True music lovers prefer to enjoy high-quality sound both at home and while driving a car. To listen to your favorite music in excellent quality, upgrade your speaker system. A pumped-up speaker consists of: a standard radio, an amplifier, a subwoofer and speakers. A subwoofer helps you get surround sound. In this article we will look at the selection and installation of a subwoofer (LF).
Passive and active subwoofer: differences and features
You have decided to install a full-fledged sound system in your car. The first question that you have to decide before purchasing is the choice between a passive and active subwoofer. Let's give a small educational program.
The passive subwoofer has a simple design. This is a housing and one speaker or several low-frequency audio heads. It is advisable to connect such a sub through an amplifier.
There are two ways to install a subwoofer in a car audio system without an amplifier: directly or with a crossover filter. The second allows you to get a cleaner sound, without distortion. Using this method, many save money, but such a connection does not provide good sound and can lead to a short circuit and failure of the radio, speakers or subwoofer.
An active subwoofer is a combination of several devices in one housing. Its design includes:
- audio amplifier;
- frequency divider;
- LF heads.
The housing contains linear inputs and outputs, audio power controls and frequency dividers.
An active sub is easier to set up. Using standard settings you get good bass. A passive subwoofer requires an external amplifier. Setting up a passive subwoofer is painstaking work. But the result will exceed all expectations. True music lovers achieve the best sound with passive subwoofers. Active costs 2-3 times more than passive. But the latter only works well with an amplifier that is purchased separately. As a result, we get approximately the same amount of costs.
Connection diagrams
The process of connecting a subwoofer and speakers in a car rarely causes difficulties. The recommendations described below will help you install and connect correctly.
Passive
Passive bass is recommended to be connected through a sound amplifier. It has connectors for connecting a subwoofer. For switching, special acoustic wires are used. They come complete with a subwoofer. If they are not available, then we buy the required length in a specialized store or at the radio market. The ends must have RCA connectors (tulip type).
In the absence of an amplifier, a passive subwoofer is connected to the front speakers. The sound will become more voluminous, but it is difficult to call it quality. A low-pass filter will help correct the situation. Through it, sound is sent to a passive subwoofer. The purpose of the filter is to suppress the high-frequency component of the sound signal and feed only the bass to the subwoofer. This device is sold in stores. But if you have the skills and ability to hold a soldering iron in your hands, then it’s not difficult to assemble the filter yourself. Schematic diagrams of the device are available in specialized literature and on the Internet.
The signal from the standard radio goes to the amplifier, and from it is distributed to the speakers and subwoofer
Active
An active subwoofer does not require the use of an amplifier. Its body contains an additional module for sound amplification and frequency controls for fine tuning.
Modern car radios have a linear output for connecting a subwoofer. It is connected to the input of the active subwoofer using an speaker cable. Another wire is designed to control the subwoofer. It is designated as REM or System Remote Control. The cross-section of the control wire is not critical; a weak current flows through it.
The active subwoofer is connected directly to the standard radio. Power to the subwoofer falls from the car battery A power cable from the battery is laid separately to power the active subwoofer. Be sure to install a fuse in the power supply circuit of the amplifier and active subwoofer. It protects the speaker system from short circuits.
Connecting the sub: important points and instructions
Let's look at the process of installing a subwoofer in a car with a connection to the standard radio. Before starting work, pay attention to a few points:
- The subwoofer housing and the amplifier itself are large devices. We need to think about where to place them. Most often, a place is allocated for them in the luggage compartment of a car.
If possible, the amplifier is placed on the back of the rear sofa. Remember that the amplifier and active subwoofer become hot during operation. These devices require good cooling. Position the amplifier and sub so that air can circulate freely around the devices.
- If the standard head unit does not have outputs for connecting a subwoofer and there is no control wire, then think about replacing the radio. This will protect you from possible short circuits, simplify connecting the subwoofer and allow you to get high-quality sound. An active woofer requires battery power. The power cable must be of appropriate length and cross-section. Consider where to route it from the engine compartment to the luggage compartment. It must be firmly fixed with plastic clamps.
- Check the presence of a line output for the subwoofer on the standard radio. If not, there is a way out. The subwoofer is connected to speakers or AUX output. This solution is not ideal and affects the quality of sound reproduction.
