New air conditioner ROYAL Clima series PRIMA.

March 1-2, 2016

X International Congress “ENERGY EFFICIENCY. XXI CENTURY. Engineering methods for reducing energy consumption in buildings"

The organizers of the congress are: the National Association of Organizations in the Field of Energy Saving and Energy Efficiency (NOE), NP "ABOK NORTH-WEST" and NO "APIK".

Permanent media partners are the magazines “Engineering Systems” and “Climate World”. General Internet partner of the X International Congress “Energy Efficiency. XXI Century. Engineering methods for reducing energy consumption in buildings" - portal "TopClimat".

As part of the sectional work, ways to reduce energy consumption by heating, ventilation and air conditioning systems, existing barriers to the implementation of legislation in the field of energy saving and increasing energy efficiency in the building complex and housing and communal services and ways to eliminate them, increasing the energy efficiency of residential and public buildings during major repairs and reconstruction, etc.

As last year, as part of the business program there will be Seminar EUROVENT/APIK “Innovation Center (INNOVATION/HUB)”, where representatives of the leading European Association of HVAC&R Manufacturers will share their experience and present key developments and technologies in the field of climate control technology.

The organizers are APIK and EUROVENT, with the support of "Eurovent Certified Performance".

In the Seminar program:

• Added value to your buildings: efficient air curtain technology made in Europe;
• Improving air quality in operating rooms: effective ways to reduce the risk of hospital-acquired and surgical infections;
• Basics of HVAC Product Testing, Certification and Accreditation
• How to effectively use energy labeling data to select the best products.

During the Seminar, simultaneous translation of speeches into Russian will be provided.

March 2, 2016

The organizer of the Forum is the Russian Union of Refrigeration Industry Enterprises (ROSSOYUZHOLODPROM).

The main goal of the forum is to draw the attention of government bodies and structures to the problems of the Russian refrigeration industry, to its dependence on imports, which borders on the loss of state security in the military, food and technological spheres.

The result of the forum will be the formed opinion of the participants on the list and level of existing main problems in the refrigeration industry and recommendations on ways to solve them.

March 2-3, 2016

International scientific and practical conference “Development of the refrigeration industry at the present stage”

The organizer of the conference is the Russian Union of Refrigeration Industry Enterprises (ROSSOYUZKHOLODPROM).

Main topics of discussion:

• Priority directions for the development of the refrigeration and microclimate industry in Russia.
• Environmental guidelines for the Russian market of refrigeration and climate control equipment.
• Research and development in the field of low-potential energy (heat pumps).
• Refrigerating machines using natural working substances (ammonia, CO 2, air, etc.).
• Refrigeration compressors
• Refrigeration technologies for sports facilities
• Import substitution in the refrigeration industry of the Russian Federation
• Refrigeration and cryogenic technologies in medicine

Schedule of events for the Business Program of the exhibition

March 1, 2016, Tuesday

10:00 ‑ 11:00	Registration of participants
1st day of the Congress “ENERGY EFFICIENCY. XXI CENTURY. Engineering methods for reducing energy consumption in buildings"
11:00 ‑ 13:00	Official opening. Panel discussion “Development and application of standard design solutions and regulatory regulation as ways to increase the energy efficiency of capital construction projects in Russia”
	Panel Discussion Moderator: Pekhtin Vladimir Alekseevich, President of the National Association of Organizations in the Field of Energy Saving and Increased Energy Efficiency, Chairman of the Organizing Committee of the Congress “Energy Efficiency. XXI Century. Engineering methods for reducing energy consumption in buildings"
11:00 ‑ 11:10	Opening remarks and awards ceremony for event participants
Block 1: Increasing the energy efficiency of real estate in Russia during the implementation of No. 261-FZ “On energy saving and increasing energy efficiency and on introducing amendments to certain legislative acts of the Russian Federation”
11:10 ‑ 11:20	“The practice of using energy-efficient technologies in low-rise construction and developing a roadmap to improve the energy efficiency of buildings” Valery Semenovich Kazeikin, Deputy Chairman of the Expert Council on Housing Policy and Housing and Communal Services under the State Duma Committee, Vice President of the National Agency for Low-Rise and Cottage Construction
11:20 ‑ 11:30	“On state policy in the field of energy saving and increasing energy efficiency in the field of construction and housing and communal services” Leonid Yurievich Pitersky
Block 2: Energy efficiency and import substitution. Contact vectors
11:30 ‑ 11:40	Greeting Rashid Khudai-Berdyevich Artikov, expert in the Expert Council under the State Duma Committee of the Federal Assembly of the Russian Federation on Energy, Deputy General Director of the NP "Russian Heat Supply"
11:40 ‑ 11:50	Greeting Daniil Mikhailovich Seledchik, member of the Presidium of the General Council of the All-Russian public organization "Business Russia", General Director of the company "Etalon-Invest"
11:50 ‑ 12:00	“Import substitution: modern energy-efficient equipment for capital construction projects” General Director of the marketing agency "Litvinchuk Marketing"
12:00 ‑ 12:10	"Verification of engineering equipment" Alexey Vladimirovich Busakhin
Block 3: Improving the system of technical regulation and personnel training as a way to introduce energy-saving technologies
12:10 ‑ 12:20	Greeting Ivan Grigorievich Dyakov, Chairman of the Committee for Engineering Support Systems, Communications and Telecommunications of Buildings and Structures of the Association “National Association of Builders”
12:20 ‑ 12:30	On mechanisms for improving the system of technical regulation in construction Larisa Stepanovna Barinova, First Deputy Chairman of the RF Chamber of Commerce and Industry Committee on Entrepreneurship in Construction, Chairman of TC 400
12:30 ‑ 12:40	Creation of albums of standard design solutions
12:40 ‑ 13:00	Questions

