Loader MKSM-800 has gained popularity in Russia, as it is known for its ability to perform various tasks, its small size, simple operation and maintenance, as well as reasonable price and economy in the workflow. This machine, along with other civil and military equipment, is produced by one of the largest Russian manufacturers - the Kurgan Machine Plant.
The MSKM-800 mini loader is used in all cases where strength and maneuverability are needed at the same time: in industrial processes and during construction work, when loading or unloading, it is used by utilities and various households, up to closed small spaces.
Navigation
The small size and maneuverability of the MSKM-800 loader should be mentioned separately, since these are its qualities that are especially attractive when it is necessary to work in small or covered areas where the use of large equipment is impossible or considered irrational.
Peculiarities
How is the abbreviation MKSM deciphered? It stands for: "Multipurpose Utility Construction Machine." The number 800 included in the name of the model indicates the carrying capacity, the limiting capabilities of this technique.
In addition to the bucket, the basic loading equipment, about twenty other devices and auxiliary parts can be installed on the MKSM mini loader. Such a transformation is carried out quite quickly, the new equipment is connected to the hydraulic system of the machine and is immediately ready for operation. With such a complete set of accessories, this mini loader has gained a reputation as a multifunctional machine.
The equipment is easy to maneuver and easy to control, smooth running, as well as an almost complete turn around its axis, the machine provides a volumetric hydraulic drive and two onboard continuously variable gearboxes.
The control of the machine itself, as well as attachments for loading equipment, is carried out by the driver-operator from the cab. In it, for control, there are a pair of joystick levers equipped with a mechanical and electrical drive.
The operator cabin is designed for comfortable work at different times of the year and in different conditions: an almost all-round view allows the operator to control the situation around during the work process, and the cabin heating and air conditioning system make the machine suitable for year-round use.
Under bad road conditions (off-road, viscous deep mud, etc.), rubber-metal caterpillars provided by the design can be installed on the wheels of the machine directly from above. Thus, the machine evenly distributes the load on the ground and increases its traction and traction.
The small size and weight of this loader model make it possible, if necessary, to deliver it to the place of the forthcoming work using other large-sized trucks.
Technical specifications
Engine Specifications
MKSM loaders are equipped with various diesel engines imported from the USA, Japan and Germany. They vary in power, have a different cooling system and a different number of cylinders. All these differences determine the modification of the loader.
Performance characteristics
MKSM loaders, regardless of the subspecies of the model, have a bucket in their arsenal and have the same carrying capacity, however, the method of controlling the hydraulic system, the speed of the machine and the traction force of the loader vary depending on the modification.
| Options |
MKSM modifications |
||||
| 800 | 800k | 800H | 800A | 800A-1 | |
| Max. travel speed, km/h | 10 | 18 | 12 | ||
| Max. weight of the lifted load, tons | 0.8 | ||||
| Max traction force, kN | 24 | 21 | 28 | 25 | 27 |
| Base bucket capacity, m 3 | 0.46 | ||||
| Base bucket width, cm | 173.0 | ||||
| Max. bucket dumping height, m | 2.41 | ||||
| Max. boom reach, cm | 64.0 | ||||
| Drive unit | mechanical | electric | mechanical | ||
Types of attachments
The main loading bucket, which is equipped with all types of MKSM loader, is easily replaced by any other attachments in the arsenal of this mini-machine, namely:
Mining bucket. For work with non-flowing and coarse-grained materials (crushed stone, stones, construction waste, etc.), and has a bucket volume of almost 0.5 cubic meters and a width of 173 cm. Equipped with special teeth on the edge.
Dozer swivel blade. It is used for cleaning winter roads from snow, sites from debris, for leveling the soil, filling and leveling pits. Its width is 220 cm.
Bucket excavator. It is used for excavation of a soil layer of small sizes: trenches, pits, ditches, etc. Its capacity is 0.08 cubic meters, it raises to a height of 2 meters and deepens to a depth of 2.4 meters.
trench excavator. It has a narrower specialization than the previous one, and is used to dig trenches necessary for laying cables, pipes and other communication nodes. It digs a trench with a maximum depth of 1 m, its width is 0.16 m, it works at a speed of 3.8 m/h.
cargo forks. They are used during the storage of any stackable goods, for example, wooden pallets with construction or other goods while working in a warehouse, construction site or in terminals. The grip width varies from 23 cm to more than one and a half meters, and lifts to a height of 3.06 m.