- To control the active subwoofer, a System Remote Control wire is required. Without it, the amplifier module does not work. If the radio does not have such an output, then you can directly supply constant +12 volts to the input of the active subwoofer. With this connection, the amplifier operates continuously and discharges the battery.
Required tools and materials
To successfully connect a subwoofer with your own hands, prepare the following tools and materials:
- wire cutters;
- set of open-end wrenches;
- insulating tape;
- pliers;
- plastic ties;
- power cable;
- speaker cables;
- 60A fuse in the housing;
- plastic pullers for dismantling trim elements.
The length of the wire for powering the subwoofer and speaker cable depends on the specific car model and the possibility of laying the wiring under the trim. The cross-section of the power cable depends on the power of the active subwoofer or amplifier. For example, the power of a subwoofer is 200 watts, divided by 12 (the voltage in the electrical circuit of the car), we get 16.7 amperes. The power cable must withstand this current and not overheat. Based on this, the wire cross-section is selected.
Step-by-step instructions for installing an active subwoofer
- Turn off the power to the car and remove the terminals from the battery.
- Route the power cable from the battery to the subwoofer installation location. The wire must not get under the pedals or interfere with the operation of other mechanisms..
- Install a fuse on the wire near the battery. Do not connect the power cable to the battery terminal.
The subwoofer is powered by a rechargeable battery. Be sure to use a fuse to avoid wiring troubles - Remove the original radio and inspect the rear panel. Locate the line output for the subwoofer and the control wire.
Find the linear output for the subwoofer and the control wire - Route the speaker cables and REM (System Remote Control) wire from the radio to the subwoofer location. Place the wires under the trim elements and secure them securely with plastic clamps.
All wiring is laid under the trim elements of the car interior. It is securely fastened with plastic clamps - Connect the control wire, speaker cable, power and ground wires to the subwoofer. Take the “earth” from the metal surface of the car body.
- Connect the sub and REM wire to the radio. Carefully insulate the twisted areas. Install the radio in its original location.
- Connect the power cable to the “+” terminal of the battery.
Video: The easiest way to connect an active subwoofer
To understand the details and installation sequence, watch the video. Perhaps it will help you evaluate your strengths and get an answer to the question: who will upgrade the sound system of your car?
Installation nuances in cars of different brands
The subwoofer and amplifier are placed in the luggage compartment in 99% of cases. But the trunk does not always have sufficient volume. For example, in a VAZ 2114 it is problematic to place a passive subwoofer and amplifier and leave room for transporting something. Therefore, for 2114 it is better to choose an active subwoofer with a suitable housing. Fortunately, car audio stores offer a wide selection of models of different power and configurations.
Take the installation of the power cable seriously. Look for a way to route the power wire through the factory holes. Use rubber or plastic couplings to move from the engine compartment to the luggage compartment. The wire should not come into contact with metal. This will help protect it from chafing and possible short circuits.
For the power cable, it is recommended to use plastic or rubber couplings for transition from the engine compartment to the passenger compartment and from the passenger compartment to the luggage compartment Self-installation and connection of the subwoofer will take from 1.5 to 3 hours. The procedure is simple, but requires care and precision. If you have doubts about your abilities, contact specialists installing speaker systems. They will select the speaker components and connect them. And after 2-3 hours you will be able to enjoy high-quality surround sound in your car.
Subwoofer in Ford Focus 2
The subwoofer in Ford Focus 2 is designed to significantly improve the performance of the built-in speaker system. A stealth subwoofer Ford Focus 2 or a speaker in a different design will enrich the sound with bass, which is so lacking for an understanding car audio lover.
A general view of the problem of connecting a subwoofer and speaker systems in Ford Focus 2
Let's start with the fact that many “focus players” want to leave the old car radio and acoustics, simply adding and integrating a subwoofer with them, powering all the speakers through an amplifier.
To realize such aspirations, you can go in 2 ways:
- Unsolder the linear connectors from the standard device, which will cost about 3 thousand rubles;
- Install a divider on the high-level outputs.
The first option is considered as the most correct, since the car radio amplifier is excluded from the overall system (see), and the sound quality does not suffer from this. An external amplifier is now responsible for it.
Note. Although the preamplifier still remains in operation, in this case it is considered the least evil of a standard device.
The second option leaves the amplifier running. It introduces corresponding distortions into the path. This option also involves replacing the standard acoustics with speakers of higher power.