13:00 ‑ 13:30
13:30 ‑ 15:30	Section “Building Thermophysics and Energy Efficient Design of Enclosing Structures”
	Section co-chairs: Nikolai Ivanovich Vatin, Head of the Department of “Construction of Unique Buildings and Structures”, Director of the Civil Engineering Institute of the Federal State Autonomous Educational Institution of Higher Education “St. Petersburg State Polytechnic University” Grigory Petrovich Vasiliev
13:30 ‑ 13:40	introduction Grigory Petrovich Vasiliev, scientific director of INSOLAR Group of Companies
13:40 ‑ 13:50	“Results of thermal engineering tests of masonry made of large-format hollow ceramic and slotted expanded clay concrete blocks” Vladimir Aleksandrovich Lichman, Head of the Department for Modeling Thermal Conditions of Buildings at JSC NIIMosstroy
13:50 ‑ 14:05	“Ways to improve the energy efficiency of apartment buildings” Andrey Alexandrovich Petrov, Head of Design and Technical Support Department ROCKWOOL RUS Group
14:05 ‑ 14:15	“Instrumental assessment of thermal parameters of building envelopes erected in 2013-2015.” Ivan Stanislavovich Kurilyuk, leading expert engineer of the State Budgetary Institution “Center for Expertise, Research and Testing in Construction” (GBU “CEIIS”)
14:15 ‑ 14:25	“Statistics of thermophysical tests of enclosing structures based on the results of the implementation of state work by the State Budgetary Institution “TsEIIS” for the period 2013-2015.” Sergei Ivanovich Kryshov, Head of Department of the State Budgetary Institution “Center for Expertise, Research and Testing in Construction” (GBU “CEIIS”)
14:25 ‑ 14:35	“Increasing the energy efficiency of apartment buildings during major renovations” Victor Fedorovich Gornov, Head of the Center for Energy Saving and Efficient Use of Energy in the Construction Complex of JSC NIIMosstroy
14:35 ‑ 14:45	“Regulatory regulation in construction, control system for the execution of work” Elena Nikolaevna Fadeeva, Advisor to the President of the Association "National Association of Builders"
14:45 ‑ 14:55	"Full-scale thermal testing of buildings made of aerated concrete blocks" Sergey Valerievich Kornienko, Associate Professor of the Department of Architecture of Buildings and Structures of Volga State University of Civil Engineering
14:55 ‑ 15:05	“Comparative analysis of methods for calculating indicators and requirements for enclosing structures in Russia and other countries of the world. Assessment of the degree of harmonization, further opportunities for the development of domestic regulatory and technical documents" Alexey Yurievich Gorokhov, executive director of the NAPPAN association
15:05 ‑ 15:30	Discussion
15:00 ‑ 15:30	Registration of section participants
15:30 ‑ 17:30	Section “Energy service and energy audit”
	Section co-chairs: Vladimir Alekseevich Pekhtin, President of the National Association of Organizations in the Field of Energy Saving and Energy Efficiency, Chairman of the Organizing Committee of the Congress “Energy Efficiency. XXI Century. Engineering methods for reducing energy consumption in buildings" Leonid Yurievich Pitersky, Vice-President of the National Association of Organizations in the Field of Energy Saving and Energy Efficiency Improvement
15:30 ‑ 15:45	“On the current state of affairs in the field of energy saving and increasing energy efficiency” Leonid Yurievich Pitersky, Vice President, Head of the National Association of Organizations in the Field of Energy Saving and Energy Efficiency Improvement
15:45 ‑ 16:00	“Energy audit is the first step towards energy saving” Dmitry Andreevich Ivagin, Chairman of the Audit Commission of the National Association of Organizations in the Field of Energy Saving and Increasing Energy Efficiency, Deputy Chairman of the Board of the Volga Guild of Energy Auditors NP, General Director of EngineeringStroy LLC
16:00 ‑ 16:15	“Compliance with energy efficiency requirements when carrying out major repairs” Alexey Fedorovich Surov, Advisor to the President of the National Association of Builders
16:15 ‑ 16:30	“On the practical experience of Moscow Energy University in the implementation of energy service contracts” Sergey Vadimovich Guzhov, Deputy Head of the Energy Management Department of the National Research University "MPEI"
16:30 ‑ 16:45	“Comparison of the economic model of Energoservice with the Regional programs for the capital repair of apartment buildings” Dmitry Vadimovich Pakka, Commercial Director of Energy Service Company Teplo Severa LLC
16:45 ‑ 17:00	"Energoservice MKD: problems and their solutions" Dmitry Vladislavovich Serebryakov, Executive Director of SRO NP "Union "Energy Efficiency"
17:00 ‑ 17:50	“On the consequences of the ban on mandatory energy inspections” Yakov Mitrofanovich Shchelokov, member of the board, chairman of the Expert Council of the SRO NP "Union "Energy Efficiency"
17:15 ‑ 17:30	“Features of repeated energy inspection (mandatory and voluntary) in accordance with the requirements of Federal Law No. 261 of November 23, 2009” Tatyana Rustamovna Samuilova, General Director of Energy Union LLC, member of the Committee for the Protection of Rights of the National Association of Organizations in the Field of Energy Saving and Increased Energy Efficiency
17:30 ‑ 17:40	Discussion

12:30 ‑ 13:00	Registration of Seminar participants
13:00 ‑ 15:30	Seminar EUROVENT/APIK “Innovation Center (INNOVATION/HUB)”
Video from the EUROVENT/APIC “Innovation Center (INNOVATION/HUB)” Seminar
13:00 ‑ 13:05	Introduction to the seminar and introduction of speakers
13:05 ‑ 13:30	"Added value to your buildings: efficient air curtain technology made in Europe" Pontus Grimberg, International Sales Director Frico (Sweden), Representative of the Eurovent product group "European air curtains" Morten Schmelzer, Director of Business Development and Strategic Relations EUROVENT
13:30 ‑ 14:00	“Improving air quality in operating rooms: effective ways to reduce the risk of hospital-acquired and surgical infections” Romano Alberto Basso, Export Manager SAGICOFIM S.p.A. (Italy)
14:00 ‑ 14:30	“Fundamentals of testing, certification and accreditation of HVAC&R products” Federico Muñoz Sánchez, Technical Commercial Director CEIS (Spain)
14:30 ‑ 15:00	"Improving Energy Efficiency: Electronically Controlled Fans for Refrigeration and Air Conditioning" Andrey Khonstein, General Director of ebm-papst Rus LLC
15:00 ‑ 15:30	“Adiabatic humidification technologies and evaporative cooling effect: energy-saving opportunities when controlling humidity and temperature” Olga Serenkova, Technical Manager Carel Russia

