What kind of oil to fill in Toyota Corolla 1.6. Engine oil for Toyota Corolla: selection and replacement

26.09.2019

Body

Many car owners often think about , what kind of oil is better to pour into the Corolla. The options can be varied, because in addition to the original lubricants, there is a good selection of analogues of various quality and cost. Before buying, you need to understand the intricacies of choice.

What lubricant is suitable?

In the car's service book, you can find information about which oil is suitable for the E150 engine or another model that you own. If you don’t have a service book, you can choose the right lubricant using a table that many motor oil sellers can offer.

Thanks to the catalog, you can find out exactly whether your car needs synthetic or mineral fluid, what viscosity is suitable for it, and how much oil you need to fill in your Toyota.

Genuine products are usually recommended by the factory as they are optimally suited to the engine, but such products are quite expensive, and if you buy them in an unverified place, there is a high risk of acquiring a fake. It is not at all necessary to buy only original oil, especially if you have an older car. It is enough to choose a lubricant similar in viscosity and other parameters from any manufacturer that you trust, and whose product price suits you.

For example, for a 2008 Toyota E 150, the service book recommends filling in synthetic products, the viscosity of which may vary. Most drivers fill in a 10W-30 universal fluid, in addition to it, engine oil with a viscosity of 5W-30, -20, as well as a rather rare 0W-20, is suitable.

The 1.6 petrol engine, according to the API specification, requires SL, SM engine oil. Products with this marking are also suitable for cars manufactured in 2001, 2003, 2006, 2010. However, it is worth paying attention to the fact that such marking is inherent only in older generations of lubricants. For vehicles manufactured in 2012, 2013, 2014, 2015, fluids of the same viscosity, but marked SN, are applicable. This is a newer label.

If your car was manufactured from 2002 to 2011, and old-type lubricants are not for sale in your region, you can safely purchase products with the SN marking. For example, the manufacturer recommends 5W-30 SN oil for the year of manufacture. For gasoline engines, the bottle must be marked PI.

There are Sprinter fluids, they are designed for small vans, sports cars, like a 2013 Toyota Corolla. The difference between such oils and conventional oils lies in the improved formula, thanks to which the engine, which is experiencing increased loads, cools better, protects against rust and other unpleasant phenomena associated with the operation of the car. This oil is recommended for Toyota Corolla turbocharged.

If the engine was produced before 2013, the choice of oil should be focused on high anti-corrosion and anti-wear properties, since older power units have thinner walls and need special protection. Suitable products labeled SL, which has an improved formula. You can infuse energy-saving products, they are well suited for generation 110.

Possible problems with high consumption of lubricants

The engine oil level must be checked regularly. Ideally, the mark should be kept in the middle. Consumption tolerances should not exceed liters per 10 thousand km for a used car. If the car eats grease, you need to pay attention to the condition of its power unit, most likely it needs to be repaired.

For example, if the oil pressure sensor is constantly on, it doesn’t matter if you have generation 110 or another model, it will not be superfluous to check not only the level, but also the sensor itself. If you find that the car is eating oil, for example, about a liter began to leave for 1 thousand km, it's time to repair the engine. Most often, Toyota eats if the rings and valve stem seals are worn out: by replacing them, you can get rid of the problem.

It happens that the oil pressure is normal, the rings are new, but the machine still eats lubricating fluid in large quantities. In this case, you need to check the oil pump, especially if you have previously used a low-quality motor product. In this case, it will be necessary not only to replace the defective part, but also to completely replace the oil with a better one.

It is worth paying attention to the fact that a serviceable car can eat oil if it is of poor quality and its viscosity is insufficient: such a substance is simply squeezed out through various slots, for example, it can leak from under the filler cap.

That is why, when deciding which oil to pour, you should not save at all by purchasing cheap products of dubious quality. Repair and replacement of the fluid with a suitable one will cost much more.

How to change the lubricant yourself?

Having decided which oil to fill in, you have to think about whether to change it at a car service or do it yourself. Many sellers charge extra for liquids, but offer free replacements. If you do not want to waste time or do not have suitable conditions for self-replacement, then you can use the services of a car service, they can also tell you how much oil you need. If the products are offered for bottling, you will not have to overpay for extra liters. It is worth paying attention to the fact that along with changing the lubricant, the oil filter is also changed. It should be bought immediately.