To use the second option, you must do the following:
- Stock up on a standard set: buffer, amplifier, wires and 2 dividers;
- Dismantle the standard device by inserting removable keys;
- Unhook the standard connector from the car radio;
- Set the amplifier so that it turns on simultaneously with the ignition;
- The power cable comes from the battery;
- We install the dividers to the Sony output, having cut the wires in advance;
- We place the amplifier in the luggage compartment next to the shelf.
Note. In Ford Focus 2 the shelf itself is not level. Therefore, it is recommended to make a plywood spacer and cover it with black carpet.
- We fix the amplifier to the spacer and carefully connect the cables;
- Connect the sub and enjoy.
Choosing a location for the sub
This issue should be given the greatest attention, since there may be several installation options in the Ford Focus 2.
Every car enthusiast dreams of driving with the breeze to the mesmerizing bass of your favorite rock song. But ordinary acoustics will not be enough for this, namely, it will not provide the volume of sound, its depth, which only a high-quality subwoofer can provide.
It would seem that this issue is clear, a subwoofer is definitely needed, but for some reason, most motorists simply cannot imagine where such a speaker can be mounted that will provide maximum efficiency for the entire speaker.
So, let's look at everything in more detail:
- To begin with, let's say that different types of acoustic design are used in cars. In principle, there are four main ones, and the option called “free air” is more popular.
Note. Note that the use of complex speakers for the woofer makes it possible to install an amplifier with less power. At the same time, the sound quality and volume will remain at the same level. Considering that the price of an amplifier largely depends on its power, this aspect is extremely important.
- When choosing a sub, you must first pay attention to the number of voice coils. The more coils a woofer has, the less power the amplifier can have, again;
- The most popular are those sold with built-in amplifiers. In this case, the car enthusiast’s task is significantly simplified.
Several installation options
So, where can a car enthusiast put the purchased sub:
- The first option, which is considered the simplest and most suitable for sedans, involves installation in. This method will not work for Ford Focus 2 and the speaker must be selected with a special low-frequency head;
- Installation in the armrest in the rear seat. This option is basically not bad. It is often used by music lovers. The principle is the same as when installing in the rear parcel shelf, although there are some nuances.
Note. With such an installation, care must be taken to ensure that the holes are of sufficient size and do not have a negative effect on the woofer cone. Otherwise, there are no special requirements, except that it would be useful to construct a well-insulated wall behind the back of the sofa.
- The most ideal option for hatchbacks is a stealth type installation. In other words, the speaker is placed so as to take up as little space as possible. It can be mounted in the outer niches of the luggage compartment or under the spare tire.
It turns out that you can install a sub in a Ford Focus 2 with your own hands, without any problems, if you know all the intricacies of the process and use competent instructions. Video and photo materials can provide invaluable assistance. The prices of modern subwoofers vary. It all depends on the specific model, but saving on this speaker is not recommended.
Ford focus 2 subwoofer connection, ford mondeo tuning
Ford focus 2 subwoofer connection, ford f250 ford f250
connecting a subwoofer to the standard radio - Ford Focus 2 Club Aug 31, 2011. City: Moscow. Hi all! So I decided to improve the audio system in my car a little.
6000CD, Sony and subwoofer. / FF2 Additional equipment and spare parts / FFClub 🙂 Oct 18, 2010. Hello everyone! Yesterday I installed a sub and amplifier in a Ford Focus 2, the problem is that I connected a thick wire.
Connecting a subwoofer / Audio, multimedia, navigation. November 7, 2011. Ford Focus Club. The actual question is how to connect a subwoofer to the rear speakers. # Edited by: PyZhiK-21. did just that. I've been skating with my sub for 2 months now;).
Making a stealth subwoofer in a Ford Focus with your own hands - Projects. July 31, 2011. Making a stealth subwoofer in a Ford Focus with your own hands. housing, which will consist of 2 layers of plywood, and in the place where the subwoofer speaker is attached - of 3 layers.
Installing music in Ford Focus II Installing Car Radio Prology DVS-2125 in Ford Focus II Car Radio Prology DVS-2125 · Installation.
AVIS. Ford Focus II, car audio installation Example of working with Ford Focus II, car audio installation. Connected a subwoofer (Mac Audio). Sony stood back up.
New Focus Club - Installing a subwoofer yourself - Ford Focus 3 There is a line of active subwoofers. It will play no worse than if you connect it to a signal from.
