Permitted maximum gas weight 3302. Overall dimensions of the Gazelle

Car model, GAZ	3302	33023	33027	330273	2705	27057	330202	330232
Vehicle type	4x2	4x2	4x4	4x4	4x2	4x4	4x2	4x2
Total weight, kg	3500	3500	3500	3500	3500	3500	3500	3500
	1790	1920	2010	2140	1960 2070 1)	2180 2290 1)	1950	2005
Axle load of a fully loaded vehicle, kg
front	1200	1260	1380	1470	1245 1215 1)	1430 1400 1)	1290	1345
rear	2300	2240	2120	2030	2255 2285 1)	2070 2100 1)	2210	2155
Base, mm Overall dimensions, mm:	2900	2900	2900	2900	2900	2900	3500	3500
length	5480	5480	5480	5480	5475	5475	6616	6295
width	2066	2066	2066	2066	2075	2075	2066	2066
height 2)	2120	2274	2210	2364	2200	2300	2120	2274
awning height	2570	2570	2660	2660	-	-	2570	2570
Front wheel track	1700	1700	1720	1720	1700	1720	1700	1700
	1560	1560	1560	1560	1560	1560	1560	1560
	170	1560	1560	1560	1560	1560	1560	1560
	5,5	5,5	7,5	7,5	5,5	7,5	6,7	6,7
Control fuel consumption according to GOST 20306–90 at driving at a constant speed, l/100 km:
60 km/h	10,7	10,7	12,0	12,0	10,7	12,0	10,7	10,7
80 km/h	13	13	14	14	13	13	13	13
Maximum vehicle speed on horizontal section of a flat highway, km/h	130	130	130	130	130	130	130	130
Overhang angles (with load), °:
front	24	24	29	29	22	29	22	22
rear	24	24	27	27	18	19	17	23
Maximum incline overcome by the vehicle, with full load, %	26	26	30	30	26	30	26	26
Loading height, mm	960	960	1060	1060	725	825	1000	1000

1) For GAZ-2705 cars and mod. with two rows of seats.

2) For flatbed vehicles, the cabin height is indicated.

4.2. Cars GAZ-3221 and mod. Total information

GAZ car model	3221	32212	32213	32217	322173	322132	322133
Vehicle type	4x2			4x4		4x2
Total weight 1), kg	2905	3215	3180	3115	3390	3160	3230
Weight of the equipped vehicle, kg	2260	2215	2180	2470	2390	2160	2230
Axle load of a fully loaded vehicle, kg:
- front	1020	1195	1115	1165	1255	1110	ISO
- rear	1885	2020	2065	1950	2135	2050	2100
Base, mm:	2900	2900	2900	2900	2900	2900	2900
Overall dimensions, mm:
- length	5475	5475	5475	5475	5475	5475	5475
- width	2075	2075	2075	2075	2075	2075	2075
- height	2200	2200	2200	2300	2300	2200	2600
Front wheel track	1700	2700	1700	1720	1720	1700	1700
Rear wheel track (between the centers of dual tires), mm	1560	1560	1560	1560	1560	1560 |	1560
Ground clearance (under the rear axle housing at full weight), mm	170	170	170	190	190	170	170
Minimum turning radius along the track of the outer front wheel, m	5,5	5,5	5,5	7,5	7,5	5,5	5,5
Control 2) fuel consumption according to GOST-2030690 when driving at a constant speed, l/100 km:
60 km/h	10,7	10,7	10,7	12,0	12,0	10,7	10,7
80 km/h	13	13	13	14	14	13	13
Maximum vehicle speed on a horizontal section of a flat highway, km/h	130	130	130	130	130	130	130
Overhang angles (with load), degrees:	22	22	22	28	28	22	22
- front	17	17	17	19	19	17	17
- rear Maximum climb overcome by a vehicle with a full load, %	26	26	26	30	30	26	26

1) The gross vehicle weight is indicated taking into account the seating of the driver and passengers according to the number of installed seats.

2) Control fuel consumption serves to assess the technical condition of the vehicle and is checked under conditions regulated by relevant standards, and is not an indicator of operational fuel consumption standards.

