Car model 12 296 01 internal dimensions. Technical characteristics of wagons

4-axle gondola car with hatches in the floor without a brake platform

4-axle all-metal gondola car model 12-296-01 with hatches in the floor is designed for the transportation of inert bulk, lumpy cargo that does not require protection from atmospheric precipitation. The gondola car can also be used for the transportation of stacked and piece cargo with fastening, in accordance with the rules of loading. The end and side walls are made by welded construction from sheets and studs. The end walls have transverse stiffeners. To unload bulk hatches, the gondola car is equipped with unloading hatches. To protect against blowing out bulk cargoes on the outer surfaces of the walls of the body of the gondola car, devices are provided for attaching a temporary shelter.

	Parameter	Meaning
	Maximum tare weight, t
	Carrying capacity, t
	Body volume, m 3
	Body length inside clear, mm
	Width of the body inside in the clear on the top rails, mm
	Body height inside, mm
	Length along the axes of automatic couplers, mm
	Maximum width, mm
	Height from rail head level, mm
	Number of unloading hatches, pcs.

Add model to comparison Compare models Clear comparison list

4-axle all-metal gondola car model 12-296-01 with hatches in the floor is designed for the transportation of inert bulk, lumpy cargo that does not require protection from atmospheric precipitation. The gondola car can also be used for the transportation of stacked and piece cargo with fastening, in accordance with the rules of loading. The end and side walls are made by welded construction from sheets and studs. The end walls have transverse stiffeners. To unload bulk hatches, the gondola car is equipped with unloading hatches. To protect against blowing bulk cargo on the outer surfaces of the gondola car body walls, devices are provided for attaching a temporary shelter.

Specifications of the wagon

Model:	12-296-01
Model number:	775
Name:	gondola car
Wagon type:	4-axle gondola car with hatches in the floor without a brake platform
Additional feature:	Characteristics does not contain
Model feature:	With unloading hatches and blind end walls (doors)
Accounting specialization of the model:	universal gondola car
Manufacturer:	Joint Stock Company of Altai Carriage Building (stamp 22)
Body material:	09G2S, 09G2D, 09G2, 09G2SD-12
Cart:	18-2128
Wagon axle:	4
Track width:	1520 mm
The presence of a transitional platform:	No
Parking brake available:	Eat
Possibility to install buffers:	No
Design speed:	120 km/h
Wagon tare (minimum):	23.0 t
Wagon tare (maximum):	24.0 t
Load capacity:	70.0 t
Volume:	83.0 m3
Maximum calculated static load from the wheelset on the rails:	230.5 kN
Wagon base:	8650 mm
Number of unloading hatches	14 pcs.
Opening angle of middle manhole covers	31°
Opening angle of manhole covers above bogies	29°
Manhole cover opening angle above the brake cylinder	27°
Car interior dimensions
Height:	2060 mm
Width:	2911 mm
Length:	12722 mm
External dimensions of the wagon
Height from rail head level:	3495 mm
Maximum Width:	3130 mm
Dimensions according to GOST 9238-2013:	1-T
Length along the axes of automatic couplers:	13920 mm
Frame length:	12700 mm
Starting year of series production:	2004
Normative service life:	22
Description on the manufacturer's website

Overhaul runs and timing of scheduled repairs for the car mod. 12-296-01

De-povs-coy repair (DR) after	The buildings	3 years
	Depot repair (DR) to the first overhaul (CR)	1 year
	Depot repair (DR) after the first overhaul (CR)	1 year
	Capital repairs (KR)	2 years
Ka-pi-tal-ny repair (KR) after	The buildings	11 years
Mileage after	The buildings	210 thousand km
		3 years
	Depovsky repair (DR)	110 thousand km
		2 years
	Capital repairs (KR)	160 thousand km
		2 years
	Overhaul with service life extension (KRP)	210 thousand km
		3 years

Photos of the car

Other modifications of the car model 12-296-01

• Gondola car model 12-296-01, Kemerovokhimmash-branch of JSC "Altaivagon", release since 2019

The characteristics of various modifications are generally similar, manufacturers, load capacity, bogie models may differ. You can use the wagon comparison service to see the differences (the button under the heading of the wagon model at the top of the page).

The characteristics of the cars are obtained from open sources, if you find errors or inaccuracies, please contact us for correction.

Add model to comparison Compare models Clear comparison list

A gondola car with hatches in the floor is designed for the transportation of inert, bulk, large-sized cargoes that do not require protection from atmospheric precipitation. The gondola car can also be used for the transportation of stacked and piece cargoes with their fastening in accordance with the requirements of the loading rules. It can be operated on the railway network of Russia, CIS and Baltic countries. The car is equipped with an automatic coupler, a draft gear, an automatic brake, a cargo auto mode, and a parking brake. The car body is of all-metal construction. To unload bulk cargo, the wagon is equipped with unloading hatches in the floor.