FAQ Ford Focus II k Ford Focus 3 FAQ Ford Focus II. Dimensions of Ford Focus Hatchback · Hood lock. Installing the Subwoofer By Yourself 10.
Installation of subwoofer and AUX input (Ford 6000CD) report | Focus Club. Removing the Ford 6000CD radio took about 2 hours, despite the fact that I read a lot.
How to connect an active, passive subwoofer to a car radio. But now the question arises, how to connect a subwoofer. How to connect an active subwoofer to a car radio. I have a Ford Focus 2, the stock head plays great. and the speakers are not.
New occupant of the trunk. (Installing a subwoofer) Oct 22, 2010. I drive a .0 AT Sea Gray Hawk (previously Lada 2110) Moscow, South-Western Administrative District.
Personal experience: Ford Focus II Installing the MYSTERY MBB-302A subwoofer in a Ford Focus 2. 1. At first I read a lot on the Internet how.
How to properly install and connect an amplifier When connecting a subwoofer, you need to turn on the LPF filter, and in the case of. If you want to achieve high-quality sound, take separate 2. Tour 1.8T WTS Exclusive 210hp (previously Mazda 3, Ford Focus and Alfa Romeo 156).
Installing a passive subwoofer in Ford Focus 2 - Auto - Catalog. 28 Dec 2009. 1 serpantinium (17.10.2011 03:39). Good afternoon. I would like to note that this is a scripted site.
DreVMontagek Site archive k Line-out on the radio Ford 6000 July 26, 2011. My friend bought and asked for help connecting the subwoofer to.
DreVMontage k line output Jul 26, 2011. A friend of mine purchased a Ford Focus 2 and asked for help connecting a subwoofer to.
Music for Ford Focus II (Ford Focus 2) Installing an active subwoofer on Ford Focus II. Installing and connecting an active subwoofer on a Ford Focus 2.
6000CD, Sony and subwoofer. / FF2 Additional equipment and. — FFClub Ford Focus Club. Here’s another question: I was planning to connect an active subwoofer, but I think there’s no difference. We buy 2 installation kits from Mystery and a power cable for the amplifier, too.
New theme BestText version. FFClub 🙂 FF2 cars Additional equipment and spare parts.
Connecting two subwoofers Topic: Connecting two subwoofers. Car: FORD focus 2; Age: 30; Posts: 1129.
Connecting a subwoofer / Audio, multimedia, navigation. Ford Focus Club. The actual question is how to connect a subwoofer to the rear speakers. # Edited by: PyZhiK-21. 2. Installing an amplifier and replacing the acoustics with better ones.
All about radios Ford 6000 and Sony / Ford Focus 2 / FFClub :) Is it possible to change speakers, connect amplifiers and a subwoofer (or whatever it is spelled there) for the Ford 6000?
New topic - Ford Focus Ford Focus Club. 2. Radio package 32: CD/MP3 + AM/FM audio system, 3.5 monochrome display. Hands Free system (the ability to wirelessly connect a mobile phone to...
how to connect a subwoofer to the standard radio in a ford focus 2 there are special amplifiers that can take output from the speakers, buy such an amplifier and that’s it, if.
subwoofer May 17, 2012. subwoofer. Installing the MYSTERY MBB-302A subwoofer in a Ford Focus 2 car. 1. First.
DreVMontage k Ford 6000 July 26, 2011. A friend of mine purchased a Ford Focus 2 and asked for help connecting a subwoofer to.
DreVMontage Aug 6, 2011. A friend of mine purchased a Ford Focus 2 and asked for help connecting a subwoofer to.
How to connect a subwoofer to a plasma (2/2) - Forum - First Auto Club The question is how to connect them together? There are some. 2. All pages. Ford Focus C-MAX #39;05.
How to connect a subwoofer to a plasma (2/2) / Computer Science and Communications - Forum The question is how to connect them together? There are some. 2. All pages. Ford Focus C-MAX 2005.
Installing a subwoofer on - Reports - catalogcars.ru May 1, 2012. Installing a subwoofer on . The control wire needs to be connected here. Step 2.
Installation of acoustics - installation center Yekaterinburg. Khrustalnaya, 2 tel. Our work / Installation of acoustics and car radios on Ford Focus 2. Installation, Sale, Connections of car alarms, xenon, car radios, acoustics. Manufacturing of podiums, subwoofers. Price-.