4.3. Engine

Model	UMZ-42160 (Euro-3)	UMZ-42164 (Euro-4)
Type	4-stroke, injection
Number of cylinders and their location	4, in-line
Cylinder diameter and piston stroke, mm	100×92
Cylinder displacement, l	2,89
Compression ratio	8,8	9,5
Rated power, net kW (hp)	78,5 (106,8)
Maximum torque, net, daN×m (kgf×m)	22,5 (220,5)
at crankshaft rotation speed, rpm	2500
Cylinder operating order	1–2–4–3
Crankshaft rotation speed in idle mode, rpm:
- minimum (n min xx)	800±50
- increased (n rep xx)	3000±50
Direction of rotation of the crankshaft (observed from the fan side)	Right

4.4. Transmission

Clutch	Single disc, dry, hydraulically driven
Transmission	Mechanical, 5-speed with synchronizers in all gears
	Gear ratios:
	1st gear - 4.05
	2nd gear - 2.34
	3rd gear - 1.395
	4th gear - 1.0
	5th gear - 0.849
	Reverse - 3.51
Transfer case for 4x4 vehicles	Mechanical, has two gears: high (i=l.07) and low (i=l.87), as well as a symmetrical center differential with forced locking
Cardan transmission	Two shafts with three universal joints and an intermediate support Three shafts (for 4x4 vehicles) with
	six universal joints
Front axle of 4×4 vehicles:
main gear	Hypoid, gear ratio - 5.125
differential	Bevel, gear
steering knuckles	With cardan joints of unequal angular velocities
Rear axle:
main gear	Hypoid, gear ratio 5.125 - for 4x4 vehicles; 4.3 - for 4×2 vehicles
differential	Bevel, gear

A symbol that replaces the letter of the engine configuration option.

4.5. Chassis

4.6. Steering

4.7. Brake control

4.8. Electrical equipment

Type of electrical equipment	Direct current, single wire. Negative terminals of power supplies and consumers are connected to the housing
Rated voltage, V	12
Generator	3282.3771000
Starter	422.3708000 or 5732.3708000
Additional starter relay	711.3741–02
Engine control system UMZ-4216 (Euro-3):
Control block	- Mikas M10.3 (4216.3763–82) - for 4×2 type vehicles (main pair i=4.3) - Mikas M10.3 (4216.3763–12) - for 4×4 vehicles (main pair i=5.125)
throttle position sensor	0280 122 001 (f. BOSCH“)
oxygen sensor	25.368889
phase sensor	4063847050–01 or DF-1
timing sensor	23.3847 or DS-1
knock sensor	GT-305
electromagnetic injectors	0 280 150 560 (form. BOSCH“), ZMZ 9261 CENTURY 10 (f. SIEMENS“)
idle air control	РХХ60
dual ignition coil	48.3705 or 5810.3705
system coolant temperature sensor	234.3828
management
Engine control system UMZ-4216 (Euro-4):
Control block	- Mikas 12.1 (42164.3763000) - for 4×2 type vehicles (main pair i=4.3) Mikas 12.3 (42164.3763000–10) - for 4×4 vehicles (main pair i=5.125)
Nozzle	ZMZ6354 DEKA1D
Double ignition coil	48.3705 or 5810.3705
Throttle pipe with electric drive	40624.11481099
Accelerator pedal module	6PV010033–00 (Hylic“)
Submersible electric fuel pump module	7D5.883.046 SEPO - ZEM, Saratov or E04.4100000–21 AVTEL, Kaluga
Canister purge valve	21103–1164200–02 or 1103–1164200–03 or 21103–1164200
Spark plug	WR15YC (brand BRISK“) or WR7BC (brand BOSCH”)
Oil pressure alarm sensor	30.3829 or MM 111V
Absolute pressure sensor with built-in temperature sensor	ATPTSNSR-0239
Accumulator battery	6CT-66LR
Headlights:
right	0301215 202 or 1512.3775000
left	0301215 201 or 1502.3775000
Tail lights:
for vehicles with platform	171.3716 or 7702.3716
for vehicles with all-metal body	7202.3776 (right), 7212.3776 (left)
Wiper	60.5205010 or 70.5205000
Set of sound signals 20	20.3721–01 G/201.3721–01G