March 2, 2016, Wednesday

Conference Hall, Pavilion No. 8, lower level of the Gallery

10:00 ‑ 11:00	Registration of participants
Forum “Refrigeration industry - status, problems and ways to solve them”
11:00 ‑ 14:00	Plenary session of the Forum “Refrigeration industry - status, problems and ways to solve them”
11:00 ‑ 11:20	Opening of the Plenary Session Welcome Speeches
11:20 ‑ 11:35	“State, problems of the refrigeration industry and ways to solve them” Yu.N. Dubrovin, Chairman of the Board of Rossoyuzholodprom, Honorary Mechanical Engineer, Academician of the International Academy of Refrigeration
11:35 ‑ 11:50	“Science is the cornerstone of the development of the refrigeration industry” A.V. Baranenko
11:50 ‑ 12:05	“Vocational education and training in the refrigeration industry” S.V. Belukov
12:05 ‑ 12:20	“Main trends in the development of refrigeration engineering in the light of international environmental requirements and increased energy efficiency” E.K. Urazov, Deputy Chairman of the Management Board, Chairman of the Board of Directors of OSTROV LLC
12:20 ‑ 12:35	“Energy efficiency is one of the main criteria for “quality” in the generation of artificial cold” A.A. Kirillov, Member of the Board of Directors of the TERMOKUL Group of Companies, General Director of Trade Group LLC
12:35 ‑ 12:50	“Import substitution in the field of refrigeration equipment is an important component of Russia’s security” I.A. Cherkasov, Director and Chief Designer of LLC "Experimental Design Bureau of Special Refrigeration Engineering TECHNATON", Honored Designer of the Russian Federation, Ph.D.
12:55 ‑ 13:05	“The role of cold in ensuring the country’s food security” G.A. Belozerov, Director of the All-Russian Research Institute of Refrigeration Industry (VNIHI), Doctor of Technical Sciences, Vice-President of the International Academy of Refrigeration
13:05 ‑ 13:20	"Regulatory support and certification in the refrigeration industry" V.B. Sapozhnikov, Doctor of Technical Sciences, Professor of the Department of Low Temperature Engineering named after. P.L. Kapitsa Institute of Chemical Engineering named after L.A. Kostandova University of Mechanical Engineering (MAMI)
13:20 ‑ 13:35	“Results of the Paris Climate Conference and what awaits us regarding refrigerants after 2020” A.V. Skorenko, Director of CJSC KHOLODON

Seminar Hall No. 4, Pavilion No. 2, lower level of the Gallery

14:00 ‑ 15:00	Registration of participants
1st day of the Scientific and Practical Conference “Development of the refrigeration industry at the present stage”
	Moderators: S.V. Belukov, Director of the Institute of Chemical Engineering named after L.A. Kostandov University of Mechanical Engineering, head. Department of Low Temperature Engineering named after. P.L. Kapitsa, professor, Ph.D. A.V. Baranenko, Director of the Institute of Refrigeration and Biotechnology, Head. Department of Refrigeration Systems, ITMO University, Prof., Doctor of Technical Sciences, President of the International Academy of Refrigeration
15:00 ‑ 15:20	“Development trends of the refrigerant market in an overview perspective” ABOUT. Tsvetkov, professor, doctor of technical sciences, head. Department of Theoretical Fundamentals of Heat and Cooling Engineering at ITMO University
15:20 ‑ 15:40	“Causes of occurrence and ways out of a systemic crisis in the choice of working fluids of refrigeration units” THEM. Mazurin, Professor, Doctor of Technical Sciences, Department of Theoretical Fundamentals of Heat Engineering, National Research University "MPEI"
15:40 ‑ 16:00	"Refrigerants: Trends and Trends from an Emerson Climate Technologies Perspective" S.A. Khodzhemirov, Sales Director Russia and CIS Emerson Climate Technologies
16:00 ‑ 16:20	“Entropy-statistical analysis of low-temperature refrigeration cycles and selection on its basis of the optimal store refrigeration system” V.V. Shishov, Ph.D. Assoc. MSTU im. N.E. Bauman A.M. Arkharov, Doctor of Technical Sciences prof. MSTU im. N.E. Bauman M.S. Talyzin, Support Engineer, Emerson Climate Technologies
16:20 ‑ 16:40	“Prospects for the development of refrigeration systems. Ostrov Green Technology System" A.P. Matveev
16:40 ‑ 17:00	“The operating principle of the Ostrov Green Technology system. Circuit solutions" E.S. Sakharov, Deputy Sales Director of Ostrov-Komplekt LLC
17:00 ‑ 17:20	“Feasibility study of the use of the Ostrov Green Technology system” A.A. Chukhchin, Leading Sales Engineer at Ostrov-Komplekt LLC
17:20 ‑ 17:40	“Pilot project, practical applications of Ostrov Green Technology” I'M IN. Tagiltsev, Leading Sales Engineer at Ostrov-Komplekt LLC
17:40 ‑ 18:00	“Design features of units of the Ostrov Green Technology system” D.V. Kolesnik, head of the design bureau of Ostrov-Komplekt LLC

