Motoblock Kipor - amazing versatility due to attachments. Motoblocks KIPOR

The technique of the Kipor brand among its competitors is distinguished by many positive aspects (we are talking specifically about Chinese mini-techniques). Its quality is at a truly European level. For example, the bolt strength class here is 8.8. Kipor walk-behind tractor - just from this category. They have a great design.

Why are Kipor walk-behind tractors so good?

The Kipor engine has a large air filter, as well as an oil bath, which allow the walk-behind tractor to operate smoothly in conditions of high dust content in the air. As a result, its service life is seriously increased, provided that the oil is changed in a timely manner.

The steering wheel turns one hundred and eighty degrees. Separately, it should be noted the system of working bodies of the walk-behind tractor, which are fixed not only behind, but also in front. All this greatly improves the functionality of the device. Such walk-behind tractors are called integral.

Kipor motoblocks are representatives of serious Chinese agricultural equipment, which are made soundly, and because of this they are loved by consumers in the Russian market. Noteworthy details:

• welds;
• high quality rough surfaces;
• casting;
• stamping;
• bending of sheet-type parts;
• assembly accuracy.

For example, diesel engines that are used for the Chinese brand are sold in Western Europe. Chinese diesel engines have an approximately fifteen-year history of operation on Russian lands. During their use on our mini-tractors, they showed many times higher stability and reliability than those made in Russia.

Advantages of the running model

Motoblock KDT-610L, for example, has hexagonal shafts. The Chinese model has another solid trump card - special axle shafts are placed on its shafts, thanks to which the track width for the wheels can be changed.

Using universal axle shafts, the wheels can be put on a narrow track or on a very wide track, in a word, the issue of getting the wheels into the track will not arise. You can easily fit both wheels into the aisles without damaging the rows of seedlings themselves. You can put the wheels so that they fall into two adjacent aisles and so on. The solution is simple, but it saves a lot of nerves when processing a variety of horticultural and horticultural crops. Attachments, as a result, follow the exact direction of the walk-behind tractor.

What's under the hood?

If you look under the casing of the KDT-610L, you will appreciate the advantages of the drive. The Chinese installed three-strand pulleys and equipped the walk-behind tractor with three belts, in contrast to kinematic walk-behind tractors. As a result, the user is guaranteed the durability of the entire structure.

The Kipor walk-behind tractor has one more difference: it is equipped with a splined power take-off shaft, and not a pulley, like other devices. All controls are concentrated right at your fingertips, including gear shifting, gas, clutch.

What's in the load?

All working bodies have a rather successful original design, including the hiller, milling cutters, vibrating diggers, wheels with lugs. If you remove the wheels from the walk-behind tractor, you can put a rotator cutter. This is a set of small hoes that dig up the soil, not just cut it.

Kipor walk-behind tractors are able to greatly facilitate your work on the plot, so that you spend a minimum of effort with maximum comfort. If you are looking for a variety of spare parts for walk-behind tractors, such as a rotary mower for a walk-behind tractor, then on our website you will find all the information you need.

Kipor Chinese diesel motoblocks have long become popular due to the regular modernization of agricultural machinery.

You can accurately identify the Kipor walk-behind tractor by the following characteristics:

• durable cast body;
• excellent quality of soil treatment;
• the presence of welding seams;
• special stamping;
• interesting design;
• well-assembled durable parts.

To evaluate the features of this technique, it is worth watching the proposed video.

The Kipor KGT 510 walk-behind tractor is perfect for performing a variety of tasks, because after installing an additional hitch, you can not only engage in land work, but also transport goods, as well as clear the area of ​​snow and leaves. It is easy to use, compact, reliable and has the following features:

• powerful four-stroke engine with a power of 5.5 liters. With.;
• small dimensions - 1550 * 600 * 1020 mm, unit weight - 80 kg;
• the shaft rotates at a standard speed of 700 rpm;
• when moving forward, the speed of the unit is within 0.8 - 9.8 km / h, backward - 1 - 1.6 km / h;
• adjustable furrow width within 190 - 580 mm;
• manual start;
• adjustable handle for the height of the operator.