4.9. Body 1)

4.10. Cabin and platform

4.11. Basic data for adjustments and control

Oil pressure on a warm engine at idle speed, kPa (kgf/cm2)	127 (1,3)
Gap between rocker arms and valves on a cold engine at 15–20° C, mm
- for exhaust valves of cylinders 1 and 4	0,3–0,35
- for other valves	0,35–0,4
Normal liquid temperature in the cooling system, °C	80–105
Minimum crankshaft rotation speed in idle mode, rpm	800–850
Gap between spark plug electrodes, mm	0,7–0,85
Fan belt deflection when pressed with a force of 4 daN (4 kgf), mm	7–9
Deflection of the water pump and generator belt when pressed with a force of 4 daN (4 kgf), mm	8–10
Deflection of the power steering pump belt when pressed with a force of 4 daN (4 kgf), mm	6–10
Clutch pedal free play, mm	7–15
Clutch slave cylinder rod stroke, mm	18–20,5
Free play 5) of the brake pedal when the engine is not running, mm	3–5
Minimum permissible friction layer thickness, mm:
for front disc brake pads	3,0
for rear drum brake linings	1,0
Total steering wheel play, °	According to GOST R 51709–2001
The slope at which a vehicle with a full load is held by the parking brake system is not less than, %	16
Front wheel alignment angles: camber 6)	0°30"-1”
lateral inclination king pin 6)	8°
longitudinal inclination of king pin 6)	3°28"+30” (4°) 7)
wheel toe-in, mm	0–3
Tire air pressure, kPa (kgf/cm2):
front wheels	290+10 (3,0+0,1)
	330+10 (3,4+0,1) 7)
	240+10 (2,5+0,1) 8)
rear wheels	290+10 (3,0+0,1)
	240+10 (2,5+0,1) 8)
	270+10 (2,8+0,1) 9)

Note: The air pressure in the tires of each axle must be the same according to the specified values.

1) For cars with an all-metal body.
2) For GAZ-2705 vehicles with two rows of seats.
3) For GAZ-330202.
4) For GAZ-330232.
5) Free movement is ensured by the design of the vacuum brake booster.
6) The parameter is provided by the design of the front axle (front axle) and cannot be adjusted.
7) For GAZ-330202 and GAZ-330232.
8) For 4x4 type vehicle.
9) For GAZ-3221 and GAZ-32212.

The Gazelle car produced by the Gorky Automobile Plant is more likely to be classified as a small class truck; it can just as easily be classified as a passenger car. To drive a Gazelle, a category B license is sufficient, but the vehicle sometimes carries cargo that no passenger car can carry. With its advent in Russia, a new type of transport arose, which should most accurately be called commercial.

This is what the classic GAZ 3302 truck looks like

Commercial vehicles combine two remarkable qualities - the comfort of a passenger car and the carrying capacity of a small truck. It’s hard to imagine that there was once no such class of car in our country. The convenience of "Gazelles" is appreciated by many, and with their help in our time a considerable share of the transportation of goods and people is carried out.

Carrying capacity of Gazelle vehicles

The GAZ 3302 car is designed for a load capacity of 1.5 tons, but this characteristic is not the same in all modifications.

Overall dimensions of the car GAZ 3302

Loading capacity of other brands of the Gazelle family:

• GAZ 2705 – 1.35 t;
• GAZ-3221 - on average 1-1.2 tons, depending on the modification;
• GAZ 33023 “Farmer” – 1.2 t;
• GAZ-2752 “Sobol” (or GAZ-2217 “Barguzin”) - from 0.6 to 0.9 tons, depending on the version;
• GAZelle Next – from 1.25 t or 1.5 t depending on the model.

Often, commercial vehicle owners are not satisfied with the vehicle’s carrying capacity, and this is understandable. For business, it is important to carry as much cargo as possible per flight. And therefore, entrepreneurs use various methods to increase such an important characteristic of a car.