Buffet hall, Pavilion No. 8, lower level of the Gallery

10:00 ‑ 10:30	Registration of participants
2nd day of the Congress “Energy Efficiency. XXI Century. Engineering methods for reducing energy consumption in buildings"
10:30 ‑ 13:20	Section “Ways to reduce energy consumption by heating, ventilation and air conditioning systems”
Video from the Section “Ways to reduce energy consumption by heating, ventilation and air conditioning systems”
	Section co-chairs: Alexey Vladimirovich Busakhin Alexander Mikhailovich Grimitlin, President of NP "ABOK North-West", Coordinator of NOPRIZ for the Northwestern Federal District
10:30 ‑ 10:50	“On the issue of optimizing the fins of air heaters” Vitaly Ivanovich Sasin, General Director of Vitaterm LLC, Candidate of Technical Sciences, member of the presidium of NP ABOK
10:50 ‑ 11:10	“Information Modeling Technologies (BIM) of building engineering systems. CAD MagiCAD for the development of modern energy-efficient solutions in the field of engineering systems of buildings" Evgeny Viktorovich Krinitsky, leading CAD specialist MagiCAD
11:10 ‑ 11:30	“Energy efficient solutions from Fläkt Woods. EcoNet recovery systems" Alexander Viktorovich Sverdlov, General Director of Flakt Woods Russia
11:30 ‑ 12:00	“Analysis of the climate systems market and prospects for its development in 2016” Georgy Gennadievich Litvinchuk, General Director of the marketing agency "Litvinchuk-Marketing"
12:20 ‑ 12:40	“Verification of engineering equipment. Status of work on updating the sets of rules SP 30, SP 60, SP 73" Alexey Vladimirovich Busakhin, Deputy Chairman of the Committee for Engineering Support Systems, Communications and Telecommunications of Buildings and Structures of the Association "National Association of Builders", Chairman of the Council of the Union "ISZS-Montazh"
12:20 ‑ 12:30	“Verification of heating radiators in the market of the Eurasian Economic Union” Alexander Vasilievich Kvashnin, Executive Director of the Association of Heating Radiator Manufacturers "APRO"
12:30 ‑ 12:50	"Industry standards NOSTROY" Ivan Grigorievich Dyakov, Chairman of the Committee for Engineering and Technical Support Systems for Buildings, Communications and Telecommunications of Buildings and Structures of the Association “National Association of Builders”
12:50 ‑ 13:10	“Monitoring and analysis of regulatory technical documents in the field of heat supply, ventilation and air conditioning” Albert Yakubovich Sharipov
13:10 ‑ 13:30	“Towards assessing the energy efficiency of domestic general purpose fans” Tatyana Stepanovna Solomakhova, leading researcher at FSUE TsAGI, Chairman of TC 061 “Ventilation and air conditioning” Yuri Georgievich Moskovko, scientific development advisor at INNOVENT LLC, candidate of technical sciences, member of the ASVK Council
13:00 ‑ 13:30	Registration of participants
13:30 ‑ 14:30	Public discussion of the professional standard “Specialist in refrigeration and ventilation equipment”
	Discussion Leader: Alexander Mikhailovich Grimitlin, President of NP "ABOK North-West", Coordinator of NOPRIZ for the Northwestern Federal District Speaker: Alexey Leonidovich Timofeevsky, Associate Professor, Department of Air Conditioning, ITMO University Invited experts: Irina Aleksandrovna Voloshina, Director for Development of the System of Professional Standards of the Federal State Budgetary Institution "Research Institute of Labor and Social Insurance" Yulia Valerievna Smirnova, Director of the Center for the Development of Professional Qualifications of the Russian Union of Industrialists and Entrepreneurs Nadezhda Aleksandrovna Prokopyeva, Head of the Vocational Education Department of the National Association of Builders Association Albert Yakubovich Sharipov, technical director of SanTechProject LLC Alexey Vladimirovich Busakhin, Deputy Chairman of the Committee for Engineering Support Systems, Communications and Telecommunications of Buildings and Structures of the Association "National Association of Builders", Chairman of the Council of the Union "ISZS-Montazh"
14:30 ‑ 15:00	Registration of participants
15:00 ‑ 17:00	Section “Public discussion of the Album of standard design solutions for automated individual heating points, assemblies for attaching utility pipelines to building structures”
Video from the Section “Public discussion of the Album of standard design solutions for automated individual heating points, assemblies for attaching utility pipelines to building structures”
	Discussion Leader: Alexander Mikhailovich Grimitlin, President of NP "ABOK North-West", Coordinator of NOPRIZ for the Northwestern Federal District
15:00 ‑ 16:00	“Typical design solutions for automated individual heating points and automated heat metering units” Pavel Borisovich Nikitin, General Director of the LOGIC CONSORTIUM - TEPLOENERGOMONTAZH Rostislav Vladimirovich Rudenko, leading designer of the LOGIC-TEPLOENERGOMONTAZH CONSORTIUM
	German Vladislavovich Grishin, President of the SRO Association "Energy Saving Metrology" Sergey Anatolyevich Bliznetsov, head of technical service, leading engineer of JSC Teplovodomer
16:00 ‑ 17:00	“Typical design solutions for attachment points for utility pipelines (VK, OV, Gas, DHW pipelines) to building structures” Efim Lvovich Paley, General Director of PKB Teploenergetika LLC
	The discussion experts will be: Albert Yakubovich Sharipov, technical director of SanTechProject LLC Alexey Vladimirovich Busakhin, Deputy Chairman of the Committee for Engineering Support Systems, Communications and Telecommunications of Buildings and Structures of the Association "National Association of Builders", Chairman of the Council of the Union "ISZS-Montazh" Vladimir Evgenievich Udovenko, General Director of CJSC "Polymergaz" Invited to participate: design engineers specializing in the field of thermal energy metering systems and units, as well as in the field of utility pipelines, engineers of operating organizations, developers of normative and technical documentation in the field of thermal energy metering systems and units and in the field of utility pipelines (VK, OV, Gas, hot water supply)

