- Quality classes: API SM/CF, ACEA A3/B4, ACEA C3
- Tolerances and approvals: VW 502 00, VW 505 00, MB 229.31, MB 229.51, BMW Longlife-04
--- messages are merged, Nov 4, 2014 ---
I dug deeper, it turns out that Suzuki, and other Japanese, do not have special oil tolerances, there are only such groups:
--- messages are merged, Nov 4, 2014 ---SUZUKI MOTOR OIL 0W-20
SUZUKI MOTOR OIL 0W-20 is an original high-quality energy-saving engine oil with improved environmental performance, specially designed for use in the lubrication system of atmospheric gasoline 4-stroke internal combustion engines installed on SUZUKI vehicles, for which the use of 0W-20 viscosity oil is recommended.
Produced on the basis of high-quality VHVI*** base oil with the addition of special organic molybdenum, which provides unique performance properties of the oil.
*** VHVI - Very High Viscosity Index (very high viscosity index).
Main characteristics:
- enhanced wear protection
- fuel savings due to reduced friction losses
SUZUKI MOTOR OIL 5W-30
SUZUKI MOTOR OIL 5W-30 is an original high-quality environmentally friendly engine oil specially designed for use in the lubrication system of atmospheric gasoline 4-stroke internal combustion engines installed on SUZUK vehicles for which the use of 5W-30 viscosity oil is recommended.
Produced from high-quality base oil from deep hydrocracking and catalytic dewaxing with the addition of an optimal composition of organic molybdenum, which provides excellent lubricity at high and low temperatures.
Main characteristics:
- enhanced wear protection
- stable operation in a wide temperature range
- stable oil film at elevated temperatures and critical loads
All engine oils from the SUZUKI MOTOR OIL range fully comply with API SM* and ILSAC GF-4** quality classes, are based on high-quality synthetic components and modern additive packages to ensure excellent engine performance throughout the entire service life.
* - API SM classification - classification by quality level in accordance with the standards developed by the American Petroleum Institute (API - American Petroleum Institute), is generally accepted and the most authoritative among motor oil manufacturers. In order to be assigned a particular quality level, the declared engine oil, in addition to meeting strict requirements, must successfully pass a series of long-term tests.
SM - the quality level for gasoline engines, introduced in November 2004 and is one of the highest.
** - ILSAC GF-4 - classification by quality level in accordance with the standards of the International Lubricants Standardization Approval Committee, characterizes the quality level of engine oil, and also indicates that the oil belongs to low-viscosity energy-saving motor oils.
The quality level of GF-4 is one of the highest today.
The use of non-genuine engine oil in SUZUKI engines may result in:
- to reduce the efficiency of the engine
- to reduce engine life
- to an increase in fuel consumption
- to increase the level of emissions into the atmosphere
--- messages are merged, Nov 4, 2014 ---
Here, according to CX4, the brand of oil is also determined by the number of wines:
JSAGYA21S00~
JSAGYB21S00~
JSAGYC21S00~ 100001-999999 0W-20
TSMEYA21S00~
TSMEYB21S00~100001-300000 5W-30
300001-999999 0W-20
Any car owner is interested in the longest possible operation of his car without extraordinary repairs. In order for the car to work optimally, its owner needs to update all consumables in a timely manner. These consumables include and. You can change it in a car service or on your own, in your own garage. The owners of the Suzuki SX4 are no exception. Let's figure out what kind of engine oil is needed for the Suzuki SX4 and how to change it yourself.
To change the engine oil in the Suzuki SX4, the manufacturer recommends using the original lubricant.
Scheduled engine oil change dates
Suzuki SX4 manufacturers have developed regulations for replacing lubricant in the engine. According to this regulation, it is necessary to change engine oil at least every 15,000 km. mileage or every 12 months. In the conditions of our unstable climate, poor quality of gasoline or engine oil that does not meet the necessary requirements, as well as under increased loads during operation, replacement intervals can be shortened and somewhat earlier than the scheduled period. Another reason for an unscheduled renewal of motor fluid is the purchase of a car "from hand". Having performed such work, the new owner of the car will be sure of the quality of the lubricant in the motor, and he will also have no doubts about the time for these routine maintenance.
