Truck crane KS-6476 IVANOVETS based on the MZKT-69234 chassis with a lifting capacity of 50 tons
KS-6476 is a truck crane with a lifting capacity of 50,000 kilograms. It is used for loading and unloading and installation and construction works, and is also used in pre-assembly. In addition, he found application in dismantling the rubble of destroyed buildings, loading out of order equipment. This model is capable of being equipped with two types of counterweights, namely 4.6 and 13 tons. The counterweight is designed to balance the forces and moments acting in the truck crane and its parts. Thus, paying attention to the scheme provided on this page, you can decide on the mass of the counterweight, which would provide KS-6476 with those indicators that you would consider optimal.
Currently, construction is developing in the most unexpected places, where, as a rule, there are no convenient access roads, as well as an asphalt road (especially at the initial stage of construction). Truck crane KS-6476 mounted on a chassis specially designed for the installation and drive of crane equipment (with a lifting capacity of up to 50 tons) and their transportation on all types of roads. The wheel formula of the chassis is 8x4 - this implies the operation of the KS-6476 in the most difficult conditions. The chassis has a YaMZ-238DE2 power unit. Engine Specifications: Diesel, 4-stroke, V-8, turbocharged, liquid-cooled direct injection. This engine generates 330 horsepower, which provides the KS-6476 with excellent running performance.
On this model of the truck crane, the four-section telescopic arrow is established. It (and all working bodies) is driven by a hydraulic system. The hydraulics are powered by three pumps, which in turn are powered by three pumps driven by the chassis engine. The hydraulic drive provides ease and simplicity of crane control, as well as the smooth operation of all mechanisms, and most importantly, a wide range of operating speeds and a combination of crane operations are achieved.
In the basic configuration KS-6476 equipped with a set of devices and mechanisms that ensure the safe operation of the truck crane. Performing work operations on a truck crane requires full concentration of attention from the operator, in turn, KS-6476 allows, in the event of a situation when the crane has to work in cramped conditions, to limit the area of operation of the truck crane. The operator can first set the maximum angles of rotation of the cabin with the boom: on the one hand, the rotation of the boom is limited by the corner of the building, on the other hand, by a high lighting column. Next, limit the maximum outreach of the load from the axis of the slewing device of the truck crane and set the limit overturning moment when working on KS-6476 with retractable stops. Now you can work calmly, the automation will first let you know about the approach of the set mark, and then block the control when a critical indicator is reached. All this greatly facilitates work and reduces operator fatigue. Moreover, the boom is equipped with a device, without which the operation of truck cranes is prohibited today by the supervisory authorities for lifting mechanisms. We are talking about a mechanism that does not allow a dangerous supply of an arrow to power lines.
Articulated booms, which are a boom device, are widely used. KS-6476, consisting of the main boom and a jib hinged on it. Gusek, allows you to significantly increase the reach of the boom with a significant space under the boom, but with a reduced crane capacity.
If you decide to buy KS-6476, go to the "Contacts" section, where our phone number and email address are located. By calling us by phone, you are guaranteed to receive qualified advice from our managers. Managers will talk about the technical characteristics, additional advice, and also inform you about the procedure for the sale of KS-6476. If you decide to buy KS-6476 it is with us that we undertake to sell the KS-6476 at a relatively low price and deliver the equipment as soon as possible. We supply KS-6476 to all regions of Russia.
Truck crane KS-6476 Ivanovets, with a lifting capacity of 50 tons, is mounted on a special chassis of the MZKT-69234 (8 x 4) automobile type. The drive of the crane mechanisms is hydraulic from three pumps driven by the chassis engine. The hydraulic drive provides ease and simplicity of crane control, smooth operation of mechanisms, a wide range of operating speeds, the combination of crane operations. The boom is a telescopic four-section. The first retractable section is telescoped by one hydraulic cylinder, and the second and third sections are extended synchronously by another hydraulic cylinder and a rope block. To increase the space under the boom, a light lattice boom extension (jib) is supplied by special order. A microprocessor-based load limiter with digital information display allows you to monitor the degree of loading of the crane, the length and reach of the boom, the height of the boom head; shows the actual value of the load on the hook and the maximum load capacity at a given reach, and also automatically limits the crane’s coverage area according to the specified coordinates when working in cramped conditions. throughout the entire service life. Truck crane KS-6476 in the basic configuration it is equipped with a new crane operator's cab. As an additional option, it is possible to install a mechanism for raising / lowering the cab.
Rent of a truck crane 50 tons with a boom length from 11.4 to 34 meters (KS-6476) on a special chassis for assembly, construction and loading and unloading works in St. Petersburg and the Leningrad region.
* - when the equipment is operated outside St. Petersburg, the cost of work and delivery is negotiated additionally. This truck crane is rented for a period not less than a shift.
Mobile crane KS-6476 maximum load capacity 50 tons designed on a special automobile-type chassis MZKT-6923, and is designed for construction and installation and loading and unloading operations. The cargo lifting mechanism has two structurally identical cargo winches - main and auxiliary. The main winch carries out the main lifting, the auxiliary winch is used to work with hook suspensions of uncontrolled jibs, and with tower-boom equipment it drives the controlled jib through the control block.
The drive mechanisms for lifting the load and turning is carried out by axial piston pumps; the mechanisms for lifting, lowering the boom and extending-retracting its sections are driven by double-acting hydraulic cylinders. Crane equipment hydraulic motors are powered by axial piston pumps driven by an internal combustion engine. The pumps develop pressure in the hydraulic system up to 26 MPa.
Jib KS-6476- telescopic four-section. The length of the boom is 11.4 - 34.0 m, with an extension - 48.5 m. The extension of the sections is carried out by double-acting hydraulic cylinders. The first retractable section is telescoped by one hydraulic cylinder, and the second and third sections are extended synchronously by another hydraulic cylinder and a rope block. To increase the space under the boom, a light lattice boom extension (gooseneck) is supplied by special order.