[Kilowatt-Avtok auto electronics center in Cherepovets. Subwoofer Ford Focus 2 () production, sale. Subwoofer. You can connect from one to four video cameras to a convenient hidden video recorder. Buy and.
Ford Focus 2 - Autosecurity club. Ford Focus 2 has standard Ford 6000 CD AUX music, can you tell me if I can add a subwoofer to it?
Car audio.Alpine.Soundstream. Part 2 Installing Ford music. January 4, 2010. Part 2 Installing music for Ford Focus 2. sound by AleksandroNT31950 views; Making a stealth subwoofer (master class). Connecting a car amplifier at home!
Volga signals wiring diagram ford focus, kustanai nov 2, 2010. fuel pump connections ford focus 2 air signal wiring diagram. UAZ engines Volzhskie JSC. connecting a subwoofer to 6000cd - Best Files For You.
How to connect a 2-channel amplifier as a subwoofer? How to connect a 2-channel amplifier as a subwoofer. This is a standard Ford Focus device, it may not have linear outputs. There is a solution if it is on an amplifier.
Electrical diagram, catalog of kinematic diagrams. Welcome to the resource dedicated to Ford focus 2 electrical diagram and gas 31029 electrical diagram.
Head unit Ford Focus 2 Head units Intro 8 800 555 27 57 (free call within Russia). +7 (495) 502.
standard radio for Ford Focus Mondeo and Galaxy Velas V. Sep 27, 2011. connecting a rear view camera to a 2-din radio. It is possible to connect a camera. and low frequencies on the radio. Equalizer with separate subwoofer control.
installing a subwoofer in a car - Focus 2 - Ford - Ours. Installation: installing a subwoofer in a car in Ford Focus 2. Installation: installing a subwoofer in a car in.
I decided to add bass to my car. I bought an active sub FLI FU12A 1000V - it will do for starters. Now I’ll tell you in more detail about pulling cables, because I tried it myself and couldn’t really find anything.
0:8421. If there is a multi-level input (HI-INPUT) in the subwoofer, then connect to it, and not through the tulips - due to ignorance, I connected first through the tulips - then in the subwoofer with the sound turned off there was an engine background, and through the multi-level channel the sound quality is much higher , if the connection goes to the original radio!
0:1392 1:1897Multi-level input HI-InPUT
1:19472. The power cable from the battery must be pulled through the wing skin, and don’t forget the fuse! It is better to choose a copper cable; it hardly oxidizes and is cheaper!
1:2267
pulling the power cable through the fender to the battery under the hood
2:6083. Connecting the subwoofer's power - first I did it to the head of the radio, but when I turned off the car (the panel goes out after 10 minutes), the amplifier did not turn off. We made the power supply from the ignition - the sub switches on when you turn the key.
2:1002
Connecting to rear speakers
3:15664. The connection must be made to the rear speakers, there is a hell of a lot of wires there, I could barely find information about which wire goes to which speakers (photo below).
3:1865
Distribution of wires (plus or minus) in the standard radio ford focus 3
4:118
connecting to rear speaker wires
5:6975. The wire from the battery and the wires from the head should be on different sides, that is, if you route the power from the battery through the driver, then the cable to the speakers through the passenger side. (these wires should not be intertwined and pulled on one side - otherwise a background will appear in the subwoofer from the generator).
5:12196. If suddenly you connect to your original head through tulips, then you need to connect through an RCA adapter - tulips into it, from it to the head to the rear speakers.
5:1537
Everything is connected, everyone is happy!
6:562. Subwoofer backlight for Ford Focus 3
Installed a backlight for the subwoofer in a Ford Focus 3. Cheap and cheerful. See photo captions
6:295
Soldered for the first time in my life
7:846
The blue ribbon is stuck here
8:1408
Connection to trunk light
9:1995
The verification was successful))
10:49
In the dark under a lantern. For some reason the red in the photo fades into white. In fact the light is juicy red
13:1747
3. Refinement of the subwoofer housing in the Ford Focus 3
I didn’t have enough bass in the car, and the head was collecting dust in the closet, since there was no money in sight for creating a proper stealth in the near future, it was decided to install a regular box temporarily. Why was a 22 liter box purchased?
No matter how I tried to calculate it in JBL Speakershop, to create an even frequency response, I got from 18 to 22 liters for my speaker. In the article testing my speaker in the magazine AUTOZVUK, there was another “ideal volume of design for my speaker, namely 26 liters. But I had already purchased the case by that time, so it was too late.