Table of technical characteristics of GAZ 3302

Although the carrying capacity of the onboard Gazelle is only one and a half tons, the body itself is still quite voluminous, and you can fit a lot of dense, heavy cargo into the car. As a result of overload, the springs sag and burst, and the frame bursts. Increase the load capacity in two ways:

• Install an additional sheet on all springs;
• Strengthen the frame.

After appropriate work, the load capacity increases by 500 kg. But you should not overload the car beyond the established norm.

Gazelle weight

The weight of the Gazelle also depends on the modification of the car. In addition, different models were equipped with different engines, and the weight of the engines is not the same. It is also logical that the design of the vehicle with a long wheelbase will be heavier than the Sobol or Barguzin.

The basic model GAZ 3302 has a curb weight of 1800-1850 kg, and the total weight of the loaded vehicle is 3500 kg.

Read also

Gazelle farmer technical specifications

Lots of other models:

Option cargo Gazelle

Dimensions

The dimensions of a Gazelle car can be known approximately, but sometimes it is necessary to know exactly all its dimensions. For example, a car needs to get into a cramped yard or drive under a low-lying power line. Here is a small table with the dimensions of the main factory Gazelle models:

But not only these basic models are produced by the Gorky Automobile Plant; in addition to this, there are also other modifications.

This is what onboard gas 330202 looks like

The onboard GAZ 330202 has an extended base, and with all the same dimensions as the base car 3302, its length has been increased to 6.6 m.

For more than two decades, the GAZ 3302 has occupied a leading position among small-tonnage vehicles. The carrying capacity of the GAZ 3302 and its dimensions quickly ensured its popular popularity. While recruiting it, he became the prototype for many models and went through two improvements himself.

The GAZ 3302 vehicle is designed for transporting cargo of various sizes and volumes, the weight of which does not exceed 1.5 tons.

According to its characteristics, the GAZelle is an on-board vehicle with a metal cabin equipped with two doors. Body with folding rear and side ports and removable awning.

GAZ 3302 became the founder of a whole series of on-board mini vehicles that have a 1.5-ton load-lifting class. Production of the car began in July 1994. The car underwent revision and improvement for the first time in 2003, and again in 2010. P The original budget model has been discontinued.

The appearance of the vehicle immediately makes it clear that this is a very compact mini truck that has good maneuverability. It fits well into city streets and can easily reach any points of the city infrastructure. Owners of medium and small businesses, summer cottages and farmers appreciated the advantages of the car. For them, a light-duty vehicle has become an indispensable assistant.

Device

Gas 3302 consists of components, assemblies and support systems. The vehicle structure includes:

1. Frame with cab and body.
2. Engine with attachments and clutch basket.
3. Gearbox.
4. Support systems, which include:

• fuel system;
• cooling system;
• Lubrication system;
• electrical system with starter and generator;
• heating and ventilation system;
• brake system;
• exhaust gas emission system.

5. Steering.
6. Chassis, which includes: front and rear axles, front and rear suspension, cardan transmission.

Bread van GAZ 3302

The advantages of the car and its disadvantages. Owner reviews

The high popularity of the GAZ 3302 lies in its many advantages. These include:

• Simplicity of design and high degree of maintainability. The design of the vehicle makes it easy to access components and assemblies and allows minor repairs to be carried out by the driver. There is no need to have a large set of different keys and accessories.
• Availability of spare parts and assemblies. These elements are not in short supply. Any component can be purchased at a car store or service station.
• Reliability of the vehicle, components, assemblies. Can work in any climatic conditions, with different loads.
• Good maneuverability. Able to turn around on a small area, in a limited space. Quickly picks up speed.
• Ease of Management. The location of the steering wheel, gear lever and pedals creates ergonomic conditions for the driver to work.
• Small sizes. The dimensions of the car allow you to move along narrow streets and through arched spans.
• Long period of operation. The resource reserve makes it possible to operate the car for more than 10 years without major repairs.
• The presence of a low body. Allows loading and unloading operations to be carried out without the use of lifting equipment.
• Significant load capacity, which makes it possible to transport large loads.
• Relatively low cost of the car.