If you want to change fluids yourself, you can do it in a garage. To do this, you need a pit or overpass. Before replacing the car, you need to warm it up, for this it is enough to drive a few blocks. After that, install Toyota over the pit. Make sure that the car is not tilted. It is better to work with gloves, as the drained liquid will be hot. Prepare in advance a container of a suitable volume into which you will drain the waste liquid, unscrew the drain plug: it is located on the crankcase. Wait a few minutes for all the grease to drain, then change the oil filter.

Screw the plug back on and start replacing the fluid: fresh oil is poured through the neck, which is located under the hood. Check the level: after it is in the middle, start the car, let it run for about a minute and check the fluid level again. If it's still low, add more. Before starting work, it is recommended to watch a video illustrating how this is done.

Conclusion

So, for pouring into the motor, it is necessary to select a lubricant of a certain type, depending on different conditions. Do not forget how important this is for the good operation of the unit. Changing the lubricant is quite within the power of each driver, subject to the rules for carrying out this work.

Many car enthusiasts dream of buying a Toyota Corolla, becoming the owner of a comfortable, prestigious car. The model really deserves the highest rating. But it requires quality care. One of its important components is timely oil change. Moreover, you need to choose a lubricant carefully so that your favorite car performs its function flawlessly for as long as possible. You should know what kind of oil to fill in Toyota Corolla, follow the recommendations of the manufacturer, specialists.

An owner who has purchased a Toyota Corolla from scratch can read the instructions, which contain information about which oils can be used for a car. But among the owners of this model, there are a lot of those who bought a car from their hands. In this case, the instructions for the machine usually no longer exist.

Toyota is adamant in its belief that only special Toyota oils should be used for its cars, regardless of brand. In particular, oil is recommended for the Corolla model

This lubricant is made from synthetic components and is of high quality. The oil is universal, suitable for all seasons.

Novelties: new Toyota Prado 2016 - watch, new Toyota Fortuner 2016 - watch.

It is known that synthetic lubricants, ideally fulfilling their purpose on new power units, behave differently in old engines. There is a serious risk of leakage through seals, seals. Therefore, if the car has a solid age, high mileage, it is advisable to choose a more viscous option - SAE 5W40.

Alternative Acceptable Oils

It is not always possible to purchase a "native" lubricant. In this case, you need to consider alternatives that can be a worthy replacement for Toyota.

If the car engine is relatively "young", you can choose oil

This material is also synthetic, its viscosity is slightly higher than that of Toyota lubricant. As an alternative, one can consider

But the previous lubricant is preferable.

In a Toyota Corolla equipped with a catalyst, you can fill in Dragon sm 5W30 lubricant. The oil has a decent quality, which is noted by both car owners and specialists. But keep in mind that this lubricant has a low alkaline number.

Important! Therefore, in a car without a catalyst, it is not worth pouring it. When using this material, it is recommended to change it every six thousand kilometers traveled.

Car owners should remember that there are a lot of fake motor oils on our market. No need to take risks, purchase a product in unfamiliar points. It is better to buy oil in reliable services, proven car dealerships. Toyota Corolla is worth such attention.

Watch an interesting video on this topic

When choosing a car oil for summer or winter, it is important to purchase a lubricant that has an optimal viscosity suitable for the motor. To simplify the selection of lubricant, you can use the information contained in the operating instructions for the car. This manual describes the parameters of the recommended engine oil for Toyota Corolla.

Model 1995 release

The selection of engine oil is carried out taking into account the type of car engine.

Petrol power units

Scheme 1. Recommended car oil density for models up to 1995 of release.

According to this scheme, for the winter, when the air temperature is below +8 0 C, it is better to use motor fluids with a viscosity parameter of 5w-30. The use of lubricants with a viscosity of 10w-30, 15w-40 or 20w-50 is advisable at temperatures above -18 0 C; in lower temperature conditions, the use of these oils will lead to poor engine start and increase fuel mixture consumption.

Scheme 2. The dependence of the viscosity of the motor fluid on the temperature of the region in which the machine is operated (models equipped with gasoline engines since 1995).

* - model 4A-GE.

** - except for model 4A-GE.

10w-30 is poured at temperatures above -20 0 C;
5w-30 is poured into the 4A-GE model if the thermometer is below +10 0 С;
in a wide temperature range, from -30 0 C (or less) to +40 0 C (or more), 5w-30 is used (except for model 4A-GE).