Clamping forks. They are used for collection, loading and local movement of oversized and lengthy waste, for example, construction waste (boards, beams, etc.), tree branches, bales or stacks of hay and straw, etc. They capture 162 cm and raise to a height of 3.01 m.
cargo pin. Used to move or load rolled materials: paper, wire, textiles, etc. The pin is 98 cm long and rises to a height of 3 m.
cargo boom. With the same technical data as the pin, it is used for loading and unloading, lifting or transporting especially heavy loads (up to 800 kg), a lifting hook is used to complete the task.
Drilling equipment. It is used for drilling wells in the ground, with different diameters and depths (20-40 cm in diameter and up to 2 m deep), which can be used for a wide variety of works: from landscaping sites to the installation of foundations and supports.
hydraulic hammer. Used for crushing. With an impact force of 480 J, it breaks rocks and stones, concrete slabs and old asphalt, etc.
travel brush. Street cleaning. The tank contains 200 liters of water and the brush covers 155 cm of surface.
harvester. Performs similar functions as a brush, but without the use of water and with the ability to reach hard-to-reach places, such as curb lines, fences, etc. Capturing the site during cleaning - 2 m.
Hopper spreader. It is used for sprinkling slippery roads. The volume of the bunker is 0.4 cubic meters, it scatters at a distance of 3-16 m.
Milling rotary snow blower. Cleans and discards the snow cover from the treated surface. Captures 172 cm and throws 5 m away.
concrete mixer. It is used for mixing concrete mixtures directly on the construction site. Volume - 250 l.
Ripper. It is used during sowing, when landscaping lawns, when planning compacted soil as a preparation, etc.
The multi-purpose utility construction machine MKSM is one of the leaders in sales in its segment, because technical characteristics, durability and performance of these machines are at a high level, and for many years of using MKSM machines, users have been able to verify the reliability and durability of this model.
Scope of application of multi-purpose utility construction machines MKSM
Extremely wide: from small plots to industrial zones. The design features of these machines allow you to smoothly change their speed and direction of movement, turn around their own axis. MKSM are most in demand in construction organizations, at enterprises of housing and communal services, road facilities, industry and the transport industry. The popularity of this technique is explained by its combination of its versatility, which makes it possible to mechanize almost all utility, transport, construction, loading and earthmoving operations, compactness and high maneuverability, which allows organizing work in cramped conditions (in narrow aisles, enclosed spaces, on courtyard areas), where overall restrictions make the use of conventional techniques impossible.
The overall dimensions of the MKSM make it possible to penetrate even into openings 2.1 m high and 1.8 m wide. MKSM is ideal for maintenance of sidewalks, footpaths, alleys, markets, utility lines, road maintenance and landscaping.
In addition, the temperature range of operation of MKSM from -40 to +45, satisfies the needs of consumers in all climatic zones of Russia. MKSM models are equipped with modern diesel engines that comply with European environmental standards. With regard to all modifications of the MKSM, the basic principle is preserved - ensuring maximum versatility of equipment, i.e. applicability in all major market segments, including by maintaining a wide range of quick-detachable attachments.
At the request of consumers, a set of attachments is supplied to MKSM: for loading (various buckets, forks and other equipment), harvesting (brush, blade, snow plow, etc.), earthmoving (drilling, excavation equipment), construction (concrete mixer) and others works, including on soils with low bearing capacity (in case of installation on the MKSM of a set of metal caterpillars that increase the traction and coupling properties of the machine).
At the same time, it takes little time to replace the working equipment - the equipment is equipped with a quick-action clamp that allows the operator to change equipment independently and without the use of additional tools.