The car also has weaknesses. These include:

• Low body sides.
• Lack of power steering on early models.
• Late model power steering often leaks.
• The ventilation system in the cabin is poorly efficient.

Many reviews say that that the GAZelle 3320 is indispensable on the farm. A small flatbed vehicle is a workhorse that performs many tasks at low maintenance costs. Owners consider increased fuel consumption to be a disadvantage of the car, as a result of which some of them install gas equipment.

Engine characteristics and fuel consumption

The model is equipped with ZMZ 40524, UMZ 4216 and Chrysler 2.4 L-DOHC engines. Some models are equipped with the GAZ 5602 engine, which is manufactured on the basis of the STEYR M 14 engine. The latest models are equipped with a more modified Cummins ISF 2.8 L engine. The table shows their technical parameters.

Parameter	Unit change	ZMZ 40524	GAZ 5602	UMZ 4216	Chrysler 2.4 L-DOHC	Cummins ISF 2.8L
Engine capacity	liter	2.4	2.1	1.9	2.4	2.8
Power	hp	133	95	123	133	145
Torque, maximum	N/m	214	205	204	220	235
Engine speed	rpm	4500	3800	4000	4200	4500
Fuel, brand		Gasoline AI 92 (95)	Gasoline AI 92 (95)	Gasoline AI 92 (95)	Diesel fuel Euro 3 (4)	Diesel fuel Euro 3 (4)
Fuel consumption per 100 km	liter	10-12	9-11	11-13	10-12	9-10

Performance indicators

The car is produced in an onboard version and as a chassis for installing the necessary equipment. Technical characteristics of GAZ 3302 The cars are slightly different from each other.

Parameter	Unit	Onboard	Chassis
total length	m	5.5	5.15
Width by mirrors	m	2.38	2.38
Cabin width	m	2.0	2.0
Platform width	m	2.05	2.05
Cabin height	m	2.1	2.1
Canopy height	m	2.6	2.6
Front overhang	m	1.05	1.05
Rear overhang	m	1.5	1.2
Distance between front wheels	m	1.7	1.7
Distance between rear wheels	m	1.55	1.55
Cargo body length	m	3.05
Cargo body width	m	1.97
Body height on board	m	0.4
Body height with awning	m	1.56
Clearance	m	0.17	0.17
Fuel tank capacity	liter	64	64

The remaining technical parameters are common to all modifications of the GAZ 3302 and are as follows:

1. Wheel formula – 4x2.
2. Number of seats in the cabin – 3 (driver and two passengers)
3. Curb weight – 1.9 t.
4. The total weight of the car is 3.5 tons.
5. Turning radius – 5.3 m.
6. The clutch is a dry single-plate clutch with a hydraulic drive.
7. Gearbox – manual, 5 forward and 1 reverse.
8. The front and rear suspension is spring type with a telescopic shock absorber on each strut.
9. Steering – “screw and ball nut” type, can be with or without hydraulic booster.
10. The brake system is hydraulically driven and has a vacuum booster and has two circuits.
11. Fuel tank capacity is 64 liters.
12. Load capacity of GAZelle 3302 – 1.5 tons

The characteristics allow the vehicle to be used to perform transport tasks of any complexity.

What can it be equipped with? Analogs

A gazelle with a body is the most common option that is produced at the factory. Taking into account the possibility of dismantling the body, the vehicle can be equipped with other equipment and perform various tasks based on the configuration. It could be:

1. Refrigerator refrigerator.
2. Dump truck with a folding body.
3. Isothermal van.
4. Tow truck for passenger cars.
5. Bread booth.
6. Platform for mounting a small crane.

More modern analogues “Farmer”, “Van” and “Next” are designed to increase the functions of the car. “Farmer” is most popular among owners of medium and small businesses and can perform the listed functions. The “Van” vehicle can be used as an armored collection carrier. “Van” and “Next” can be used as a mobile laboratory, an ambulance, or simply for transporting people.

Due to the fact that the GAZ 3302 flatbed has low sides, it is not recommended to equip the vehicle for transporting people in the back.

