service specialists, the Lada-Priora foglights may be the best option, although the mount will still have to be finalized: an adapter is required.
The fog lights installed on the Gazelle-Next will not create problems for the driver, similar to those found in the Gazelle-Business.
This model is completed with antifog agents by the manufacturer.
To bet or not to bet? Drivers' opinion
Judging by the reviews, drivers unanimously welcome the installation of "foglights". The only question is which headlights to put on the Gazelle. The automotive industry has only now “grown up” to their installation, and the first models were deprived of this. Therefore, drivers most often address this problem in specialized forums.
Also, drivers believe that it is better to use yellow "foglights", while you should not skimp on good PTFs.