Characteristics of MKSM
| MKSM 800N | MKSM 800K | MKSM 1000 | |||
|---|---|---|---|---|---|
| Engine | |||||
| Model | HATZ 2M41 | HATZ 2M41 | HATZ 3M41 | CAMMINS A2300 | HATZ 3M41 |
| engine's type | diesel, four stroke 2 cylinder |
diesel, four-stroke 3-cylinder | diesel, four stroke | diesel, four stroke 3 cylinder |
|
| Cooling system | aerial | aerial | water | aerial | |
| Rated power, kW (hp) | 27 (36) | 27 (36) | 36,8 (50) | 33 (44) | 36,8 (50) |
| Specific fuel consumption, g/kWh (g/hp.h) | 220 (161,8) | 220 (161,8) | 220 (161,8) | 253 (186) | 220 (161,8) |
| Fuel tank, l | 50 | 50 | 50 | 50 | 50 |
| Preheater | auto | auto | auto | ||
| Performance characteristics | |||||
| Maximum load capacity, kg | 550 | 650 | 800 | 990 | |
| Maximum travel speed, km/h | 10 | 10 | 10 | 10 | |
| Climbability, hail, no more | 13 | 13 | 13 | ||
| heater | autonomous | autonomous dependent | autonomous | ||
| Overall dimensions, weight | |||||
| Length with main bucket, mm | 3200 | 3200 | 3270 | 3270 | |
| Machine width with tires, mm | 1400 | 1400 | 1680 | 1680 | |
| Track width, no more than, mm | 1180 | 1180 | 1410 | 1410 | |
| Machine height by flashing light, mm | 2200 | 2200 | 2215 | 2215 | |
| Ground clearance, not less than, mm | 200 | 200 | 206 | 206 | |
| Operating weight with main bucket, mm | 2400 | 2400 | 2800 | 3400 | |
Attached equipment for MKSM for loading operations
Main bucket. Designed for loading and moving various cargoes - fertilizers, bulk materials (sawdust, shavings), snow, various types of soil. In addition, the bucket can be used as a blade for moving and leveling the soil.
Arrow cargo. It is used for lifting, moving, loading and transporting bulky goods.
Cargo pin. It is used for moving, loading and transporting bulky goods (paper rolls, coils of wire, pipes).
Clamp forks. They are used in construction, agriculture, in the arrangement of gardens, parks and other sectors of the economy. They can be used when loading chopped shrubs, sawn trunks, branches, when working with straw, hay, silage, manure, scrap metal, rubble, pipes, waste materials and other long loads.
Fork cargo. Used for transportation, warehousing and other cargo operations performed with stacked goods, boxes, pallets and other materials that can be stacked. Forks are used incl. in warehouses and customs terminals.
Attached equipment MKSM for public works
Blade rotary. Designed for moving (raking and distributing) various materials during territory planning, for removing rock and various granular and piece materials from sites, for backfilling trenches, as well as for cleaning the road from debris.
harvester. It is used for municipal work when cleaning industrial premises, courtyards, sidewalks, footpaths and other hard-surfaced areas from debris, as well as for collecting dust, sand, and dirt.
Road brush. It is used for cleaning and sweeping footpaths, squares, roads, sidewalks, yards and other areas with a hard surface.
snow plow. Designed for cleaning freshly fallen and packed snow.
Spreader of anti-icing materials. It is intended for processing roads, streets, squares, airfields and other territories with special anti-ice materials.
Equipment for MKSM for land works
Trench excavator. Designed for digging rectangular trenches in soils: light sandy clay, vegetable soil, peat, wet sand, fine gravel.
Bucket excavator. Designed for digging holes, ditches, trenches in soils: light sandy clay, vegetable soil, peat, wet sand, fine gravel.
Ripper. Designed for loosening heavy dense soils, including: clay, loam, cobblestone, frozen sand.
Drilling equipment. Designed for drilling wells with a diameter of 200, 300 and 400 mm in non-frozen soils of categories 1-4 (clay, vegetable soil, peat, wet sand, fine gravel).
Attached equipment for construction work
concrete mixer. Designed for the preparation of mobile concrete mixtures at various construction sites with a small amount of work at an ambient temperature of at least 5 ° C
Frontal mini loader MKSM-800 is a special unit that performs multiple functions in the municipal construction industry. The main types of work include: planning the area for construction, loading and unloading various bulk materials, drilling, forming trenches and recesses in the ground, snow removal in winter, as well as performing simple work in warehouses.