The unit is manoeuvrable and easy to use. Among the advantages of the KGT 510 model, it is worth noting the low noise level, soft clutch, economical diesel consumption, and ease of control.

The improved model Kipor KDT 610 E has the following technical features:

• single-cylinder four-stroke engine with GF 178 FE, equipped with an air cooler to achieve a power of 5 liters. With.;
• the width of the cultivated soil is 40-110 centimeters, the depth of penetration of the cutters is 15-30 centimeters;
• six forward speeds and two reverse;
• with attachments, the walk-behind tractor moves at a speed of 10 km / h;
• a tank of 3.5 liters at a flow rate of half a liter of diesel per hour;
• weight of equipment - 123 kg;
• belt clutch and the presence of a chain-type gearbox.

The walk-behind tractor is quickly started manually with a key. Maximum power is achieved by mechanical decompressors. If it is necessary to fill in oil, the walk-behind tractor turns off by itself. In the presence of the Oil-Guard system, breakdowns of the walk-behind tractor are practically excluded. The enlarged muffler makes the walk-behind tractor even quieter.

The advantages of this model:

• affordable cost;
• reliable equipment;
• battery on automatic charging;
• easy control system;
• the ability to adjust the distance between the wheels;
• convenient operating characteristics;
• low fuel consumption;
• protected cutters.

Motoblock Kipor KDT910E is a popular technique for the mechanization of agricultural work. The model differs in compactness and high level of power, characteristic features for a reliable cultivator.

Thanks to its high functionality, fast and high-quality soil processing is ensured. Unique characteristics allow the unit to be used on large areas. It does not require special management skills.

The walk-behind tractor is maneuverable due to the presence of a mechanical transmission. The cultivator can handle rocky soil, dried soil and even clay.

Specifications:

• single-cylinder, four-stroke, 9.5 hp OHV diesel engine. With.;
• manual start system;
• 5 liter gas tank with economical fuel consumption;
• six forward speeds with a maximum of 10.7 km/h and two reverse speeds with a maximum of 2 km/h;
• gear reducer;
• oil level sensor;
• air-cooled for continuous use without the risk of overheating;
• weight - 104 kg.

The diesel unit operates almost silently, and the amount of harmful emissions into the atmosphere is reduced as much as possible. The device consumes fuel very economically, because about 1 liter "leaves" per hour of active operation. The presence of 8 speeds - 6 forward and 2 reverse - is also pleasing, which contributes to better maneuverability and comfort during operation.

Specifications:

• Engine - single-cylinder, 4-stroke;
• The location of the valves - the top;
• Weight - 110 kg.

The Kipor walk-behind tractor can be used together with various attachments that turn the equipment into a “universal soldier”. Experts recommend using SAE 10W30 oil.

For a more detailed and productive acquaintance with the features of the model, you should get acquainted with informative videos submitted by real users.

The specified walk-behind tractor Kipor is one of the most popular. The model has a built-in automatic protection system for extremely low oil levels. Design features also contribute to very economical diesel consumption.


Specifications:

• The number of engine revolutions per minute - 1800;
• Fuel tank capacity - 3.5 l;
• Oil sump capacity - 1.1 l;
• Engine brand - 178F;
• Weight - 110 kg.

The technique has 5.5 liters. With. and 6 gears, and the unit is started manually. The main advantage of the specified Kipor walk-behind tractor is the resistance of the mechanism to work in any conditions. Moreover, even the repair of the model is carried out very quickly, because the design is quite simple and does not require special knowledge and skills.

Kipor is a productive and affordable technique that is used to perform tasks of varying complexity that do not require frequent repairs. The unit will definitely not stand idle because of its versatility and the ability to attach attachments.