Choosing the right oil
The durability and maximum performance of a car engine is ensured by the use of high-quality engine oil. Suzuki SX4 manufacturers strongly recommend that only original Motor Oil be poured into the engine. It refers to motor fluids of the so-called first or factory fill. The highest quality of this engine oil allows the engine to work as efficiently as possible. But the difficulty lies not only in the rather high price, but also in the fact that you can buy it only at specialized service centers, and the owners of the Suzuki SX4 often face the question of what kind of oil to fill in the engine if there is no original one. In addition to original oils, each engine has certain tolerances for the use of other lubricant mixtures. When choosing a motor fluid, you must carefully read them.
- Classification:
- by API - SG, SJ, SH, SL, SN, SM;
- according to ACEA - A5 / B5, A3 / B5, A3 / B3, A1 / B1;
- according to ILSAC - GF-3, GF - 4, GF - 5.
- Viscosity characteristics:
- recommended - 0W-20;
- permissible - 10W-40, 10W-30, 5W-30.
In most Suzuki SX4 car engines, 10W-40 semi-synthetics are recommended in the M16AWT engine, and 5W-40 diesel synthetics in the D19AA.
The volume of engine oil in the engine
How much oil is required for a Suzuki SX4 engine can be found by reading the car's service manual. If you have a 1.5 or 1.6-liter engine, then for a full change you need to prepare about 4 liters. For a 1.9 or 2-liter diesel engine, about 4.5 liters will be required.
Replacing the lubricant in the motor
Before proceeding directly, you need to prepare:
- engine oil, about 4 - 5 liters;
- tools;
- oil filter;
- a container for collecting waste liquid;
- tool for removing the oil filter;
- a funnel or any other device for conveniently pouring new liquid into a fairly small hole.
Before starting work, the engine should be warmed up a little. Warm waste fluid will drain much faster and more completely. Here you need to be careful - there is a risk of getting burned.
Nowadays, many large auto chemical stores have small workshops with them, where a service such as an engine oil change is available for free, but subject to the purchase of oil or a filter in their store. Often these parts are purchased separately, so you still have to pay for their replacement in a car service. That is why many motorists, given the simplicity of the procedure, prefer to do everything with their own hands. Consider this whole process on the example of a car Suzuki SX4 .
STEP-BY-STEP GUIDE
1) Before changing the oil in the engine, it is necessary to warm up the engine to operating temperature, and then let it cool down to about 60 degrees.2) First of all, we raise the car on a lift, overpass or pit, thereby ensuring free movement above the bottom of the car.
3) If there is protection at the pallet (mounted with 6 bolts for 10), it is required to remove it, opening access to the filter and drain cover.
4) After we install a container under the engine to collect used oil. It is important that the container holds at least five liters of liquid and has a significant neck diameter (preferably a 5-liter canister), otherwise the oil may get on the floor, ground or any other sensitive surface over which the car is located. Then we unscrew the oil drain bolt and wait for the liquid to completely drain from the engine.
5) Change the oil filter. To do this, you need a special filter remover, with it, the filter should be unscrewed counterclockwise. In the absence of this tool, an ordinary screwdriver or a metal pin will do, with which the filter can be pierced and rotated.
6) After all the oil has drained out, you need to prepare a new filter for installation. To do this, fill it with a small amount of new oil (up to 100 g), which we also use to lubricate the rubber filter seal.
7) Install the new oil filter in place, and then tighten the oil drain cap. IMPORTANT! In order to avoid thread breakage, it is not recommended to resort to excessive physical efforts..