March 3, 2016, Thursday

Buffet hall, Pavilion No. 8, lower level of the Gallery

10:00 ‑ 10:40	Registration of participants
2nd day of the Scientific and Practical Conference “Development of the refrigeration industry at the present stage”
Video from the second day of the Scientific and Practical Conference “Development of the Refrigeration Industry at the Present Stage” - part 1 Video from the second day of the Scientific and Practical Conference “Development of the refrigeration industry at the present stage” - part 2
	Moderators: S.V. Belukov, Director of the Institute of Chemical Engineering named after L.A. Kostandov University of Mechanical Engineering, head. Department of Low Temperature Engineering named after. P.L. Kapitsa, professor, Ph.D. V.V. Shishov, Ph.D. Associate Professor, MSTU named after. N.E. Bauman A.A. Zherdev, Doctor of Technical Sciences, Professor, MSTU named after. N.E. Bauman B.T. Marynyuk
10:40 ‑ 11:00	"Problems and solutions of a continuous cold chain in the food industry" G.A. Belozerov, Doctor of Technical Sciences Director of FGBNU VNIHI B.S. Babakin, Doctor of Technical Sciences Professor, University of Mechanical Engineering (MAMI)
11:00 ‑ 11:20	"Refrigeration equipment of NPF "HIMHOLODSERVIS"" N.V. Tovaras, gene. Director of NPF KHIMHOLODSERVIS LLC M.A. Kolosov, Ph.D. Associate Professor, MSTU named after. N.E. Bauman
11:20 ‑ 11:40	“European legislation and advanced BITZER compressor technologies to protect the environment” I.G. Shokin, consulting engineer, BITZER CIS LLC
11:40 ‑ 12:00	“Energy efficient refrigeration supply with absorption refrigeration machines” A.N. Korniliev, Technical specialist, LLC "BUREAU TECHNIKI"
12:00 ‑ 12:20	“Comprehensive solutions from Emerson Climate Technologies for refrigeration units using ozone-friendly refrigerants” M.S. Talyzin, Certified Engineer, Emerson Climate Technologies
12:20 ‑ 12:40	“State and prospects for the development of coolants” M.L. Galkin, Technical Director of Spectroplast LLC, Doctor of Technical Sciences, Prof. Department E4, MSTU named after. N.E. Bauman
12:40 ‑ 13:00	Break
13:00 ‑ 13:20	"Trends in the field of Danfoss Smart store" M.V. Vysotsky, Head of Store Construction, Danfoss LLC
13:20 ‑ 13:40	“Renewable energy sources and resource conservation in low temperature technology” B.T. Marynyuk, Doctor of Technical Sciences, Professor, University of Mechanical Engineering (MAMI)
13:40 ‑ 14:00	“Technology and equipment of JSC NPO Geliymash for the production and use of liquefied natural gas” V.N. Udut, General Director of NPO Geliymash
14:00 ‑ 14:20	“Cryochemical nanotechnologies for the production of energy-saturated materials” M.B. Generals, Doctor of Technical Sciences, Professor, Head. Department of "Machines and apparatus for chemical production" University of Mechanical Engineering (MAMI)
14:20 ‑ 14:40	"Air refrigeration units of a new generation" EAT. Kulikov, Gen. Director of LLC "TURBOGAZ-HOLOD"
14:40 ‑ 15:00	“Refrigeration machine “DETA Kholod” based on the air refrigeration cycle: advantages, capabilities and prospects” V.V. Kulakov, Leading engineer DETA Engineering (DETA Engineering LLC)
15:00 ‑ 15:20	"ABHM: review of application in Russia" I.Yu. Alexikov, Chief Design Engineer, Ph.D. Energy Cold LLC
16:20 ‑ 18:00	School of Young Scientists
	Moderators: S.V. Belukov, Director of the Institute of Chemical Engineering named after L.A. Kostandov University of Mechanical Engineering, head. Department of Low Temperature Engineering named after. P.L. Kapitsa, professor, Ph.D. V.V. Shishov, Ph.D. Associate Professor, MSTU named after. N.E. Bauman
16:20 ‑ 16:30	"Vacuum-sublimation low-temperature refrigeration unit" A.F. Porutchikov
16:30 ‑ 16:40	“Vacuum heat pump distiller based on a RUTS type pump” I.I. Malafeev, postgraduate student, University of Mechanical Engineering (MAMI)
16:40 ‑ 16:50	"Study of the design of a minimally invasive cryoprobe" MM. Ryabinina, student, MSTU named after. N. E. Bauman
16:50 ‑ 17:00	“Mixed cryosurgical device with a flexible nozzle” A.I. Supreme
17:00 ‑ 17:10	“Method of cryosurgical treatment of solid tumors” M.K. Vasiliev, engineer, MSTU named after. N. E. Bauman
17:10 ‑ 17:20	“Study of the boiling process of multicomponent working fluids” A.S. Dolzhikov, postgraduate student, National Research University "MPEI"
17:20 ‑ 17:30	“Development and search for ways to introduce alternative low-temperature freezers with air refrigeration units” N.V. Sharapov, postgraduate student, University of Mechanical Engineering (MAMI)
17:30 ‑ 17:40	“Forecasting the dynamics of freezing of water ice on tubular elements of ice generators”	General meeting of APIC members Chairman: Kuzin Dmitry Leonidovich, executive director of APIC

Conference Hall, Pavilion No. 8, lower level of the Gallery

Parallel program

March 3, 2016, Thursday

Seminar Hall No. 2, Pavilion No. 8, 3rd floor

“News from exhibitors: presentations of new equipment and technical solutions”
11:00 ‑ 11:20	Registration of participants
11:20 ‑ 11:40	"New developments of the KLIMATVENTMASH Production Association"
14:00 ‑ 14:20	"New products from Siemens - 4 Nm air damper drives, Climatix controller for heating points and ventilation units, thermostats for controlling convectors and heated floors" Kabanov Alexander Alexandrovich, Product Specialist, Department of Automation and Building Safety, Siemens LLC
14:20 ‑ 14:40	"Hammer is a new star on the Russian climate equipment market" Alessandro Marini, representative of the Hammer Air Conditioning plant
14:20 ‑ 15:00	“Energy saving and increasing the efficiency of use of Systemair equipment” Dudina Anastasia Alexandrovna, product manager "Fans and accessories" of Systemair LLC	Organizer: “Two Clouds” company

Stay up to date with new products and trends Subscribe to the newsletter of the Association of Climate Industry Enterprises (APIK) and once every 2 weeks we will send you news of the climate industry, results of marketing activities, invitations to industry events.

“CLIMATE WORLD” is a real event in the domestic HVAC&R industry. Today, this campaign is the largest exhibition project in Russia, and throughout Eastern Europe, which has annually brought together participants from all over the world under one roof for more than ten years.

Exhibition directions

During its existence, the exhibition formed five dimensional areas that covered all areas of the climate business:

• air conditioning systems;
• ventilation units;
• heating and water supply systems;
• air treatment equipment;
• energy-saving appliances and heaters.

Purpose of the exhibition

The goal of the exhibition “CLIMATE WORLD” is not just to introduce exhibition guests to innovative technologies and equipment. The campaign actively promotes the development of the Russian HVAC&R sector, popularizes a civilized approach to work and creates healthy competition in the domestic market.