Specifications of the wagon

Model:	12-296
Model number:	688
Name:	gondola car
Wagon type:	4-axle gondola car with hatches in the floor without a brake platform
Additional feature:	Characteristics does not contain
Model feature:	With unloading hatches and blind end walls (doors)
Accounting specialization of the model:	universal gondola car
Manufacturer:	Joint Stock Company of Altai Carriage Building (stamp 22)
Body material:	09G2S, 09G2D, 09G2, 09G2SD-12
Cart:	18-100
Wagon axle:	4
Track width:	1520 mm
The presence of a transitional platform:	No
Design speed:	120 km/h
Wagon tare (minimum):	23.0 t
Wagon tare (maximum):	24.5 t
Load capacity:	69.5 t
Volume:	76.0 m3
Maximum calculated static load from the wheelset on the rails:	235.0 kN
Wagon base:	8650 mm
Car interior dimensions
Height:	2060 mm
Width:	2911 mm
Length:	12722 mm
External dimensions of the wagon
Height from rail head level:	3495 mm
Maximum Width:	3180 mm
Dimensions according to GOST 9238-2013:	1-T
Length along the axes of automatic couplers:	13920 mm
Frame length:	12700 mm
Floor height from rail head level:	1419 mm
Automatic coupler height from the level of the rail head:	1040..1080 mm
Starting year of series production:	2003
Normative service life:	22

Overhaul runs and timing of scheduled repairs for the car mod. 12-296

De-povs-coy repair (DR) after	The buildings	3 years
	Depot repair (DR) to the first overhaul (CR)	1 year
	Depot repair (DR) after the first overhaul (CR)	1 year
	Capital repairs (KR)	2 years
Ka-pi-tal-ny repair (KR) after	The buildings	11 years
Mileage after	The buildings	210 thousand km
		3 years
	Depovsky repair (DR)	110 thousand km
		2 years
	Capital repairs (KR)	160 thousand km
		2 years
	Overhaul with service life extension (KRP)	210 thousand km
		3 years

Photos of the car

Other modifications of the car model 12-296

The characteristics of various modifications are generally similar, manufacturers, load capacity, bogie models may differ. You can use the wagon comparison service to see the differences (the button under the heading of the wagon model at the top of the page).

The characteristics of the cars are obtained from open sources, when errors and inaccuracies are found Contact us for correction.

"model 12-132-02"

"model 12-175"

"model 12-1295"

"model 12-1302"

"model 12-1293"

"model 12-9085"

"model 12-296-01"

Covered wagons:

"model 11-280 (138m3)"

"model 11-276 (122m3)"

"model 11-K001 (120 cubic meters)"

Platforms:

"platform for tank containers model 13-4012-09"

"platform with wood-metal flooring, model 13-4012 (13300mm)"

"platform for large containers and wheeled vehicles, model 13-9007 (18300mm)"

"platform for wheelsets"

"Platform for wheelsets"

Specifications

• Carrying capacity is not more than 69.5 tons.
• Tare weight - 24±0.5t
• The length of the gondola car along the axes of the coupling of auto couplers is not less than 13920mm
• Body volume - 88m3
• Gondola base - 8650mm
• Trolley base - 1850mm
• Height from the rail head to the top trim - 3780mm
• Internal dimensions of the body:
• clear length - 12750mm
• height - 2365mm
• Dimensions according to GOST 9238:
• body - 1-VM
• trolleys - 02-VM
• Trolley model - 18-100

Universal gondola car: model 12-132-02

The gondola car is intended for general network use on the railways of the Russian Federation and the CIS countries and the Baltic states with a gauge of 1520 mm for the transportation of mass non-aggressive, bulk non-dusty, bulk cargoes with a temperature not exceeding +100 C, which do not require shelter from atmospheric precipitation, as well as stacked and piece goods with fastening them in accordance with the requirements of the rules for loading and securing cargoes with a temperature not exceeding +100 C.

The gondola car is made in the "U" version of category 1 in accordance with GOST 15150, ensuring operational reliability at the lower operating and limiting temperatures of minus 50C.