The multi-purpose loader MKSM-800 is produced by the Chetra group of companies. It gained its popularity on the market due to its relatively small size (compared to competitors) and the performance of many simple, quick and necessary tasks in construction and utilities, where often large-sized equipment cannot be used for its intended purpose.
Overview of the loader MKSM-800
Description
This type of equipment, as we wrote earlier, refers to multi-purpose special-purpose equipment due to the large number of interchangeable equipment that is used to perform various tasks.
It is useful to know that the replacement of attachments on a skid steer can be done even by one operator, because the replacement process is quite simple and does not require special technical knowledge from the operating personnel. Moreover, the replacement of equipment is carried out in a short period of time, which is highly appreciated in the production of works!
MKSM-800 for organizations and entrepreneurs is an excellent option for performing work in "compressed" overall conditions. There will always be work for this type of equipment, which means that the loader will pay off very quickly, which is very, very profitable. I would also like to note that the cost of work performed using small-sized MKSM is much lower compared to other equipment.
Main features of the loader
The considered version of the equipment is deployed literally on the spot and, by means of the Chetra engineers included in the list of equipment, a volumetric hydraulic drive with stepless speed switching smoothly picks up and slows down. Management is carried out by means of two joysticks, which is quite simple!
Compared to competitors' analogues (CASE 410 and Lui Gong 365A), the considered version has pronounced distinctive features and features. Let's highlight some of them:
- A quality engine from John Deere or Hatz, which is very attractive to us.
- Higher cross-country ability and controllability of even a standard chassis.
- Developed and installed volumetric hydraulic drive (we wrote about it a little higher).
- Convenient location, and hence the use of controls.
- Maintenance, daily inspection and repair is much easier due to the design features.
Varieties
Today on the market there are not only standard models MKSM-800, but also some of their modifications with a variety of applications of the main components and assemblies. Let's describe each of them in more detail.
Model MKSM-800A has a welded frame and a special clutch is installed for work at low ambient temperatures.
Model MKSM-800K - is equipped only with a diesel power unit of the American company John Deere, in rare cases, Cummins.
Model MKSM-800N - is equipped only with a diesel unit of the German company Hatz.
The MKSM-800A-1 model is the latest fresh modification with the use of pneumatic wheels and tubeless tires, as well as an improved chassis suspension.
Main technical characteristics of MKSM-800
The mini-loader, depending on the modification, is equipped with a diesel power unit, which has a specific diesel fuel consumption of 161.8 g / hp. per hour or 220 g/kWh, which is quite economical. The upper limit of the maximum speed is 10 km / h. The fuel tank attached to the chassis holds 55 liters of diesel fuel. The main overall characteristics are shown in the figure below.
Other characteristics of the considered model are shown in the table below.
| Characteristic | Index |
|---|---|
| Total weight, t | 2,8 |
| Maximum load capacity, t | 0,8 |
| Maximum speed, km/h | 10 |
| engine's type | Diesel |
| Power unit power, hp/kW | 46,2/34 |
| Fuel consumption per hour, g / hp h or g / kWh | 161,8/220 |
| Maximum pulling force, kH | 24 |
| Transmission | Hydromechanical |
| Chassis type | Wheeled |
| Tank volume, l | 55 |
| Track width, m | 1,41 |
| Unit length, m | 2,48 |
| Unit height, m | 2,065 |
| Control type | Mechanical or electrical |
How much does the MKSM-800 loader and its analogues cost?
Price loader MKSM-800 varies from 1 to 1.3 million rubles, depending on the choice of attachment equipment. The closest analogue - CASE-420 will cost you about the same amount of money. Naturally, we consider the price category for used equipment.
We hope our brief review has allowed you to draw the conclusions you need, stay with us, there is still a lot of diverse material ahead and good luck!
Loader MKSM-800 is a special equipment that is used in warehouses, public utilities, construction sites. Depending on which attachments will be used, such a loader will perform the tasks.