Exhibitors

In 2016, Russian suppliers, engineering companies, as well as world-famous brands traditionally took part in the exhibition. Expositions of regional domestic brands were adjacent to demonstration stands of representatives of such giant corporations as LG, Samsung, Daikin, Hisense, Panasonic, MitsubishiElectric, Fujitsu. For the first time, the EUROVENT association - the European Committee of Ventilation and Refrigeration Equipment Manufacturers - took part in the exhibition as an official partner. The debutants were Turkish suppliers and manufacturers of climate control equipment, as well as a joint stand of a collective exposition from Germany.

Results of the exhibition

Held on March 1-4 at Expocentre (Moscow). Portal TopClimat participated in this event for the tenth time, seven of which were as a general Internet partner. Below you can see our photo report about the exhibition, exhibitors and stand TopClimat.

Opening of the exhibition

The 12th International Specialized Exhibition “Climate World-2016” started on March 1 in the exhibition halls of Expocentre in Moscow. The exhibition was opened by:

1. Selivanov Sergey Viktorovich, Head of the Department of Exhibitions and Coordination of Participants in Foreign Economic Activity of the Department of Foreign Economic Relations of the Ministry of Industry and Trade of the Russian Federation;
2. Christian Herten, Honorary President of the European Committee of Ventilation and Refrigeration Equipment Manufacturers EUROVENT;
3. Thomas Schrader, Chairman of the Board of the German Mechanical Engineering Association VDMA;
4. Busakhin Alexey Vladimirovich, Deputy Chairman of the Committee for Engineering Support Systems, Communications and Telecommunications of Buildings and Structures of the Association “National Association of Builders”, Honored Builder of the Russian Federation;
5. Kuzin Dmitry Leonidovich, Executive Director of the Association of Climate Industry Enterprises;
6. Dubrovin Yuri Nikolaevich, Chairman of the Russian Union of Refrigeration Industry, Academician of the International Academy of Refrigeration, Honorary Mechanical Engineer of the Russian Federation;
7. Stepanov Alexander Georgievich, Director of the Breeze-Climatic Systems company - an authorized distributor of Hisense equipment;
8. Zhuravleva Vera Sergeevna, Head of the Department of Guest Exhibitions and Foreign Projects of Expocentre CJSC.

The official opening of the exhibition ended, according to the already established tradition, with a ceremonial cutting of the ribbon.

X International Congress “Energy Efficiency. XXI Century. Engineering methods for reducing energy consumption in buildings"

On March 1 and 2, as part of the Climate World exhibition, the congress “Energy Efficiency. XXI Century". The business program of the event opened with a panel discussion “Development and application of standard design solutions and regulatory regulation as ways to increase the energy efficiency of capital construction projects in Russia.” In addition, the congress discussed issues of import substitution in the field of HVAC, government policy in the field of energy saving, and more.

Fascinating details

On the eve of the new climate season, the event participants presented many new products and interesting HVAC solutions at their stands. It is worth noting that this year the companies did not ignore both adult consumers and children.

Exhibitors

More than 250 largest manufacturing companies and distributors of climate control equipment, installation, design and engineering enterprises from 23 countries took part in the exhibition “Climate World-2016”. Over 4 days, the exhibition was visited by about 24,000 people.

TopClimat at the exhibition

Portal website participated in the exhibition “Climate World” as a general Internet partner. During all four days, the portal’s employees and promoters did not sit idle: they advised on services TopClimat and the work of the All-Russian service for ordering climate control equipment TopCS.ru, were invited to take part in a lottery with prizes from the company

At the exhibition “CLIMATE WORLD - 2016”, the Breezart company will present a line of equipment for private and public swimming pools: duct dehumidifiers with outside air mixing and supply and exhaust units of various configurations.

Models of the “top” Breezart Pool Pro series are equipped with a two-stage plate heat exchanger made of polypropylene, a refrigeration machine that allows you to dry and cool the air in the summer and heat it in the winter, a water heater, as well as an automation system that minimizes energy costs to maintain a comfortable microclimate.

The automation system regulates the amount of supplied outside air depending on the time of year and operating mode of the installation, selects the optimal method of air drying, changes the room temperature depending on the temperature of the water in the pool, and the humidity level depending on the outside temperature. It should be noted that, while not inferior to foreign analogues in functionality, Breezart equipment is noticeably cheaper.

Information provided by Breezart

The Italian company CAREL, one of the world's leading manufacturers of air humidifiers, as well as automation for climate control systems, presents steam humidifiers of the thermoSteam series, which have been manufactured in Russia since the first quarter of 2016.

The thermoSteam series includes electrode steam humidifiers with a capacity of 1.5 to 65 kilograms of steam per hour and is a humiSteam series adapted to the needs of the Russian market. ThermoSteam and humiSteam humidifiers, as well as consumables and spare parts for them, are interchangeable, which makes it possible to replace an imported product with a domestic one when designing or purchasing equipment.

Information provided by KAREL RUS company

Split system MDV Aurora series with wired remote control

At the exhibition “CLIMATE WORLD - 2016”, the distributor MDV will present a model of the flagship series of household air conditioners. The new product can be seen at stand No. 2A15.

Aurora all-inverter split systems are equipped with a multi-stage air purification system, which consists of a high-density dust filter, four fine filters and can be equipped with a PLASMA filter.

Using the self-cleaning function of the indoor unit, dust is removed from the heat exchanger, which prevents the formation of bacteria and mold inside the air conditioner.

Temperature compensation and Follow Me functions guarantee maximum comfort.

If desired, a wired control panel KJR 12 can be connected to the Aurora series split systems, which is especially in demand in commercial facilities, for example, in small hotels or offices.

www.mdv-russia.ru).

Information provided GC "AYAK"

At the exhibition “CLIMATE WORLD - 2016” you will be able to see inverter mini-chillers MDV MDGC series.

Mini-chillers with air-cooled condenser are designed for air conditioning relatively small areas: apartments, cottages, shopping pavilions, mini-hotels and office buildings.

The series is represented by models with a capacity from 5 to 14.5 kilowatts (5.5–16 kilowatts in heating mode), which are prepared for working with water-glycol mixtures. The operating range of outside air temperatures is from +5 to +46 °C in cooling mode and from –15 to +27 °C in heating mode.

MDV inverter mini-chillers are supplied as an assembled device, all that remains is to connect the pipes with the coolant and the power supply, and there is no need to work with the refrigeration circuit, which significantly saves time and reduces installation costs.