Diesel car engines

According to the manual for Toyota Corolla, it is recommended to use CD, CE or CF oil type according to API classification. The viscosity of lubricating fluids for models up to 1995 is selected according to scheme 1, and for complete sets from 1995, the selection of viscosity parameters is performed according to scheme 3.

Scheme 3. Recommended viscosity for models since 1995 of release.

Based on the data of scheme 2, at temperatures above -20 0 C, 10w-30 is used. 5w-30 oils are used in regions with air temperatures below +10 0 C.

Refueling volumes

The volume of engine oil between the "maximum" and "minimum" marks on the dipstick is approximately 1 liter. Refueling capacities for Toyota Corolla:

Engines 2E and 3E:

2.7 l with oil filter;
2.5 liters excluding oil filter.

Motors 4E-FE or 5E-FE:

2.8 l with filter change;
2.6 liters without changing the oil filter.

Auto engines 5A-FE, 4A-FE (2WD):

3.0 l including oil filter;
2.8 liters without changing the oil filter.

Power units 7A-FE:

3.7 l with oil filter;
3.5 without replacing the filter unit.

4A-GE engines:

3.0 l with filter change;
2.8 liters without changing the oil filter.

Power units 2C (until 1994):

4.7 l with oil filter;
4.2 liters without oil filter.

2C (from 1994 to 1995):

4.3 l with filter change;
3.6 liters excluding oil filter.

Power units 2C (since 1995 2WD):

4.1 l with oil filter change;
3.4 liters without changing the oil filter.

2C engines (since 1995 4WD):

4.4 l with oil filter;
3.7 liters without oil filter.

Motors 3C-E(2WD):

5.1 l with oil filter;
4.4 l without filter device.

Powertrains 3C-E(4WD):

4.9 with oil filter replacement;
4.2 liters without changing the oil filter.

Toyota Corolla E110,E111 1997-2002

Car photo

According to the operating instructions for the machine, the recommended engine oil for Toyota Corolla is selected according to the type of engine. For 2E 1.3l power units, CD, CE or CF motor oils must be used in accordance with the API system or lubricants of a higher quality class. The recommended lubrication density is shown in Diagram 4.

Scheme 4. The influence of air temperature on the selection of the viscosity of motor fluid for 2E 1.3l engines.

In accordance with scheme 4, it is recommended to use lubricants 15w-40, 20w-40 and 20w-50 if the temperature outside the car is above -9 0 C. If the thermometer is above -23.5 0 C, you should use fluids 10w-30, 10w -40 or 10w-50. If the temperature is less than +8 0 C, then it is recommended to fill in 5w-30.

In the case of 4E-FE 1.3L power units, it is recommended to use SG, SF or higher oil type according to API requirements. The viscosity of the motor fluid is selected according to scheme 5.

Scheme 5. Recommended engine fluid density for 4E-FE 1.3l motors.

According to scheme 5, at temperatures below +8 0 C, 5w-30 is poured. Car oils 10w-30 are used when the temperature is above -18 0 C, and 15w-40 or 20w-50 is poured if the temperature is above 12.5 0 C.

For 4ZZ-FE 1.4 liter Toyota Corolla engines, oils of at least SJ class according to the API system must be used. You can also use energy-saving motor oils with the inscription "Energy Conserving" on the canister. The density of the recommended motor oil is selected according to scheme 6.

Scheme 6. Recommended engine fluid density for 4ZZ-FE 1.4l engines.

In a wide temperature range, the manufacturer recommends using 5w-30 lubricants. If the air temperature is above -18 0 С, then the manufacturer recommends pouring thicker oils 10w-30, 15w-40 or 20w-50.

Refueling volumes

The volume of engine fluid required for replacement is:

Auto engines 2E 1.3l and 4E-FE 1.3l:

3.2 l with oil filter change;
2.9 liters excluding oil filter.

Motors 4ZZ-FE 1.4l:

3.7 l with oil filter change;
3.5 excluding oil filter.