As a result, the internal volume of the box turned out to be 22-2.6 = 19.4 liters.
The case is assembled quite well, although not without flaws, which we have to correct. The first is the cable from the port to the speaker
The cut shows that the cable is aluminum, with copper coating
15:2040
Compressed very poorly
16:540
quality is disgusting
17:1098
The wire was replaced with 4 sq. mm. DAXX OFC needed 2 m at 197 rubles per meter.
Next, I decided to make it airtight, because... he didn’t inspire confidence in me, and the first thing I started sealing with was the port, by the way, it was also of obscene quality; when taken out, it cracked and broke. The quality of the plastic is disgusting. Therefore, it was decided to buy a more decent one for 220 rubles at Audiomania.
seam sealant
20:1172
without port
21:1698
glue in the port
22:30
on the back side
24:1097It seemed to me that the structure made of 16 mm chipboard was not entirely rigid (although I am also a reinsurer, so the box was glued inside with bimast).
24:1341
And then with biplast
26:35
The wires were crimped and then soldered; all ends that were clamped with clamps and screws were tinned, because the cable darkens noticeably quickly when exposed to air
27:804
I don’t know if it’s visible or not.
28:1352After which the speaker was glued in with the same sealant and screwed in with self-tapping screws.
I forgot to take the final photo.
Setting up the whole thing took about an hour last night and about an hour this morning. I managed to achieve the sound that I wanted, but in the end I still had to make a compromise due to the fact that my speakers at the front were apparently dying. An excellent bonus was the fact that the box was molded from a Ford, because he stood up to the back seat like a glove.
It plays perfectly, the bass is deep, musical, and hits the ears where it should.
There remains a big question for the installation studio that installed the amplifiers. There are no complaints about the front amplifier, but the subwoofer fails to protect against overheating and a couple of times under heavy load, but I have already corrected this problem.
I looked a lot at ready-made boxes with dynamics, tried on a lot of things for the car, but there was something I didn’t like. The goal was 2 dins and to take up the floor of the so small trunk. As a result, I came across a good idea here while driving, specifically in the FF3 hatchback, the questions regarding the sizes turned out to be unsuccessful. As a result, a box with similar dimensions was designed, but with a different opening (it hammers very hard).
28:733
We purchase materials
I needed:
· plywood (I took 15mm), which was cut right there to my dimensions (very convenient)
leroymerlin.ru/catalogue/…aterialy/fanera/13621922/
· liquid Nails
30:47I bought a good old moment, which worked well at the dacha (I bought 2 tubes, spent half of one tube, nothing will be useful at the dacha)
leroymerlin.ru/catalogue/…kontaktnye_klei/12293509/
Wire for the interior of the box
I take wires seriously, so I chose the Stinger SHW510G
www.auto-hifi.ru/other/model.php?mode=SHW510G
· Self-tapping screws
32:1668· terminal block
32:1691I chose the Aura WTB-068G company only because it is very convenient, I pressed and pulled out or inserted the wire, rather than screwing on the nuts.
www.auto-hifi.ru/other/model.php?mode=WTB-068G
inside view
35:1064· black paint
35:1098 35:1117· aerosol glue
35:1155
Construction process
The construction process is outrageously simple. Assembles like a box.
I tried it on first without delaying
37:61The joints are smeared with glue using a gun and tightened with screws, I tightened them along the screws at a distance of 7-10 cm.
37:281
A seat was cut out along the inner diameter of the din using a jigsaw.
38:953
Having assembled the box and not screwing the lid properly, I set about testing the resulting box
40:161
I didn't like the sound, much to my regret. After reading the forums, I realized that I could glue cotton wool inside, but there was no cotton wool. I glued it with Shumka Comfort Mat Bibiton 8 mm. Once I glued it, tested it and was very surprised, the sound changed a lot, became deeper and better.
41:1128
glued
42:1659After assembling the box, I glued it with carpet and painted the port black.
42:1797
43:17
Subwoofer in Ford Focus 2
The subwoofer in Ford Focus 2 is designed to significantly improve the performance of the built-in speaker system. A stealth subwoofer Ford Focus 2 or a speaker in a different design will enrich the sound with bass, which is so lacking for an understanding car audio lover.