All MDV climate systems use high-quality components from well-known manufacturers. The MDGC series uses pumps from the German manufacturer WILO and compressors GMCC. In addition, MDV mini chillers are equipped with built-in controllers. It is possible to connect an external wired control panel.

The exclusive distributor of MDV climate systems in Russia and the CIS countries is GC "AYAK" (www.mdv-russia.ru).

Information provided GC "AYAK"

Expansion of the Hisense SMART DC Inverter series of inverter split systems

The SMART DC Inverter series was replenished in 2016 with a model with a capacity of 7 kBTU/hour (2.1 kilowatts). Now the series includes six models with capacities of 7, 9, 11, 13, 18 and 24 kBTU/hour (2.1; 2.6; 3.2; 3.7; 5.6 and 6.55 kilowatts).

The appearance of a new model allows you to more accurately select an air conditioner for small and medium-sized rooms. The SMART DC Inverter series, which has an “A” energy efficiency class, is equipped with four-speed fans, double automatic blinds, a convenient and ergonomic remote control, a highly informative hidden display and a comprehensive air purification system, including an ULTRA Hi Density filter and two additional filters - photocatalytic and with silver ions.

The SMART DC Inverter series has retained the traditional set of functions for all Hisense air conditioner models: “I Feel”, self-cleaning, auto-restart and self-diagnosis.

"BREEZ-Climate Systems"

New series of ROYAL Clima air conditioners - ENIGMA Plus and ENIGMA Plus Inverter

In 2016, ROYAL Clima introduces to the Russian market a new line of classic and inverter household air conditioners of the ENIGMA Plus line.

Reliable and highly efficient ENIGMA Plus air conditioning compressors are made using Japanese technology.

The appearance of the indoor unit of the air conditioner can be easily transformed to fit into any interior: the transparent insert on the front panel can be replaced with blue, gray or brown.

The high-contrast LED display showing the set temperature can be switched off if desired.

The Enigma Plus line includes classic ENIGMA Plus air conditioners with power from 7 to 30 kBTU/h (2.22–8.4 kilowatts) and inverter air conditioners ENIGMA Plus Inverter with power from 9 to 24 kBTU/h (2.8–7.28 kW ).

Information provided by the company "BREEZ-Climate Systems"

Hisense Hitachi Air-Conditioning System Co., Ltd has updated the design and expanded the range of indoor wall units for VRF systems.

Eight models with cooling capacity from 2.2 to 7.1 kilowatts allow you to satisfy any customer requirements, ensure reliable operation and create a comfortable indoor microclimate for a long time.

The design of the blinds ensures uniform distribution of air flows, eliminating the formation of stagnant zones and guaranteeing the most accurate maintenance of the set air parameters. The high-tech Japanese built-in electric valve and the optimized fan impeller of the indoor unit make it possible to use Hisense indoor units in rooms with the most stringent noise level requirements.

Information provided by the company "BREEZ-Climate Systems"

FORTE: new powerful mobile air conditioner from ROYAL Clima

ROYAL Clima presents a new mobile air conditioner of the FORTE series. The new product features a modern design, wide functionality and electronic control. A special feature of the device is its refrigerating power - 5.2 kilowatts.

The energy efficiency class “A” device has three operating modes, three fan speeds, and additional settings. It is worth noting that FORTE, like other ROYAL Clima mobile air conditioners, uses ozone-safe refrigerant R410a.

The kit includes a full set of accessories and a convenient ergonomic remote control. The device does not require professional installation: it is enough to choose the most suitable location and ensure the removal of warm air outside the room. The chassis allows you to easily move the air conditioner from place to place.

Information provided by the company "BREEZ-Climate Systems"

New air conditioner ROYAL Clima series PRIMA

A distinctive feature of the PRIMA series split systems is the ionization function and a three-stage air purification system.

The filter system consists of a dust filter that traps small particles, a carbon filter that removes unpleasant odors and smoke, and a silver ion filter that destroys allergens and mold spores.

The “I Feel” and “I Favor” functions will help create comfortable conditions in the room and remember the selected settings.

The Prima series includes models with power from 2.36 to 7.55 kilowatts.

Information provided by the company "BREEZ-Climate Systems"

The ROYAL Clima company presents a mobile air conditioner with an unusual design - RACE. The energy efficiency class of the new product is “A”, the device has three operating modes, three fan speeds, and additional settings.

In addition to cooling, dehumidification and ventilation, the air conditioner can be used for heating: to do this, you just need to turn it over and swap the air distribution grille and the air duct.

RACE series devices are equipped with an automatic condensate evaporation system that prevents moisture accumulation when operating in cooling and dehumidifying modes.

Another feature of the air conditioner is the air duct, extended to 1.85 meters, which can be positioned vertically or horizontally without bending or losing pressure due to this.

The air conditioner is equipped with a full set of accessories and a convenient ergonomic remote control.

Information provided by the company "BREEZ-Climate Systems"

Premium inverter air conditioner ROYAL Clima

In 2016, ROYAL Clima introduces a series of inverter air conditioners VELA Bianco WI-FI Inverter.

An important feature of the new split system is the built-in Wi-Fi module, which allows you to control the air conditioner from anywhere in the world. To do this, just install a special application on a mobile device with Internet access.

A high degree of efficiency, exceeding the requirements for class A air conditioners (COP = 4.11, EER = 3.69), guarantees low energy consumption. The indoor unit has a modern four-speed fan, which allows for maximum comfortable operation at a low noise level of 24 dBA.

The VELA Bianco WI-FI Inverter series includes models with power from 2.85 to 7.8 kilowatts.

Information provided by the company "BREEZ-Climate Systems"

VIVA Italy

In 2016, ROYAL Clima introduces to the market a new series of storage water heaters VIVA, combining high quality, advanced control options and exquisite Italian design.

ROYAL Clima VIVA are classic cylindrical water heaters with an enameled tank. A two-layer uniform coating of the inner tank with glass-ceramic BIO-enamel (DUO BIO GLASS technology), developed by the leading enamel manufacturer FERRO (USA), guarantees reliable protection against corrosion and rust. For the production of tanks, high-quality sheet steel with a thickness of 1.8 millimeters is used. Fast heating of water is carried out thanks to a powerful copper heating element. The special energy-efficient iLike mode can significantly reduce overall energy consumption. An informative LED display with a soft blue glow informs you about the current water temperature.