Toyota Corolla E120, E130 2001-2007 release

Model year 2006

For Toyota Corolla, the manufacturer recommends using original Toyota Genuine Motor Oil lubricants. The vehicle manufacturer also allows the use of alternative oils that are of appropriate quality. Engine oil requirements:

All-weather motor fluids SL or SM according to API classification with a viscosity of 20w-50 or 15w-40;
Motor oils with a viscosity of 10w-50 or 15w-40 of the SL or SM class according to API classification with the inscription "Energy Conserving", which means energy-saving.
Multi-purpose lubricants certified by ILSAC.

To select the viscosity of motor lubricant, scheme 7 is used.

Scheme 7. Recommended viscosity of motor fluid.

According to scheme 7, 5w-30 motor oils are the best choice for saving the fuel mixture and good starting the engine in cold weather. At temperatures above -18 0 C, the manufacturer recommends using engine oils with viscosity indices of 10w-30, 15w-40 or 20w-50.

Refueling volumes

The approximate amount of engine fluid needed to raise the level between the low and full levels on the dipstick is 1.5 liters. The volume of engine oil required when changing is 4.2 liters including the oil filter and 4.0 liters without changing the oil filter.

Toyota Corolla E140, E150 2006-2013 release

Model year 2008

Petrol power units

The recommended engine oil for Toyota Corolla is selected based on the type of car engine. For gasoline engines, it is recommended to use motor oils with a viscosity of 15w-40 or 20w-50, corresponding to the SL or SM category according to API classification.

For 4ZZ-FE engines, oils must comply with SAE 10w-30 or 5w-30, also be ILSAC certified and meet SL "Energy Conserving" or SM "Energy Conserving". Viscosity selection is performed according to scheme 8.

Scheme 8. Recommended viscosity for Toyota Corolla cars with 4ZZ-FE, 1ND-TV and 1AD-FTV engines (models ADE150L-AEFNYW and ADE150R-AEFNYW * 1).

Fuel economy and a good engine start in cold weather are facilitated by the use of motor oils with a viscosity of 5w-30. For regions in which the air temperature outside the machine is above -18 0 С, it is permissible to fill in lubricants 10w-30, 15w-40 or 20w-50. In the absence of 5w-30, it is permissible to fill in 10w-30, but the next time it is replaced, it must be changed to 5w-30.

viscosity 10w-30, 5w-30, 5w-20 or 0w-20;
oil class SL "Energy Conserving" or SM "Energy Conserving";
ILSAC certified universal greases.

When choosing a lubricant viscosity for a 1ZR-FE engine, use scheme 9.

Scheme 9. Recommended viscosity for 1ZR-FE motors.

According to scheme 9, 0w-20 lubricants are the best option to save the fuel mixture and start the engine well in cold weather. If this oil is not available, then a 5w-30 smear is allowed, but at the next replacement it must be changed to 0w-20.

Diesel car engines

For models 1ND-TV, ADE150L-AEFNYW and ADE150R-AEFNYW *, lubricants must be used that comply with ACEA class B1 and API CF-4 or CF oil type. It is also possible to apply the CE and CD classes in accordance with the API regulations. The viscosity of the oil is selected according to scheme 9.

In the case of 1AD-FTV models (model ADE150L-AEFNXW *), it is necessary to fill in ACEA oil class C2, in the absence of these lubricants, it is permissible to use ACEA B1. To select the viscosity of the lubricant, scheme 10 is used.

Scheme 10. Recommended viscosity of engine lubricant for 1AD-FTV engines (model ADE150L-AEFNXW *).

(*) - model code is indicated on the manufacturer's label.

Refueling volumes

Refueling capacities for Toyota Corolla:

4ZZ-FE auto engines:

4.2 l with oil filter;
4.0 liters without changing the oil filter.

Motors 1ZR-FE:

4.2 liters if you take into account the filter;
3.9 liters excluding oil filter.

Power units 1ND-TV:

4.3 liters if you take into account the filter;
3.8 liters without oil filter.

1AD-FTV engines:

6.3 liters with oil filter change;
5.9 liters without changing the oil filter.

The maximum oil consumption is 1l / 1 thousand km. The approximate amount of lubricant required for its level to occupy the middle position between the upper and lower marks on the dipstick is:

1.5 l for 4ZZ-FE and 1ZR-FE engines;
1.8 l for 1ND-TV motors;
1.7 liters in the case of 1AD-FTV power units.