Cabin

The basic model of the car has a three-seater cabin. Some latest models are available with a cabin that seats six people, including the driver. In this cabin, the seats are arranged in two rows, and the cabin is equipped with a roof with a high ceiling. The basic three-seat cab has two doors with rearview mirrors. The cabin for six passengers also has two doors. Rear row passengers board through the right door after reclining the passenger seat in the first row.

The one-piece windshield with wiper and large side windows provide a clear view of the area for the driver and passengers. Some models were produced with a sleeping place for the driver.

The cabin is equipped with heating, air conditioning, ventilation and noise protection systems. The windshield is blown from the inside.

The machine is controlled using the steering wheel and gear shift lever. The systems are monitored using the dashboard, which is installed in front of the driver. It contains a speedometer, tachometer, coolant temperature and fuel reserve sensors.

The layout of the cabin and the location of the controls create a pleasant working environment for the driver.

Car cost

It is not possible to purchase a new original GAZ 3302, since its production has been discontinued.

Initial models can be bought from 70 to 150 thousand rubles. The price depends on the technical condition of the car, mileage and equipment.

Modified cars from 2003 and 2010 will cost slightly more. New cars, depending on the cabin equipment and engine brand, are priced from 600 to 800 thousand rubles.
Used 2003 models can be purchased for 100-150 thousand rubles, 2010 models will cost 230-270 thousand rubles.

If there is no need to buy a car, you can rent it. An hour of renting a GAZelle is estimated at 1.3-1.5 thousand rubles.

Small dimensions, a good engine and significant carrying capacity allow the vehicle to be used to perform various tasks.

The ability to replace the GAZ 3302 body with other equipment makes it a unique vehicle.

The GAZelle light-duty vehicle GAZ-3302 is the most popular commercial vehicle on the Russian market, born in 1994 and produced until 2010 (when it was replaced by the second generation). The need for such a machine was then dictated by the emerging market relations that developed in the country in the early 90s and required the constant growth of small-sized cargo transportation. The GAZ Group was the first to respond to the new growing market, promptly releasing the GAZelle family, and specifically the GAZ-3302 quickly conquered an empty niche, becoming the main assistant for small businesses.

Externally, the GAZelle is a compact and maneuverable “truck”, perfectly adapted to the Russian urban environment with narrow access roads to retail outlets, warehouses and other infrastructure facilities. At the same time, from the very first day of production, the GAZ-3302 was distinguished by its aerodynamic design of an all-metal cabin with large panoramic glazing and a practical bumper made of durable plastic. Initially, the GAZelle was equipped with a dull radiator grille and simple rectangular headlights, but later they were replaced with more modern elements, in particular attractive teardrop-shaped optics. We also note that GAZ also produced modifications with a cabin equipped with one berth. These included versions GAZ-330200-1404 and GAZ-330200-1748.

The GAZelle salon has a three-seater layout. At the beginning of its glorious journey, the GAZ-3302 received a very modest interior design in terms of ergonomics with rectangular and boring shapes of the front panel, but several restylings brought into the interior a more modern panel made of high-quality materials with well-thought-out ergonomic placement of controls, which made the GAZelle not not only a profitable, but also a convenient commercial vehicle.

The small-tonnage GAZ-3302 was equipped with an on-board cargo platform equipped with an awning with a frame made of metal arches. The platform itself had dimensions of 3056x1943 mm and was equipped with folding side and rear sides 380 mm high.
The manufacturer produced some GAZ-3302 trucks in the form of a chassis prepared for the installation of various specialized equipment.
In addition, there were modifications on the market with an extended loading platform (GAZ-330200-0404, GAZ-330200-0748, etc.), the length of which was increased to 3.7 meters.

As for the dimensions, the length of the standard GAZ-3302 was 5440 mm, of which 2900 mm was on the wheelbase, 990 mm on the front overhang, and 1550 mm on the rear overhang. The width of the GAZelle cabin is 1966 mm, the width of the truck along the sides is 2098 mm, and the total overall width including side mirrors reaches 2500 mm. The overall height of the GAZ-3302 at the top point of the awning is 2570 mm. The height of the GAZelle cabin is 2120 mm. The front and rear wheel tracks are 1700 and 1560 mm, respectively. The ground clearance of the truck under the rear axle housing at full weight is 170 mm.