Device
The device has small dimensions, so it can be easily transported by truck from one object to another. Due to its small size, the maneuverable Chetra loader can drive into the premises through the entrance gate with a height of 2.1 m and a width of 1.8 m. .
Also, the loader is used for loading materials, planning economic areas, drilling recesses, creating trenches, clearing snow, and transporting small loads.
Loader MKSM-800 is manufactured by Chetra. The machine has high working speed and excellent performance.
Chetra front loaders have the following advantages:
- high permeability;
- excellent handling;
- high-tech diesel engine;
- ease of maintenance and repair;
- improved hydraulic drive;
- upgraded control buttons.
The machines are equipped with hydraulic systems from various manufacturers. The device is universal, it can work with various types of attachments, such as a blade, snow plow, road brush, etc. Equipment can be changed quickly by pressing the clip. It does not require the use of tools.
The front-end loader MKSM 800 is equipped with an all-metal operator's cab. The cabin is fixed on the frame by means of swivel joints. It leans back when diagnosing and servicing the mechanism components. The door is located in front of the cab, there are clothes hangers on the side walls. In the middle of the cab there is a chair that can be moved forward and backward by means of springs. All control units, indicators and control devices are located in the cab.
There is a container for tools. The front glass is large and provides good visibility. The rear window is an emergency exit, on the side there are glasses equipped with vents. The cabin is equipped with thermal insulation and a heating system that creates the desired temperature. The safety of the tractor driver is ensured by a belt, an arc, protective grilles and the possibility of fixing the door. Spare parts for the unit can be bought in stores.
See » Classification and technical characteristics of popular types of loaders
Specifications
The loader MKSM-800, the technical characteristics of which are available in the operating instructions, is equipped with a powerful diesel engine with a specific fuel consumption of 220 g/kW.
Loader parameters:
- The speed of the car is 10 km/h.
- The fuel tank has a volume of 55 liters.
- The overall dimensions of the device are 2065x2480x1680 mm.
- Ground clearance is 206 mm.
- Weight - 2800 kg.
- Load capacity - 800 kg.
- The smallest turning radius with bucket is 2440 mm.
- The maximum traction force is 24 kN.
There is a basic model MKSM-800 and several modifications: 800A, 800K, 800N. They differ in engine power, the design of some components and other indicators. Bucket loading duty cycle is 12 seconds.
Hydraulic system pressure: chassis - 350 MPa, working equipment - 200 MPa. Hydraulic system performance: running gear - 49 l/min, working equipment - 70 l/min, working equipment with a pump - 110 l/min. The maximum slope when working with a load is 12º. The highest tipping load is 16,000 N.
Engine parameters
The MKSM loader has a power unit capacity of 48 hp. The machine is equipped with a Cummins A2300 diesel four-stroke engine. The internal combustion engine has 4 cylinders and a liquid cooling system. Fuel consumption is 186 g/hp. The highest crankshaft speed is 2800 rpm. The lowest idle speed is 800 rpm.
Performance characteristics
All loader models are equipped with a standard loading bucket, have the same lifting capacity and differ from each other in tractive force, travel speed and hydraulic system adjustment. A distinctive feature of the A and A-1 models is a reinforced frame with final drives on a chain drive and a hydraulic speed drive.
Dimensions and weight
Chetra loader of various models has the same overall dimensions and weight, except for MKSM-800A. If we compare the parameters of the models MKSM 800, 800K, 800N, 800A, 800A-1, then the track width is:
- for models 800, 800K and 800H - 141 cm;
- 800A - 145 cm;
- 800A - 1 141 cm.
See » Technical characteristics of the Chinese wheel loader Lonking (Lonking)
Ground clearance for all models is 20.6 cm.
The length of models 800, 800K, 800H is 248 cm; models 800A - 264.5 cm; 800A-1 - 248 cm. The width of models 800, 800K, 800H is 168 cm; 800A - 172 cm; 800A - 1,168 cm. Height 800, 800K, 800H - 206.5 cm; 800A - 205.5 cm; 800A-1 - 206.5 cm. The total weight is 2.8 tons for models 800, 800K, 800N. For 800A - 3.1 tons. For 800A-1 - 2.8 tons.