A general view of the problem of connecting a subwoofer and speaker systems in Ford Focus 2
How to connect a subwoofer to Ford Focus 2
Let's start with the fact that many “focus players” want to leave the old car radio and acoustics, simply adding and integrating a subwoofer with them, powering all the speakers through an amplifier.
To realize such aspirations, you can go in 2 ways:
- Unsolder the linear connectors from the standard device, which will cost about 3 thousand rubles;
- Install a divider on the high-level outputs.
The first option is considered as the most correct, since the car radio amplifier is excluded from the overall system (see Microcircuit of a car radio power amplifier and a practical description of its functioning), and the sound quality does not suffer from this. An external amplifier is now responsible for it.
Note. Although the preamplifier still remains in operation, in this case it is considered the least evil of a standard device.
Installing a subwoofer in a Ford Focus 2
The second option leaves the amplifier running. It introduces corresponding distortions into the path. This option involves connecting a subwoofer and replacing the standard acoustics with speakers of higher power.
To use the second option, you must do the following:
- Stock up on a standard set: buffer, amplifier, wires and 2 dividers;
- Dismantle the standard device by inserting removable keys;
- Unhook the standard connector from the car radio;
- Set the amplifier so that it turns on simultaneously with the ignition;
- The power cable comes from the battery;
- We install the dividers to the Sony output, having cut the wires in advance;
- We place the amplifier in the luggage compartment next to the shelf.
CONNECTING THE SUBWOOFER TO THE ORIGINAL RADIO 6000CD
Not finding a clear video on the connection, I make it myself. JOIN VSP GROUP PARTNER PROGRAM: ...
Ford Focus 2 | Connecting Yatour and amplifier to 6000 CD radio | USB, SD card, AUX
At the moment, the cost of such an adapter is 2900 rubles. Select FRD2 from the catalog. Scheme connections linear...
Note. In Ford Focus 2 the shelf itself is not level. Therefore, it is recommended to make a plywood spacer and cover it with black carpet.
- We fix the amplifier to the spacer and carefully connect the cables;
- Connect the sub and enjoy.
Choosing a location for the sub
Subwoofer for ford 2
This issue should be given the greatest attention, since there may be several installation options in the Ford Focus 2.
Every car enthusiast dreams of driving with the breeze to the mesmerizing bass of your favorite rock song. But ordinary acoustics will not be enough for this, namely, it will not provide the volume of sound, its depth, which only a high-quality subwoofer can provide.
It would seem that this issue is clear, a subwoofer is definitely needed, but for some reason, most motorists simply cannot imagine where such a speaker can be mounted that will provide maximum efficiency for the entire speaker.
Subwoofer for ford focus 2
So, let's look at everything in more detail:
- To begin with, let's say that different types of acoustic design are used in cars. In principle, there are four main ones, and the option called “free air” is more popular.
Note. Note that the use of complex speakers for the woofer makes it possible to install an amplifier with less power. At the same time, the sound quality and volume will remain at the same level. Considering that the price of an amplifier largely depends on its power, this aspect is extremely important.
- When choosing a sub, you must first pay attention to the number of voice coils. The more coils a woofer has, the less power the amplifier can have, again;
- The most popular are active subwoofers sold with built-in amplifiers. In this case, the car enthusiast’s task is significantly simplified.
Subwoofer housing for Ford Focus 2
Several installation options
So, where can a car enthusiast put the purchased sub:
- The first option, which is considered the simplest and most suitable for sedans, involves installation in the rear acoustic shelf. This method will not work for Ford Focus 2 and the speaker must be selected with a special low-frequency head;
- Installation in the armrest in the rear seat. This option is basically not bad. It is often used by music lovers. The principle is the same as when installing in the rear parcel shelf, although there are some nuances.
Note. With such an installation, care must be taken to ensure that the holes are of sufficient size and do not have a negative effect on the woofer cone. Otherwise, there are no special requirements, except that it would be useful to construct a well-insulated wall behind the back of the sofa.
- The most ideal option for hatchbacks is a stealth type installation. In other words, the speaker is placed so as to take up as little space as possible. It can be mounted in the outer niches of the luggage compartment or under the spare tire.
It turns out that you can install a sub in a Ford Focus 2 with your own hands, without any problems, if you know all the intricacies of the process and use competent instructions. Video and photo materials can provide invaluable assistance. The prices of modern subwoofers vary. It all depends on the specific model, but saving on this speaker is not recommended.