The KIPOR company offers the buyer to choose one of the many items of equipment for servicing land plots of various sizes and complexity. It is an indispensable device for carrying out work on cultivation, sowing. It is possible to use a large set of auxiliary attachments.

This apparatus may include a mass of outboard equipment

Description

Today, KIPOR walk-behind tractors are much less known than other developments sold on the domestic market. It is this development that has successfully established itself, opening up a lot of new opportunities for potential users. On the part of the company, the production of generators, KAMA brand engines, special motor pumps has been launched.

All equipment complies with all the requirements and conditions of the ISO 9001 standard. The KIPOR diesel walk-behind tractor has different capacities (within 3.8-9 horsepower), which will help consumers make their own choice based on the needs of their backyard, farm. It is necessary to take into account the size of the plot, as well as the specifics of the cultivated land.

Description of the Kipor range

The devices are represented by models based on both diesel and gasoline engines. This is indicated by their marking KGT (gasoline models), KDT (diesel models). Remarkably, walk-behind tractors, regardless of the model, are equipped with sets of intelligent shutdown systems.

In this video you will learn the pros and cons of this walk-behind tractor:

This will eliminate the occurrence of failures in the event of a sharp drop in the oil level, as well as control over fuel consumption. Separately, you can display equipment modifications:

• C - devices are equipped with gears, including 3 front, 1 rear;
• E - 6 forward gears, of which 2 are reverse;
• L - 6 forward gears, 2 reverse gears, additionally there is a set of electric starter and headlights.

Gasoline walk-behind tractors Kipor: characteristics and features

Gasoline walk-behind tractor KIPOR KGT510c

It belongs to the middle class models, relevant for working in relatively small areas. The engine power is 5.5 horsepower, the device does an excellent job of cultivating, plowing the field, and other work. The start is carried out in manual mode.

This model is middle class

Motoblock KIPOR KGT510l

Equipped with a powerful motor with manual start. The transmission has 8 shifts (6 forward and 2 rear). The weight of the unit is 82 kilograms, the control is located on the handles.

KIPOR diesel walk-behind tractors: characteristics and features

Motoblock KIPOR KDT 410c

It belongs to the category of small walk-behind tractors, placed in a diesel series, its power is within 3.8 horsepower. The KIPOR 410 walk-behind tractor is equipped with a gearbox with three forward speeds and one rear, accelerates to 9.6 kilometers per hour.

Motoblock KIPOR KDT 410l

Differs in improved characteristics, belongs to the number of units of the middle class. It weighs 91 kilograms, has six forward speeds, a 3.8 horsepower engine.

Motoblock KIPOR KDT 610c

It belongs to the number of semi-professional models, the power is set at 5.5 horsepower. Weight is 100 kilograms, copes with the processing of dense and medium-density soil.

Motoblock model KIPOR KDT 610e

It is an improved version of the 610c model. It features a large number of speeds (two rear speeds have also been added), equipped with an additional electric starter, which allows the operator to start the unit with a half turn. The KIPOR 610e motor-block differs in low noise level.

Motoblock KIPOR KGT 610l

The unit is distinguished by a manual start type, providing full-fledged work on soil up to one hectare, regardless of complexity. You can adjust such indicators as the width of plowing, the installation of an auxiliary set of attachments is provided. Users note a low noise level, reliability and durability of the structure, low fuel consumption.

Motoblock KIPOR KDT 910s

It is one of the models of the professional line, the purpose of which is to serve large areas of space, complex soil. Engine power - 8.5 horsepower, equipment is equipped with a fuel consumption control system. Due to this, the consumption will be low, but there is an increased weight of 121 kilograms.

This model is above average.

Motoblock model KIPOR KDT 910e

It is one of the most powerful and large machines in this professional class. Its weight is about 140 kilograms, for this reason there is no need to purchase additional sets of weights. The power of the KIPOR KDT 910e device is 8.5 horsepower, a plot with an area of ​​​​up to 1 hectare is being worked out.