Specifications: Carrying capacity no more - 69,7t. Tare weight - 23.8±0.5t The maximum calculated static load from the wheelset on the rails is 230.3 kN (23.5 tf) The length of the gondola car along the axes of coupling of auto couplers is not less than 13920mm Body volume - 77 m3 Design speed - 120km/h Gondola base - 8650mm Trolley base - 1850mm Width external on racks to the top trim - 3158mm Height from the rail head to the top trim - 3490mm Internal dimensions of the body: clear length - 12750mm clear width in the middle section - 2911mm height - 2075mm Dimensions according to GOST 9238: body - 1-VM trolleys - 02-VM The number of unloading hatches - 14 pieces. Trolley model - 18-100 Automatic coupler type - SA-3 non-rigid

Gondola car 12-175

The four-axle gondola car 12-175 with a solid rounded bottom of the body was manufactured by State Production Association "Uralvagonzavod" and is intended for the transportation of loose, lumpy, piece and other non-aggressive cargoes that do not require protection from atmospheric precipitation. This car can carry bulk non-dusty, bulk cargo with unloading on car dumpers and a temperature not exceeding 100 degrees Celsius. The lower temperature limit at which the operational reliability of a gondola car is achieved is minus 50 degrees Celsius.

There are no end doors and unloading hatches in the gondola car.

The carrying capacity of the gondola car 12-175 reaches 69 tons, the tare weight of the gondola car is 25 tons, the volume of the body is 88 cubic meters. The floor area of ​​a gondola car is 37 sq. m.

Gondola car 12-175 can move at a design speed of 120 km/h.

The gondola car model is equipped with a parking brake and does not have a transition platform.

Specifications

Gondola car 12-1295

Designed for the transportation of piece and bulk cargo requiring protection from atmospheric precipitation.

Specifications

• Load capacity, 75t

• Tare weight, 24.5±0.5%t
• Body volume full 86, m3
• Dimensions according to GOST 9238-83 1-VM
• Body internal dimensions, mm
• clear length 12768
• height 2300

4-axle gondola car, model 12-1302

Purpose: for the transportation of bulk, lumpy, piece and other goods that do not require protection from atmospheric precipitation.

Specifications

• Car type - 600
• Carrying capacity, t - 70.5
• Wagon tare weight, t - 23.5
• Static axial load, kN (tf) - 230 (23.5)
• Body volume, m3: 77
• Size 1-VM
• Car base, mm 8650
• Length, mm:
• along the clutch axes of automatic couplers 13920
• along the end beams of the frame - 12780
• Maximum width, mm - 3165
• Maximum height from the top of the rail heads, mm - 3500
• Number of axles, pcs. - 4
• 2-axle bogie model - 18-100
• The presence of a transitional platform - no
• Parking brake - yes
• Body internal dimensions, mm:
• width - 2911
• length - 12750
• height - 2065
• Angle of inclination of manhole covers during unloading, deg:
• medium - 31
• above carts - 22
• above the brake cylinder - 27
• The presence of end doors - no
• Number of unloading hatches, pcs - 14
• Year of mass production - 2006

Possibility to install buffers - no

Gondola car 12-1293

Gondola car model 12-1293 Designed for transportation of bulk cargo.

• Load capacity, 70t
• Tare weight, 24±0.5%t
• Body volume, 86 m3
• Number of unloading hatches 14
• Dimensions according to GOST 9238-83 1-VM
• Body internal dimensions, mm
• clear length 12768
• clear width over top rails 2928
• height 2300
• Cart model 18-100

Gondola car model 12-9085

Universal four-axle, all-metal gondola car with a body of increased volume. Load capacity 70t. The gondola car has 14 unloading hatches. The body and hatches of the gondola car are made of steels: 09G2S, 09G2D, 10HNDP. Chassis - two biaxial bogies mod. 18-100

The gondola car is designed for the transportation of inert, bulk, large-sized cargoes that do not require protection from atmospheric precipitation. Also, the gondola car can be used for transportation of stacked and piece cargoes with their fastening in accordance with the rules of loading.

It can be operated on the road network of Russia, CIS and Baltic countries. The car is equipped with a parking brake, cargo auto mode. The design of gondola car 12-9085 is protected by a patent of the Russian Federation for utility model No. 74610 "Railway gondola car".

Maximum load capacity, t.		Height of the car from the level of the rail heads, mm
Tare weight, t.		The length of the car along the axes of coupling of automatic couplers, mm
Load from the wheelset on the rail, tf.		Height inside on the side wall, mm
Constructional speed, km/h		Wagon width maximum, mm
Dimensions GOST 9238		Body width inside, mm
Body volume, cubic meters		Body length inside, mm
Trolley Model		Number of unloading hatches, pcs

Model 12-296-01

4-axle all-metal gondola car model 12-296-01 with hatches in the floor, designed for the transportation of inert bulk, lumpy cargo that does not require protection from atmospheric precipitation. The gondola car can also be used for the transportation of stacked and piece cargo with fastening, in accordance with the rules of loading. The end and side walls are made of welded construction from sheets and studs. The end walls have transverse stiffeners. To unload bulk hatches, the gondola car is equipped with unloading hatches. To protect against blowing bulk cargo on the outer surfaces of the gondola car body walls, devices are provided for attaching a temporary shelter.