9) Start the engine for a few minutes. During this time, we go down into the pit and use a dipstick to check the oil level, as well as the connections of the oil filter and the fluid drain cover for leaks. If everything is in order, then return the protection to its place.
HOW MUCH OIL SHOULD I PUT IN THE ENGINE?
How much oil should be poured into the Suzuki Vitara engine is described in the Maintenance Manual. So, for a 1.5-liter M15A engine, the oil volume is 3.9 liters; for 1.6-liter 9HX and M16AVVT - 3.85 and 3.9 liters, respectively; for a 1.9-liter D19AA engine - 4.5 liters; well, a 2-liter D20AA will need 4.4 liters of oil.OIL CHANGE INTERVAL
According to the regulations, the oil in the engine of the Suzuki SX4 and SX4 New models is changed every 15 thousand km or once a year. In addition, the frequency is influenced by the following factors:- technical conditions of the Suzuki SX4 engine;
- intensity of vehicle operation;
- winter or summer season
- the quality of the oil itself.
The primary indicator of engine oil change intervals in a Suzuki SX4 is the age of the car. If the car was purchased "from hand", then castling is best done as soon as possible from the moment of purchase. In the future, oil consumption, its level and condition should be kept under control. If the car is new, then the oil should be changed after a complete break-in.
The reduction in the oil change period in the Suzuki SX4 engine is affected by:
- poor quality of gasoline;
- frequent driving on uneven surfaces;
- weighting of the machine;
- frequent downtime.
WHAT ENGINE OIL TO USE?
The oil recommended for the Suzuki SX4 engine must have:1) Classifications:
API: SG, SH, SJ, SL, SM, SN
ACEA: A1/B1, A3/B3, A3/B4, A5/B5
ILSAC: GF-3, GF-4, GF-5
For the vast majority of Suzuki SX4 engine types, "Synthetics 5w30" is listed as the recommended oil. For the M16AVVT engine, in turn, "Semi-synthetics 10w40" is best suited, and for the D19AA engine - "Diesel synthetics 5w40".
When choosing an oil of one brand or another, the car owner must know that the parameters of the purchased oil should not differ from the requirements indicated above. It must also be remembered that it must be approved for use on the Suzuki SX4 and SX4 New engine. You can find it on the bottom of the label.
Suzuki Motor Corporation recommends that you use original brand oil of its production and be serviced by authorized dealers.
We will show you how to do a quick oil change in the engine of a Suzuki SX4 car with your own hands. To change the oil, it is best to use a viewing hole or a lift, if you do not have them, then you can do everything in the field, although it will be a little inconvenient.
Under the bottom of the car on the right side we see the engine tray, a little higher is the oil filter. The drain plug is located at the rear of the crankcase, unscrew it with a 17 key and substitute the container where the used oil will drain. Replace with a hot engine, in which case the used oil drains better.
The drain plug has a sealing ring, be sure to check its integrity, it may be slightly crushed or crushed, in which case it must be replaced:
Then we wipe the place where the cork is twisted so that no debris gets into the oil and twist it, you should not do this very much. Let's move on to the oil filter. It turned out to unscrew it with the help of the strength of the hands, first loosen it a little until the oil flows out, wait until it drains:
And then unscrew it completely. Be sure to wipe the contact area of the filter housing with a clean rag. It is not necessary to add oil to the new filter, just lubricate its o-ring:
We also twist it by hand, no special tool is needed. Now we fill in new oil, unscrew the oil filler neck under the hood, insert a funnel and pour oil. Specifically, in this example, it was possible to fill in 3.6 liters.
Video oil change in the Suzuki SX4 engine:
Backup video of how to change the oil in a Suzuki SX4 engine:
After how many kilometers should I change engine oil in a Suzuki SX4?
The technical regulations from Suzuki advise to replace at least 15 thousand km. run. From my own experience I can say that this is a lot, in Russian conditions it is necessary to change the oil at least once every 10 thousand km. run, ideally 7.5 thousand km. Only in this case your engine will serve you for many years.