Motoblock KIPOR KDT 910l

The device is the smallest unit among professional walk-behind tractors. Its weight is within 118 kilograms, while the power of the device is allocated within 8.5 horsepower. Its high suitability for various farm lands, for work in parks and gardens is noted. It is noted for the simplicity and reliability of the manual type of control, it has 4 forward and 2 reverse speeds.

Types of attachments

All walk-behind tractors can be simply and rationally aggregated with numerous attachment options, regardless of whether they are produced by their own brand or by other manufacturers. Small-powered devices are designed in the future to perform any type of agricultural operation.

If we talk about the models of the 910 series, you can perfectly perform business operations with their help. For example, an active tiller can be installed, which will allow for a working width of 90 centimeters. If, instead of wheels, a passive cutter is installed, the working width is set to 120 centimeters.

This distinguishes the product from other manufacturers. The following equipment can be installed:

1. Cutters, regardless of configuration.
2. Rotary mowers and hillers, numerous plows.
3. Potato diggers and potato planters deserve special attention.
4. A special shovel blade, as well as a set of lugs, hitches and much more.
5. An adapter, as well as a motor pump, a mini-cart, and much more.

What are the features of operation and maintenance

It features a relatively simple maintenance procedure. The units are unpretentious during operation, if a breakdown occurs, a malfunction, it is easy to fix it. With strict observance of the rules specified in the instructions, compliance with the schedule for preventive maintenance, it is possible to ensure uninterrupted and reliable operation of the entire walk-behind tractor for a sufficiently long period of time.

Before operating, please read the factory manual. It contains detailed information regarding the operation of special equipment, a set of attachments. The instruction contains a separate block of information, which establishes the correct methods of equipment conservation for the winter period. This consists in setting the compression lever to a specific position, it is additionally necessary to close the intake valve, eliminating the release of air flows.

For this walk-behind tractor there is, for example, a mounted plow

Service

The equipment works on both diesel and gasoline engines. To ensure them, AI-92 gasoline is used. It is recommended by the manufacturer to use SAE30 special engine oil in spring and summer, while SAE10W30 is recommended for use in winter and autumn. An oil change is carried out after every 100 hours of operation - this is a prerequisite.

TAP-15 and TAP-17 are used as transmission oil. The replacement is carried out after 50 hours, in the future the process is carried out after 200 hours. Cleaning the fuel tank is recommended after 50 hours, and replacement takes place at least after 1000 hours. It is necessary to periodically lubricate all components, for which the composition of universal waterproof lubricants is used.

First run and run-in

As a procedure, running in a new walk-behind tractor begins with checking the condition of the oil level in the engine of the device, followed by filling the tank with fuel. To ensure operation in a gentle mode, when putting the machine into operation, it is necessary to let the walk-behind tractor run for at least ten minutes at idle. At the end of this process, the operation of the entire set of components and assemblies is tested at reduced capacities.

This process begins with 1/3 of the power, and then gradually increase the speed. The manufacturing accuracy of the units is high, the walk-behind tractor will not need to carry out a lengthy running-in process. The procedure can then be considered fully completed when the engine has already been running at an average load for at least five hours.

Major faults and repairs

As practice shows, users do not have complaints about the operation of the equipment. On the part of technology, development takes place, which will inevitably lead to the emergence of certain difficulties. Typical faults include:

1. Lack of response from the engine when turned on - an incorrect start is observed, and insufficient compression may occur. The problem may also be hidden in a blown fuse, fuel is not injected into the system.
2. Insufficient engine power - a small amount of oil, as an option, the air filter may be clogged. Alternatively, there is an incorrect tension of the belt element, a low level of compression in the engine. Finally, there is a high speed of the engine.
3. High vibration - you need to try to establish the source of the vibration. For example, vibration may occur in the handle, which was the result of an incorrect installation of a mounted set of implements and individual devices.

