How to change a Ford Fusion oil filter. How to change the oil in a Ford Fusion engine with your own hands? Ford Fusion engine oil change video

Service:

Probably the most important question that torments every motorist is how often it is necessary to change the oil in a car engine. On the one hand, the best answer to this question - the more often - the better. On the other hand, the cost of good oil is never cheap, and the replacement process takes quite a long time. What interval should be considered ideal for oil change in ford fusion

At the moment, there is not a single master who can unequivocally say the correct oil change interval for engines, but there are many recommendations that can be followed to increase the life of the internal combustion engine.

Experienced car enthusiasts are well aware that the oil change period in Ford cars written in the service book does not always reflect reality. The most important factor in choosing the interval is the operating conditions of the car. In our country, it is worth highlighting the weather conditions, the condition of the road surface and the daily loads received by the car. It is also worth noting the main characteristics of the car. Cars assembled specifically for our country have the best performance.

The most reliable fact is the following thesis - good oil can be changed less often. But Ford Fusions are also susceptible to engine contamination, despite the fact that new expensive cars use engine oil with a minimum amount of contaminants.

To determine the oil change interval in your car, you must fulfill the following conditions: read the recommendations written in the service book, get their opinions from Ford car club forums, and compare real operating conditions with the conditions described in the service book. By doing this, you can determine for yourself the frequency oil change in ford fusion.

Oil change in Ford Fusion in SVAO

Mosavtoshiny car service, located at Serebryakova passage 4, offers the following services for changing oil and filters:

• full replacement of oil in the engine of the internal combustion engine on a Ford car with the removal of protection;
• express oil change through the dipstick;
• oil change on diesel vehicles;
• flushing the engine with special flushing oil before filling the main engine oil.

The cost of the basic service is displayed in the price list.

Ford Fusion engine oil is a vital necessity. Without lubrication, its parts will simply die. Replacement must be done regularly, every 10-15 thousand kilometers. With active operation, these figures correspond to a frequency of 2 times per year. You need to fill in only a quality product recommended by the manufacturer.

What kind of oil to pour into a Ford Fusion engine?

American brand engines use a product labeled 5W30. A specific brand should be chosen based on the recommendations of the car manufacturer.

How much oil to fill?

For a 1.2-1.4 liter engine, you will need 3.8 liters. For power units with a capacity of 1.6 liters, this value ranges between 3.8 and 4.25 liters, which depends on the modification.

Required tool

For the procedure you will need:

• Key for 13
• Filter wrench
• Keys for removing protection
• Mining container that you will drain

Don't forget to get a new oil filter. It must be replaced.

Ford Fusion engine oil change

Changing the oil is the main routine maintenance procedure at the dealer.

However, many car owners, especially older vehicles, prefer to do the procedure themselves.

There is nothing difficult in this.

• We drive the car into the pit.
• We warm up the engine, turn it off.
• Open the oil filler neck, cover it with clean (!) rags
• We get under the car
• If there is no special hole in the crankcase protection, remove it
• Carefully, so as not to pour out the working out on ourselves, slightly open the drain plug. As soon as it starts to drip, we substitute the bucket and continue to unscrew the bolt
• Let the oil drain. The process lasts more than one minute, so sitting in the pit is not necessary.
• When all the liquid has flowed out, we climb back in order to loosen the filter with a puller key, and then unscrew it by hand. The filter also contains oil, so you need to substitute a container under it.
• We are waiting for the last drops to flow out.
• We unpack the new filter, remove the protective caps.
• Pour about 300 g of the product into the filter, let it soak, then add oil.
• Dip your finger into the drained liquid and lubricate the filter gasket.
• We wind the filter and tighten it by hand.
• We tighten the drain bolt.
• Thoroughly wipe off all traces of oil
• Pour new oil through the neck, check the level in a minute.
• Start the car and let it run for about a minute.
• Wait 5 minutes after stopping the engine and check the oil level.
• Add oil if necessary.
• Check underneath for leaks. If there is, lifting the filter or bolt.

If the oil consumption during the service interval exceeds the stated norm, and there are no leaks, the engine should be diagnosed. On a new car, increased oil consumption is allowed while the parts “grind” to each other.

Changing the oil in a Ford Fusion engine is one of the most important and mandatory procedures for car maintenance. The fluid in the system has a direct effect on maintaining the driving characteristics of the vehicle. Timely replacement significantly improves the operation of the mechanisms inside the power unit.

When is it necessary to change the oil?

The oil change schedule according to the manufacturer's service book is once every 15 thousand kilometers. The frequency of replacement in Russian conditions is 4-10 thousand kilometers. However, when replacing, not only the driving characteristics and terms declared by the manufacturer should be taken into account, but also the following factors:

• Intensity of vehicle operation;
• Seasonality (whether the car is idle in the garage in the winter season);
• The technical condition of the power unit (new engine or already supported);
• Oil quality (recommended by the manufacturer or not).

What kind of oil to fill?

Many people wonder how to choose the right oil. The optimal choice and composition is recommended by the manufacturer.

• 14E8BA Ford Formula F 5W-30;
• 14E8B9 FORD Formula F 5W30.

