How to remove a dent in a car - that's what many car owners ask on thematic forums, who accidentally hit a fence or garage door while parking. Well, there are plenty of ways, and they are all quite affordable.
How to remove a dent in a car in 3 easy steps
No one is immune from the appearance of minor defects on the car body. A pebble that accidentally flew out from under the wheels, a children's scooter that unsuccessfully drove into a car standing at the entrance, the carelessness of other drivers - but you never know what can happen! The problem is solved using the following tools:
- hammer with a rubberized shock part;
- any rag or cloth;
- a block of wood;
So, the dent is found, the tools are at the ready. Step one: on the inside, very carefully with a rubber mallet (it is also called a mallet), we level the dent - with very light taps. The dent is too deep and the rubber can't handle it? This is where a piece of wood comes in handy!
The second step is to wrap a piece of wood in a rag, apply it to the damaged area and continue to work with a hammer until the dent is smoothed out.
Step three - it is needed if the dent was too deep, and the paintwork was also damaged. In this case, the unevenness is first eliminated with a bar wrapped in rags and a hammer. Then you need to walk along the outside with fine sandpaper to erase all scratches and bumps. Then the entire surface that has undergone repair must be puttied with a special compound, let it dry. And finish with paint.
How to remove a dent with tools
Even our grandfathers repaired the car body with hammers and blocks. And now there are special technologies that allow you to effortlessly align dents on a car in a matter of minutes.
In online stores you can buy special devices with vacuum suction cups. It affects the metal under high temperatures with a stream of compressed air. Any dents and bumps disappear without a trace - checked.
Other ways to remove dents from the body
If the recesses are shallow and combined with scratches, the trouble can be solved with the help of sandpaper and putty again. The only point that can become problematic is to evenly apply a new layer of paintwork, so that it does not look like a stain on the body. Here, even if we are talking about minor damage, it makes sense to turn to professionals. You don't want to drive around in patched cars!
Another way to level the surface of a dented body is by heating and cooling the metal. For the best effect, it is recommended to carry out straightening, using special tools for this.
The metal pulling method is also very effective. This is done using levers of various lengths. You can buy a universal set in a car shop.
As you can see, there really are many different ways to put the body in order without involving specialists from a car service. There would be a desire - after all, in the end, doing your favorite car is not at all work, but pleasure, especially when the result of your efforts is noticeable and only pleases.