Toyota Corolla E160, E170 since 2012 release

Model 2014 release

Gasoline motors

Manufacturer's requirements for engine oil for Toyota Corolla:

original motor fluids "Toyota Genuine Motor Oil" or other motor oils of the appropriate quality (possibly with tolerances on the canister);
motor oil viscosity 0w-20, 5w-30, 10w-30 and lubrication class SL "Energy Conserving" or SM "Energy Conserving";
ILSAC universal motor fluid with a viscosity of 15w-40;
universal motor fluids of class SL, SN, SM according to API classification.

Viscosity selection is performed using scheme 11.

Scheme 11. Recommended viscosity of motor fluid.

According to scheme 11, it is preferable to use 0w-20 motor oils, in their absence it is permissible to fill in 0w-30, which must be changed to 0w-20 upon subsequent replacement. When using 10w-30 or 15w-40 oils in cold weather (temperatures below -18 0 C), fuel consumption may increase and the engine start may deteriorate.

Diesel engines

Engine fluid requirements:

Toyota Genuine Motor Oil branded motor oils or alternative lubricants of the appropriate quality;
grease class C2 according to ACEA.

When choosing viscosity, use scheme 12.

Scheme 12. dependence of the viscosity of the motor fluid on the air temperature.

According to scheme 12, it is preferable to use 0w-30 motor oils, they help to reduce fuel consumption. In the absence of the specified auto oil, it is permissible to pour 5w-30 lubricants, which, upon subsequent replacement, are changed to 0w-30.

Refueling volumes

The volumes required when changing the car oil:

Motors 1NR-FE:

3.4 liters, including the filter;
3.2 liters without oil filter.

Engines 1ZR-FE, 2ZR-FE and 1ZR-FAE:

4.2 l with filter;
3.9 liters without oil filter.

Auto engines 1ND-TV (for Turkey):

3.9 l with oil filter;
3.5 l without filter;

1ND-TV (except Turkey):

3.7 l with oil filter;
3.3 liters without oil filter.

Conclusion

The consumption of motor lubricant in the engine depends on the quality and viscosity of the lubricant. The recommended engine oil for Toyota Corolla has optimal parameters, protects the engine from overheating in the heat and starts the power unit without warming up in cold weather. When operating a car, keep in mind that even the recommended car oil can liquefy, therefore, with frequent use of the car in extreme conditions, it is worth changing the lubricant more frequently than specified in the regulations.

The automaker of the Toyota Corolla brand of cars recommends the use of original synthetic oils from Castrol Mobile and many other well-known manufacturers. But today, branded car services do not recommend using products of European quality. To figure out who to give preference to, first you need to consider Japanese products specifically for the Toyota Corolla brand.

Japanese oil is produced under the name "Toyota", in most cases it is used in the domestic market. Exxon Mobil is the main manufacturer cooperating and remediating oil spills based on a contract system with Toyota Corporation.

There are many brands, which in turn are produced at the same factory. Each type uses a different recipe. Before the development of engine oils for Toyota Corolla, numerous scientific works were carried out. This was necessary for an impeccable performance, taking into account the characteristics of different types of engines. All products of these brands have energy-saving properties and excellent quality.

Japanese engine oils for Toyota Corolla and their features

In order to come to a choice of which products to pour into the engine of a car, it is necessary to study the benefits of all types of oils. Toyota Corolla brand engine products are capable of performing 4 functions:

Toyota original products contain additives that are attached to metal parts of various types of installations. If you still use the material for Toyota Corolla, then the result will be excellent. The car will not overheat, the parts will slide easily.
The brand for Toyota Corolla contributes to the reliable sealing of cylinders that have microgaps. Allows you to maintain compression that helps the engine not lose power.
Another advantage is the removal of excess heat from the hot zone, which is located in the motor part, dissipating it in the radiator area.
Toyota engine oil contains so-called detergent additives. They are able to clean engine parts, preventing formations that have arisen at high temperatures.

Toyota brand engine oil has distinctive features. It contains more than seventy minerals, which in turn are responsible for its highest quality. It should also be noted that this Toyota Engine Oil product has several degrees of viscosity: OW-20, OW-30, 5W-30, 5W-40. OW-20 products have excellent performance, which is suitable for our Russian climate.

With the correct selection of oil, ensure the minimum fuel consumption. The original Toyota brand has a drawback that plays an important role. It consists in a low number of alkali. When using oils with a higher alkalinity, the engine is able to cope with poor-quality fuel.