Now about the weight characteristics. The curb weight of the car is 1850 kg. The total weight of the GAZelle is 3500 kg. It should be noted that the permissible load on the front axle is 1200 kg, and on the rear axle – 2300 kg. The carrying capacity of the first incarnation of the GAZelle-3302 is 1500 kg.

Specifications. The GAZ-3302 family of light-duty trucks was equipped with a fairly wide range of engines, some of which were used for just a few years.

Initially, the GAZelle used 4-cylinder in-line gasoline units ZMZ-4025.10 with an output of 90 hp, as well as ZMZ-4026.10 with a power of 100 hp.

Subsequently, all cars of the GAZelle family received new engines, among which the most popular was the gasoline ZMZ-40524, used on modifications GAZ-3302-404, GAZ-3302-408, extended GAZ-330202-404 and GAZ-330202-408, as well as all-wheel drive GAZ-33027-408. The ZMZ-40524 engine complies with Euro-3 environmental standards and has 4 in-line cylinders with a displacement of 2.46 liters, as well as an electronically controlled distributed fuel injection system. Its rated power is 133 hp. at 4500 rpm, and peak torque occurs at 214 Nm at 4000 rpm.

The second most popular gasoline engine for GAZelle trucks was the UMZ-4216 engine, known from the GAZ-3302-216 and GAZ-330202-216 modifications with an extended cargo platform. It also has 4 in-line cylinders, but with a total displacement of 2.89 liters and an improved distributed fuel injection system. The maximum output of this power unit is 123 hp. at 4000 rpm, and the upper torque limit is 235 Nm in the range from 2200 to 2500 rpm. The main value of the UMZ-4216 motor is the ability to install gas equipment in a specialized service center.

Among diesel power plants, the most popular were the GAZ-5602 engines, intended for modifications of the GAZ-3302-531, an extended version of the GAZ-330202-531 and the all-wheel drive truck GAZ-33027-531. The GAZ-5602 engine, built on the basis of the STEYR M14 engine, received 4 in-line cylinders with a displacement of 2.13 liters and a turbocharging system. Its maximum output is 95 hp. at 3800 rpm, and the peak torque occurs at 204 Nm, available already at 2300 rpm.

In addition, some GAZelles, for example modifications GAZ-3302-748 and GAZ-330202-748, were equipped with an imported Chrysler 2.4L-DOHC gasoline engine. This power unit has 4 in-line cylinders, a displacement of 2.43 liters, a distributed fuel injection system and a 16-valve timing belt. Its power is 150 hp. at 5500 rpm, and the upper torque limit rests at 224 Nm at 4200 rpm. There were also 4-cylinder ZMZ-406 units in the line of gasoline engines, in particular 2.3-liter ZMZ-4061.10 engines with 100 hp output. and ZMZ-4063.10 with a power of 110 hp.

All engines for the GAZ-3302 family are combined with a non-alternative 5-speed three-shaft synchronized “mechanics” with a hypoid final drive gear ratio of 5.125. The gearbox interacts with the engine through a friction single-plate dry clutch with a hydraulic drive.

All modifications of the GAZ-3302 are built on a frame chassis with dependent leaf spring suspension at the front and rear, complemented by hydraulic telescopic shock absorbers and an anti-roll bar on the rear axle.

The wheel arrangement of most modifications of the GAZelle is 4x2 with drive to the rear axle, but the small-scale GAZ-33027-408 and GAZ-33027-531 received a 4x4 all-wheel drive transmission with a front axle permanently connected through the center differential and ground clearance increased to 190 mm.

The GAZ-3302 brake system is dual-circuit, has a hydraulic drive and a vacuum booster. Disc brakes are used on the front wheels, while the rear wheels of the GAZelle are equipped with simple drum brakes. The GAZ-3302 parking brake is equipped with a cable drive. The steering mechanism of the car is built on the “screw-ball nut” principle and in some modifications (3302-408, 330202-408, 330202-531, 33027-408 and 33027-531) it is supplemented with a hydraulic booster.