Removable work equipment
Loader MKSM 1000N and MKSM 800 can have various types of removable equipment. For the Chetra loader, the following can be used: a mining bucket with a volume of 0.46 m³ and a width of 173 cm. The bucket is equipped with teeth on the cutting edge. It is used for loading ground materials: crushed stone, crushed stone, etc.
The blade has a width of 220 cm and provides clearing of roads and sites from snow and debris. By means of a rotary dump it is possible to fill up trenches, to carry out planning of the territory.
Cargo forks have a grip width of 23 to 155 cm and an unloading height of 3 m. The forks are used to move containers with building materials and equipment in warehouses and construction sites. Forks with a grip of 162 cm and a lifting height of 3 m are used to move branches of sawn trees, straw, construction waste. The pin has a lifting height of 3 m and a length of 98 cm. It is designed for the movement of rolled goods (paper, wire, rope, etc.).
The boom has a lifting height of 3 m, a length of 98 cm and is designed to lift heavy loads up to 800 kg with a hook. The drilling equipment is designed for drilling wells in the ground with a diameter of 20-40 cm and a depth of 1.5-2 m.
See » TOP-6 loaders of the Dalian lineup and their technical characteristics
The hydraulic hammer has an impact power of 480 J and is used for crushing stone, rock, concrete and asphalt. The travel brush has a 155cm grip and a 200L water tank. With the help of such equipment, it is possible to water and sweep streets, sidewalks, playgrounds and squares with a hard surface.
The 2 m wide sweeper sweeps roads and grounds, as well as the territory in hard-to-reach places, such as paths near fences, curbs.
RPM-4 is a spreader with a 0.4 m³ bunker. He sprinkles roads covered with ice with special anti-icing materials. The width of the treated surface is from 3 to 15 m.
The Chetra snow blower has a working width of 172 cm and a throwing range of up to 5 m. It is used to clear snow from roads, squares and other areas.
The concrete mixer has a volume of 250 l, prepares the concrete mixture at the construction site.
A ripper with an immersion depth of 24 cm and a working width of 90 cm is mounted on the rear suspension. It is used for loosening the soil in the fields before sowing, in park areas.
Designed for loading and moving soil, loose rocks, lumpy materials, planning terrain, cleaning areas from snow and debris, for transport and storage work with piece cargo, digging holes and trenches, drilling wells, preparing mobile concrete mixes and other works using corresponding replacement attachments, incl. on soils with low bearing capacity.
MKSM-800 It is used in industry, construction, municipal and road services and in other industries, where, due to cramped working conditions or for economic reasons, it is impossible or unprofitable to use conventional large-sized equipment.
The compactness and high maneuverability of the machine allow it to be used in cramped conditions. dimensions MKSM-800 allow to penetrate even into openings 2.1 m high and 1.8 m wide. MKSM-800 ideal for sidewalks, footpaths, alleys, markets, utility lines, road maintenance and landscaping. Small overall dimensions and weight MKSM-800 make it easy to transport in a truck or trailer. Wherein MKSM-800 can move between work areas under its own power.
MKSM-800 smoothly changes the speed and direction of movement, turns on the spot due to an independent stepless change in the speed of rotation of the right and left gearboxes by a volumetric hydraulic drive.
Comfort and ease of operation is ensured by two mounted joystick servo handles, ergonomically integrated into the side panels.
The wide cab entry and anti-slip footplate make it easy and safe for the operator to get in and out of the work area.
The low position of the hood and the high degree of glazing of the cab provide good visibility, allowing you to see the entire working area. Installed rear-view mirrors make it possible to view the space behind the car and prevent hitting an obstacle when reversing.
Special attention designers MKSM-800 paid attention to the ease of maintenance of the machine. Maintenance points are grouped in easy-to-access locations to keep maintenance costs down MKSM-800 to a minimum. So, for example, by simply opening the rear hood, you can get access to the engine and its units, and to access the hydraulic system, it is enough to tilt and fix the cab. Also for servicing the hydraulic system in the car there is a removable hatch from below.