What oil to fill in Suzuki SX4?
The manufacturer has left a large window for selection, buy filling oil according to the weather conditions in your area.
API classification - SG, SH, SJ, SL or SM
Viscosity - 0W-20, 5W-30, 10W-30, 10W-40
If you make a replacement at an authorized dealer, you need to bring 4 liters of engine oil with you (4.2 is poured according to the passport), I can say from my own practice that 3.8 liters fit into the engine during a normal replacement.
The Suzuki SX4 compact crossover was introduced in 2006. The first generation of the model was offered in versions with front or all-wheel drive, with hatchback or sedan body types. Depending on the region of sales, the cars were equipped with gasoline naturally aspirated engines of 1.5 - 2.0 liters with a capacity of 99 - 152 hp. or diesel engines for 1.3 - 2.0 liters and 90 - 135 hp. Since 2013, the second generation of the model has been produced, also known as the New SX4 and S-Cross. It is equipped with 1.0, 1.4 and 1.6 liter petrol engines, 1.3 and 1.6 DDiS turbodiesels, 5- and 6-speed manual gearboxes or CVTs. Suzuki SX4s are manufactured at facilities in Hungary, India and China.
ELF EVOLUTION 900 SXR 5W30
ELF recommends ELF EVOLUTION 900 SXR 5W30 as engine oil for first and second generation Suzuki SX4s requiring API SL/CF and ACEA A5/B5 lubricants. This oil is formulated using synthetic technology and guarantees a high degree of engine protection against wear and harmful deposits in any situation. It has increased energy efficiency, therefore, reduces friction losses during engine operation compared to conventional oil and contributes to fuel economy. Oxidation and thermal stability of ELF EVOLUTION 900 SXR 5W30 retains its performance even after prolonged use in harsh conditions.
ELF EVOLUTION 700 STI 10W40
ELF EVOLUTION 700 STI 10W40 is a semi-synthetic motor oil that meets API SN/CF and ACEA A3/B4 standards and is recommended for Suzuki SX4 that require oils of the corresponding standards. It is adapted for use in engines of various modifications, including diesel engines with direct injection, and provides reliable protection against wear in the most difficult driving conditions. Due to its wide range of viscosity indexes, this oil guarantees fast lubrication during cold starts, while maintaining sufficient oil film strength at high temperatures. The detergent-dispersant properties of ELF EVOLUTION 700 STI 10W40 oil keep engine parts clean, and its thermal and oxidative stability allows extended drain intervals (in accordance with the requirements of the automaker).
ELF EVOLUTION 900 NF 5W40
ELF EVOLUTION 900 NF 5W40 is a high-quality engine oil created using synthetic technology and designed for vehicles that operate in difficult conditions. ELF recommends using this oil in Suzuki SX4 engines requiring ACEA A3/B4 and API SL/CF oils. It effectively protects engine parts, especially the gas distribution mechanism, from wear during operation in extreme conditions, and therefore increases their service life. Cleaning additives in the oil prevent the formation of deposits and maintain the level of engine performance. The antioxidant properties of ELF EVOLUTION 900 NF 5W40 make it possible to use it with an extended replacement period.
ELF EVOLUTION 900 SXR 5W40
ELF EVOLUTION 900 SXR 5W40 is formulated with ELF synthetic technology and is recommended for second generation Suzuki SX4s requiring API SN/CF and ACEA A3/B4 engine oils. This oil effectively protects the engine from wear and deposits in all driving modes, including city and highway driving, sports, high-speed or off-road driving. Its high fluidity makes it easy to start the engine in low temperatures and guarantees lubrication from the first seconds. Oxidation resistance provides long-term stability of the characteristics of the ELF EVOLUTION 900 SXR 5W40 oil and allows you to adhere to the maximum service intervals prescribed by the automaker.