The Kipor walk-behind tractor is made in China, but boasts excellent quality and a long service life. This brand has recently appeared on the Russian market and is not very well known. However, in the EU countries it has been known for a long time and enjoys well-deserved popularity.

Distinctive features of walk-behind tractors

Kipor's equipment can be distinguished due to a large number of positive parameters. Competition in this area is at a fairly high level, especially among Chinese manufacturers. The Kipor company managed to stand out due to high quality equipment in terms of performance that is not inferior to European counterparts. Also worth noting is the well-thought-out design. Equipment manufacturer Kipor has earned a solid reputation through continuous improvement and innovation in the agricultural machinery it produces.

Motoblock Kipor meets all modern safety requirements and has well-thought-out ergonomics. In addition, Kipor is characterized by:

• High quality of both cast and stamped parts;
• High-tech processing of all surfaces;
• Quality welds;
• Painting is carried out on modern equipment;
• Careful assembly and accurate fitting of all parts;
• High quality components;
• Wide range of attachments.

For potential buyers, Kipor has provided a wide range of products. There are several main models on the market, all of which are characterized by thoughtful design and an impressive level of performance. You can highlight the main features characteristic of the entire model range.

The engines installed on the Kipor walk-behind tractors have an air filter of sufficient volume, which allows you to work in all weather conditions and with heavy dust. There is also a reservoir with a sufficient amount of oil, which allows you to work for a long time without making frequent breaks.

Thus, with timely maintenance, the device can last an extremely long time.

On models with steering, the steering wheel can turn 180 degrees. It is also necessary to consider the system for placing attachments. It can be attached not only in the back, but also in the front. This quality has significantly increased the functionality of agricultural machines. This technique is usually referred to as integral. Motoblock Kipor, attachments for which are presented in a wide range, will serve as a good assistant to its owner.

Separately, it is worth noting diesel power units. These motors are widely distributed in Europe. Diesel engines of this brand, made in China, have a long history of use and are famous for their reliability and unpretentiousness. The Kipor diesel engine for a walk-behind tractor is used on other various equipment of other brands and has shown itself in Russian conditions only on the positive side. For example, consider a specific model.

Motoblock Kipor 610

The KDT-610L agricultural machine is popular and competes well in the class of similar equipment from other manufacturers:

• The working shaft of the walk-behind tractor has a hexagonal shape. The Chinese manufacturer foresaw the occurrence of various situations and provided the opportunity to install a special axle shaft on the shaft. Thanks to this design solution, the owner of the walk-behind tractor got the opportunity to change the wheel track width. This solution will be very useful for cultivating land with different row widths. Using universal axle shafts, the wheels are set in the most convenient way at the moment. This elementary solution saved a lot of time required for cultivating the land on which various agricultural crops were planted.
• An experienced owner will appreciate the reliable drive KDT-610L. The Chinese manufacturer has moved away from the usual kinematic scheme of a walk-behind tractor. A three-strand pulley and, accordingly, three belts are installed here, which made it possible, in addition to power, to add solid reliability to the walk-behind tractor. An important positive point is the installation by the manufacturer of the splined shaft instead of the pulley.
• It is also worth noting the ergonomic control of the walk-behind tractor during operation. Devices that control work and movement are within easy reach of the operator. This condition made it possible to make work on the walk-behind tractor as comfortable as possible.
• The hinged equipment of Kipor motoblocks is presented quite widely. All of it has a successful design, predetermined by the right engineering solutions. For example, removable wheels can be replaced with wheels with special lugs or with a rotator cutter. It is a device capable of digging up the ground, without hanging additional devices. Also, in addition to widespread devices, you can find really unique ones, for example, a rotary mower.

Kipor walk-behind tractors have the ability to significantly facilitate work both on a personal plot and on fairly large areas. The owner of the walk-behind tractor will spend much less effort with an excellent result. Given the availability of components and attachments, this puts Kipor far above the competition.

Poll Options are limited because JavaScript is disabled in your browser.