Covered wagons

4-axle covered (TSMGV) with widened doorway, model 11-280 (138m3)

• Car model 11-280
• Wagon tare weight, t 26
• Load capacity, kg 68000
• Body length inside, mm 15724
• Body width inside, mm 2764
• Clear dimensions mm:
• doorway 3802х2334
• loading hatch in the roof - O 400
• Body volume, m3 138
• Car base, mm 12240
• Length, mm:
• along the axes of coupling of automatic couplers 16970
• but end beams frame 15750
• Maximum width, mm 3266
• maximum 4693
• to floor level 1286
• Number of axles, pcs 4

4-axle covered (TSMGV), with a widened doorway, transition platform, model 11-276 (122m3)

• Purpose: for the transportation of goods requiring protection from atmospheric precipitation
• Car model 11-276
• Wagon tare weight, t 26
• Load capacity, kg 68000
• Body length inside mm 13844
• Body width mm

• inside 2764
• by frame 2790
• Body height along the side wall, mm 2800
• Clear dimensions mm
• doorway 3802х2334
• loading hatch in the side wall 614x363
• Body volume, m3
• roofless 104
• full, taking into account the volume of the roof 122
• Car base, mm 10000
• Length mm
• along the axes of coupling of automatic couplers 15360
• along the end beams of the frame 14 570
• Maximum width, mm 3266
• Height from top level of rail heads, mm
• maximum 4688
• to floor level 1286

4-axle covered (TSMGV), model 11-K001 (120 cubic meters)

• Purpose: for the transportation of goods requiring protection from atmospheric precipitation
• Car model 11-K001
• Wagon tare weight, t 22.88
• Load capacity, kg 68000
• Body length inside, mm 13844
• Body width inside, mm 2760
• Body height along the side wall, mm 2791
• Clear dimensions, mm

• doorway 2000х2296
• loading hatch in the side wall 690x370
• loading hatch in the roof O 400
• Body volume, m3
• up to hatch level 88.33
• full, taking into account the volume of the roof 120.15
• Height from top level of rail heads, mm
• maximum 4650
• up to floor level 1280
• Car base, mm 10000
• Length, mm
• along the axes of coupling of automatic couplers 14730
• along the end beams of the frame (frame length) 13870
• Maximum width, mm 3228

Number of axles, pcs 4

Platforms

4-axle platform for tank containers (tank containers), model 13-4012-09

Specifications

• Purpose: for transportation (tank containers) tank containers
• Car model 13-4012-09
• Wagon tare weight, t 18.24
• Load capacity, kg 72000
• Area, m2 36.8
• Internal dimensions, mm:

• length 13300
• width 2770
• Number of stops for fastening containers, pcs 8
• Car base, mm 9720
• Length, mm.
• along the end beams of frame 13400
• Maximum width, mm 2870
• Height from the level of the top of the rail heads, mm:
• maximum 1400
• up to floor level 1310

4-axle platform with wood-metal flooring, model 13-4012 (13300mm)

Specifications

• Purpose: for the transportation of large-tonnage 20 and 40-foot containers with a gross weight of 10, 20 and 30 tons in the amount of:
• 2 x 20 feet;
• 3 x 20 feet;
• 1 x 40ft;
• 1 x 40ft and 1 x 20ft;
• as well as wheeled vehicles: truck cranes, wheel loaders, trucks, specialized vehicles, mobile buildings and change houses.
• Car model 13-9007
• Wagon tare weight, t 25.2
• Load capacity, kg 68000
• Area, m2 52.8
• Internal dimensions
• body length, mm 18300
• body width, mm 2870
• Floor dimensions with open sides, mm
• length 18300
• width 2870
• Board height, mm
• no longitudinal
• face 400
• Number of boards, pcs
• no longitudinal
• end 2
• Car base, mm 13900
• Length, mm:
• along the clutch axes of automatic couplers 19620
• along the end beams of frame 18400
• Maximum width, mm 3056
• Height from top level of rail heads, mm
• maximum 1742
• to floor level 1395
• Number of axles, pcs 4
• Number of stops for fastening containers, pcs:
• tipping 20

4-axle platform for wheelsets

Specifications

• Purpose: for the transportation of wheelsets with the right to enter the tracks of Russian Railways
• DVZ car model
• Wagon tare weight, t 24
• Load capacity, kg 70000
• The number of transported wheel sets in one container, pcs 12
• Number of containers, pcs 3
• Container dimensions, mm
• length 4520
• width 1998
• Car base, mm 9720
• Length, mm
• along the axes of coupling of automatic couplers 14620
• but end beams frame 13400
• Maximum width, mm 2870
• Height from the top of the rail heads

maximum, mm 3400