At the moment, the production of the “original” GAZ-3302 has been discontinued (on the secondary market in 2017 it can be purchased for 80-200 thousand rubles), it was replaced in 2010 by a car with the same index, but already “GAZelle-Business” .

Popular commercial light truck. The numerous modifications created on its basis are perhaps the most popular vehicles that can be bought in their segment.

The GAZ 3302 model, due to its versatility, not only successfully holds its position in the market, but is also continuously expanding it.

Initially, the Gazelle was created as a universal transport for business use, but the technical characteristics of its platform allow it to adapt to the most unusual requirements.

On the chassis of this car you can install a body of any required type:

Light truck GAZ 3302: technical specifications

On the platform GAZ 3302 cars, sold by our company, there is a cargo with a total weight of up to one and a half tons. Loading and unloading the machine is not a hassle, since the height of the platform floor is only about a meter. Even the basic model with an open body is equipped with an awning, included in the price, which protects the cargo from bad weather and prying eyes. This awning is removable and installed on a collapsible frame base.

Driving a car allows you to only have a driver's license of category "B", and it is also not subject to rules and signs restricting the movement of ordinary trucks.

When looking at the photos of trucks sold by Autopartner Company LLC, one immediately notices their simple, but at the same time modern and practical design, which is complemented by high cross-country ability and maneuverability.

Naturally, the description of the model will not be complete without mentioning the achievements of the designers in the fight for driver comfort. Disc brakes GAZ 3302 on the front axle there is no concern about quickly and effectively reducing the speed of the car; the small turning radius and power steering ensure maneuverability even in dense city traffic.

On the "Special Offer" page you can see the discounts offered for this model as part of the promotion.

Technical characteristics of GAZ 3302

Characteristics	Meaning
Model	GAZ-3302 chassis/Gaz-33027chassis 4x4/Gaz-330202 (extended base)
Wheel Formula	4x2/4x4/4x2
Total number of seats	3/3/3
Overall dimensions, mm
Length	5140/5140/6130
Width	2380/2380/2380
Height	2120/2120/2120
Wheelbase (mm)	2900/29000/3500
Permissible gross weight (kg)	3500/3500/3500
Working volume, cm3	2464/2429/2890
Rated net power, kW, (hp) / rpm.	91 (123,8)/4500/ 98 (133,3)/5000/ 78,5 (106,8)/4000
Max. torque, kgf*m (N*m) / rpm	205/ 4000 / 204/4000 / 220,5/2500
Chassis
Wheels,(width)	175 R 16,185/175R 16 /195R16,185/175R16 / 175 R 16, 185/175R 16
Transmission	Five-speed, manual

GAZelle GAZ 3302: engine specifications

As the power plant for the GAZelle GAZ 3302, the designers chose two types of engines, on which the cost of the car depends - Cummins ISF2.8s129T or gasoline UMZ-4216. Both units are characterized by efficiency, reliability and high driving performance.

Characteristics of GAZ 3302	Engines
Type	Cummins ISF2.8s129T	UMZ-4216 (petrol)
Number of cylinders	4 cylinders, in-line	4 cylinders, in-line, 2 valves per cylinder
Power		multipoint fuel injection
Ignition		microprocessor
Working volume	2.781 l	2890 cc cm
Rated net power, kW, (hp) / rpm.	88,3(120)/3200	78,5 (106,8)/4000
Ecology	EURO - 3	EURO - 3
Maximum torque, Nm / rpm.	297/1600-2700	220,5/2500
Fuel used		AI 92-95
Cylinder diameter and piston stroke, mm	94x100
Cylinder displacement, l	2,781
Compression ratio	16,5
Cylinder operating order	1-3-4-2
Crankshaft rotation speed in idle mode, rpm: - minimum (nmin.xx) - increased (npov.xx)	750+-50 3600
Control fuel consumption according to GOST 20306-90 when driving at a constant speed, l/100 km: - 60 km/h - 80 km/h	8,5 10,3