The following lubricant may be in the form of similar brands: Total Quartz 9000 Future NFC 5W-30.

Oil change steps in a Ford Fusion 1.4 and 1.6 engine

Changing the oil in a Ford Fusion 1.4 and 1.6 engine is no different from each other. The only difference is the amount of lubricant being poured.

Before starting the procedure for changing the fluid in the power unit, it is necessary to prepare for work.

Need to buy:

1. Oil (original or popular brand). Recommended viscosity 5W30.
2. Oil filter.
3. A plug with a gasket on the crankcase.

Required tools:

• A 13 mm key to unscrew the drain bolt;
• Oil filter puller;
• A set of keys for removing the crankcase protection;
• Screwdriver and pliers (if necessary);
• Trough or bucket for draining waste fluid.

Step-by-step instructions for changing the oil in a Ford Fusion engine:

The Ford Fusion engine oil change process is complete.

Consequences of late replacement

Untimely oil change in the power unit negatively affects its resource. Operating a vehicle with low-quality fluid in the system will entail serious consequences.

The main ones are:

• Deteriorated vehicle dynamics;
• Increased fuel consumption;
• extraneous noise;
• Rotation of connecting rod bearings;
• Deterioration of the internal mechanisms of the engine.

In addition to poor-quality lubrication, wear of parts occurs due to oil starvation. For this reason, there is a sharp increase in the temperature of the internal elements, which further leads to their destruction. From time to time it is necessary to check the oil level in the engine. Top up if necessary and check condition.

Ford Fusion - refers to a number of subcompact vans produced by Ford Motor Company. The car received a base from the Ford Fiesta, was produced at the plant in Cologne, Germany. Not overpriced, good ground clearance, a spacious interior and increased safety, all this is about the Ford Fusion. Restyling in 2005 gave new moldings, modern lighting, other front and rear bumpers and of course a new dashboard design.

Car maintenance is a necessary task not only for the Fusion, but for any other car. By service, we mean a complete change of engine oil along with a cleaning filter. To do this, you do not need to go to the service of a specialist and pay him money for work that every average car enthusiast can do. After all, almost every person can drain the old oil, change the filter to a new one and fill in the new one within an hour, a maximum of two.

What kind of oil to pour and how much?

Fusion car owners often pour synthetic product with a viscosity of 5W-30.

Official dealers fill in the original Ford Castrol Magnatec Professional E 5W-20. The choice of a company is not fundamental, it means that it is not necessary to buy an original product and use only it. You can buy any more or less normal company on the market, Castrol, Lux Molly, Shell and others.

A complete oil change for Ford Fusion vehicles should be performed every 15,000 km or once a year. However, many motorists do this procedure a couple of thousand kilometers earlier, thereby saving the engine from black oil.

In addition to the fluid, do not forget to change the filter elements as well.

The amount of oil required depends on the configuration of the engine and its power. Thus, for a 1.4 engine, up to four liters are required, and for a 1.6 engine, more than 4 liters of new oil.

• 1.4 Duratec (FXJB, FXJC, FXJA) - 3.8 L
• 1.6 (FYJB, FYJA) - 4.1 L

Instruction

1. We warm up the engine to operating temperature. Cold oil has a low viscosity (fluidity). The warmer the liquid, the faster it drains. Our task is to grind off as much dirty, waste liquid as possible.
2. For easy access to the drain plug (and in some models the oil filter is also attached from the bottom) and the bottom of the car as a whole, you need to jack it up or drive into the inspection hole (the best option). Also, in some models, "protection" of the engine crankcase can be installed.
3. We open air access to the crankcase by unscrewing the filler cap and dipstick.
4. Substitutes a large container (equal to the amount of oil being poured).
5. We unscrew the drain plug with a key. Sometimes the drain plug is made like a conventional “bolt” with an open-end wrench, and sometimes it can be unscrewed with a four or hexagon. Do not forget to wear protective gloves, the oil will most likely wake up warm, but you need to be careful.
   
6. We wait about 10-15 minutes until the mining drains into a basin or a cut plastic canister.
7. An optional item but very effective! Flushing the engine with a special fluid is not included in the maintenance schedule and is not mandatory - but. A little confused, you will much better flush the engine from the old, black oil. At the same time, flushing with the old oil filter is carried out for 5-10 minutes. You will be surprised what black oil will pour out with this liquid. It is very easy to use this liquid. A detailed description must be included on the flush fluid label.
   
8. We replace the old filter with a new one. In some models, it is not the filter itself and the filter element that changes (usually yellow). Impregnation of the filter with new oil before installation is a mandatory procedure. Lack of oil in a new filter before starting the engine can cause oil starvation, which in turn can cause filter deformation. In general, this is not a good thing. Remember to also lubricate the rubber o-ring before installation.
   
9. Fill in new oil. After making sure that the drain plug is screwed on and a new oil filter is installed, we can start filling in new oil, guided by the dipstick. The level must be between the minimum and maximum marks. Also, you need to remember that after the first start of the engine, a little oil will go away and the level will drop.
   
10. In the future, when the engine is running, the oil level will probably change, be careful the first few days of operation. Recheck the oil level on the dipstick after the first start.

Video materials