However, the main feature MKSM-800 What distinguishes it from other technical means is the versatility of this machine, which is achieved by using seventeen types of quick-change attachments that are used in a wide range of jobs. Moreover, the MKSM operator himself can change the hinges without outside help in just a few minutes. At the same time, the hydraulic systems of the machine and attachments are connected through a quick-release coupling without draining the working fluid from the hydraulic system and, therefore, without getting dust, dirt and abrasive into it.
| MKSM-800 | MKSM-800U | MKSM-800N | |
|---|---|---|---|
| Engine | |||
| Model | ZETOR 5201.22 (Slovakia) |
JOHN DEERE 3029DF120 (USA-France) |
HATZ 3M41 (Germany) |
| engine's type | diesel, four-stroke, 3-cylinder | ||
| Cooling system | liquid | aerial | |
| Rated power, kW (hp) | 34 (46) | 36 (48) | 38,9 (52,9) |
| Specific fuel consumption, g/kWh (g/hp.h) | 242 (177) | 227 (167) | 220 (161,8) |
| Fuel tank, l | 55 | ||
| Preheater | - | semi-automatic | auto |
| Performance characteristics | |||
| Maximum load capacity, kg | 800 | ||
| Maximum speed, km/h | 10 | ||
| Maximum traction force, kN | 24 | ||
| Minimum turning radius with main bucket, mm | 2440 | ||
| Maximum unloading height at maximum unloading angle (37º), mm | 2410 | ||
| Maximum height of the bucket suspension point, mm | 3060 | ||
| Climbability, degrees, no more | 13 | ||
| Allowed to work on a slope, degrees | |||
| - when working with loads weighing up to 750 kg | to 10 | ||
| - when working with loads weighing from 750 to 800 kg | up to 5 | ||
| heater | combined with cooling system | autonomous | |
| Operating temperature range | from –30 to +30ºС | from -20 to +50ºС | from -40 to +45ºС |
| Dimensions and weight | |||
| Machine length with main bucket, mm | 3270 | ||
| Machine length without bucket, mm | 2480 | ||
| Machine width with tires, mm | 1680 | ||
| Track width, no more than, mm | 1410 | ||
| Machine height, mm | 2065 | ||
| Height of the machine along the fan-dust separator, mm | 2200 | ||
| Machine height by flashing light, mm | 2215 | ||
| Maximum machine height with raised bucket, mm | 3700 | ||
| Maximum height at maximum dumping angle (37º), mm | 2410 | ||
| Ground clearance, not less than, mm | 206 | ||
| Operating weight with main bucket, kg | 2800+2,5% | ||
In addition to the differences in the engines installed on the MKSM listed in the table, the following can be noted.
MKSM-800 with Zetor engine, hydraulics MKRN (Kovrov) or GST-33 (Pargolovo, Salavat)
MKSM-800 with the Zetor engine has been produced for more than 10 years. Russian and foreign consumers in practice got acquainted with the high quality and reliability of this modification MKSM-800. The resource of the installed Zetor 5201.22 engine is 5000 hours.
MKSM-800 with John Deere engine
MKSM-800 with an American John Deere engine, it is especially effective when operating in dry and hot climates. The cooling system used in the machine allows you to operate MKSM-800 in the temperature range from -20 to +50? The resource of this engine is 8000 hours.
This modification is currently MKSM-800 made to order.
MKSM-800 with Hatz engine, GST-33 hydraulics (Pargolovo, Salavat)
Modification MKSM-800 with a German Hatz engine, it has a significant resource before the first overhaul - 18,000 hours. Air cooling of the engine does not require the use of special liquids and the installation of radiators. In addition, the frequency of maintenance for MKSM-800 with this engine more (compared to other modifications of the machine), so the operating costs of customers are less. Service and repair MKSM-800 with a German engine it is more convenient than other modifications, thanks to a significant improvement in access to the engine compartment of the car. It should also be noted that a characteristic feature of the Hatz 3M41 engine is automatic protection against violations of operating conditions (automatic engine stop when the belt breaks, when the oil pressure drops in the oil lubrication system). The Hatz 3M41 engine complies with the European requirements of UNECE Regulation No. 24-03 regarding "smoke".