How often should I change engine oil for Toyota Corolla brand

It is necessary to change engine oil at intervals of about ten thousand kilometers of the car. But most often, car owners change engine oil at five thousand.

For the correct replacement of engine oil, it is necessary to use a vessel where the spent residues will merge. It should hold four liters. You will also need rubber gloves to keep your hands from getting burned due to the high temperature of the oil. In order to unscrew the oil filter, you will need a strap wrench.

Engine oil change process for Toyota Corolla:

It is necessary to put the car in a pit. Distribute the necessary tools so that they are at hand.
If the car has not been started, then warm it up. This is necessary so that the oily liquid warms up and becomes more liquid.
Next, turn off the car if the engine is warm.
Take a vessel and put it under the drain.
Open the drain plug. The content will spill out.
Take a funnel and point to the oil fill hole. It needs to be added gradually.
Then check the fill level with a dipstick.

The history of the Corolla range dates back to 1966, when a compact novelty from Toyota first rolled off the assembly line. After 8 years, she became the Guinness book record holder as the best-selling car on the planet. Today Corolla is already presented in the 11th generation and the concern is not going to stop there. Corolla has a wide range of engines with a variety of technical specifications: from barely running to amazing 240-horsepower copies of the 4A-GE TRD line with a volume of 1.6 liters. In this article, you will be able to get acquainted with information about what kind of oil to pour into them and how much.

The model began to truly conquer the domestic market in the 90s with the release of the seventh generation (1991). Then only carburetor 1.3-liter modifications of the previous generation were imported into Russia. The Corolla E110 debuted in 1995 and outwardly it completely repeated the E100. The engines did not change the volume - these are the same engines in the range of 1.3-2.2 liters, producing 70-165 hp. The ninth generation since 2000 was already based on the Toyota Vista platform and differed from its predecessor in a modified front end of the car. In terms of engines, the top was now occupied by a 192-horsepower 1.8-liter unit.

The Corolla E140 is the next generation of the super popular golf class car, which hit the assembly line in 2006. Russian drivers were able to choose between 1.4- and 1.6-liter petrol engines with 97 and 124 hp, with more powerful equipment paired with a robotic transmission. The restyling of the 10th generation has expanded the range of installations with a 1.3-liter version with 101 hp. (also on the market there were diesel modifications of 1.4, 2.0 and 2.2 liters). And since 2012, Toyota has been releasing the Corolla in the E170 generation, the 11th from the start of production of the model. The elegant car has become even more practical and reliable, while retaining the legendary economy and a variety of trim levels.

Generation E100 (1991 - 1998)

Engine Toyota 5A-F/FE/FHE 1.5 l. 105 HP

, 15W-40, 20W-50

Engine Toyota 4A-C/L/LC/ELU/F/FE/FHE/GE/GZE 1.6 l. 100, 105, 115 HP

What engine oil is poured from the factory (original): Synthetic 5W30
Oil consumption per 1000 km: up to 1000 ml.
When to change oil: 5000-10000

Engine Toyota 7A-FE 1.8 l. 105, 115, 118 HP

What engine oil is poured from the factory (original): Synthetic 5W30
Oil types (by viscosity): 5W-30, 10W-30, 15W-40, 20W-50
Oil consumption per 1000 km: up to 1000 ml.
When to change oil: 5000-10000

Generation E110 (1995 - 2002)

Engine Toyota 5A-F/FE/FHE 1.5 l. 100 HP

What engine oil is poured from the factory (original): Synthetic 5W30
Oil types (by viscosity): 5W-30, 10W-30, 15W-40, 20W-50
How many liters of oil in the engine (total volume): 3.0 liters.
Oil consumption per 1000 km: up to 1000 ml.
When to change oil: 5000-10000

Engine Toyota 4A-C/L/LC/ELU/F/FE/FHE/GE/GZE 1.6 l. 110, 115 HP

What engine oil is poured from the factory (original): Synthetic 5W30
Oil types (by viscosity): 5W-30, 10W-30, 15W-40, 20W-50
How many liters of engine oil (total): 3.0 (4A-FE, 4A-GE), 3.2 (4A-L/LC/F), 3.3 (4A-FE), 3.7 (4A-GE/GEL)
Oil consumption per 1000 km: up to 1000 ml.
When to change oil: 5000-10000