Built-in magnesium anode with extended service life provides additional protection against corrosion and rust, and also prevents the formation of scale. Thanks to the thermal insulating material evenly distributed between the tank and the body, the water stays hot longer.

The water heaters feature an ergonomic design, a scratch- and rust-resistant pearl matte finish, ease of installation, low power consumption and the presence of all necessary accessories.

All series of ROYAL Clima water heaters are equipped with protection against overheating, excess pressure inside the tank and leakage, and have a high class of moisture and electrical protection.

Information provided by the company "BREEZ-Climate Systems"

At the exhibition “CLIMATE WORLD - 2016”, Systemair, in part of its exposition dedicated to the German plant Menerga, will present in Russia for the first time a unique counter-flow recuperator in the line of ThermoCond 38 / Adconair 76 units.

The recuperator is not subject to corrosion, as it is made of polypropylene. Recovery efficiency is up to 94% in general ventilation systems and over 95% when used in swimming pools. Air consumption - from 2600 to 31,000 cubic meters per hour. The lower threshold of external temperature for use in swimming pools without preheating is –30 °C.

To reduce efficiency in defrost mode, the heat exchanger is transformed from counterflow to crossflow.

In addition to the unique recovery system, the presented ThermoCond 38 unit is distinguished by:

• the latest corrosion-resistant housing, automation on a digital bus with electronic access of all components, energy-efficient fan group with electronically commutated motors, capable of operating in a humid, salty environment. All components inside the case are rated IP66 against dust and moisture.

The stand will also feature a compact swimming pool unit ThermoCond 29 with new generation automation. The capabilities of remote dispatching, visualization and control of a running unit will be demonstrated.

In addition, the exhibition will feature the premiere of a fundamentally new series of compact pool units ThermoCond 18/28.

These and other new products from Systemair can be seen at stand No. 2B18 in the second hall of the second pavilion.

Information provided by the company Systemair

The TRADE GROUP company (Termokul Group of Companies) will present a Russian-made precision air conditioner at the Climate World 2016 exhibition. The Termokul company, together with its partner, the Italian manufacturer HiRef, is launching a line of inter-row air conditioners of the TKKP VR series in 2016.

Air conditioners with cooling capacity from 10 to 70 kW are manufactured from components from leading European manufacturers using modern innovative technology. The quality of the equipment is confirmed by the declaration of conformity of the Customs Union.

Information provided by the company

The company "TRADE GROUP" (GC "Termokul") together with the Czech leader in the production of textile air ducts - the company "Prihoda s. r.o." will present for the first time at the exhibition “CLIMATE WORLD 2016” a new series of SquAireTex diffusers.

For its professional activities, the company Prihoda s. r.o." has accumulated enormous experience in the development, production and implementation of textile air distribution systems at food industry facilities, warehouses, sports complexes, prefabricated tent structures, data centers and many others.

SquAireTex diffusers are fundamentally different from products known today. Flat diffuser designs are designed for installation in suspended ceilings. By using textile materials and special guide pockets, Prihoda has achieved equal or improved technical parameters compared to traditional tin swirl diffusers and anemostats.

The advantage of SquAireTex diffusers is their reasonable price, quick installation, various colors and washability. Depending on the achieved air flow power, they are divided into 3 main types: Swirl, Flow and Micro.

You can get acquainted with textile air ducts at the stand of the exclusive distributor of Prihoda in Russia and a number of CIS countries - the TRADE GROUP company (Termokul Group of Companies) at stand 2B28, pavilion No. 2, hall No. 2 from March 1 to 4, 2016 at the Expocentre Fairgrounds "

Information provided by the company "TRADE GROUP" (GC "Termokul")

The premiere of the new model of the household split system CHIGO will take place in Russia

The first batch of household split systems CHIGO model CS-***169 was produced exclusively for the Russian market.

The internal block of the model has an elegant classic design. The display is “hidden” in the front panel and is not visible when turned off.

Split systems are equipped with inverter-controlled compressors, a cold catalysis filter, an anion generator, and have a three-dimensional air distribution function.

The power of air conditioners is from 2.5 to 7 kilowatts.

Information provided Termokul RUS LLC -

Available technologies from CHIGO

In 2016, CHIGO presents to the Russian consumer a new household split system CS-***145 with the ability to control via Wi-Fi.

The company's engineers and designers managed to create an ultra-modern compact model of the indoor unit and at the same time maintain the high energy efficiency of the system. The model is equipped with a modern set of air filters.

Information provided Termokul RUS LLC - exclusive distributor of CHIGO"

New generation of BRC control panels for Ballu air curtains

In the 2015–2016 season, all Ballu air curtains are equipped with new BRC electronic control panels.

Among the main advantages of the new remote controls are an increase in the accuracy of the electronic thermostat to 0.5 °C, an expansion of the set temperature range, the ability to connect a remote temperature sensor, a limit switch, a mixing unit valve drive, as well as a built-in engine shutdown delay and LED indication of operating modes. The switching current increased to 10 amperes allows you to connect several air curtains to one remote control at once.

The remote controls are easy to install; connection is possible both from the rear - for hidden installation, and from the side - for overhead installation.

The remote controls are available in modifications BRC-E for curtains with electric heating and BRC-W for curtains with a water heat exchanger and without heating. Each remote control can additionally be connected to an energy-efficient BRC-C control unit, which allows the curtains to be used in energy-saving mode with automatic performance control depending on the opening and closing of protected openings and changes in room temperature.

All BRC remote controls are designed and manufactured in Europe in accordance with international standards, have high-quality modern components and stand out from their analogues in their high reliability and wide functionality.

Information provided TPH "RUSKLIMAT"

In the 2016 season, the Ballu Industrial Concern, one of the world's largest manufacturers of climate control equipment, introduced a new air humidifier in the Ballu Kids line - Ballu UHB 280 Mickey Mouse, inspired by the popular animated character Mickey Mouse.

The new product was created jointly with Disney designers and artists and is designed to take care of the health of babies from the first days of life. The water tank is equipped with a convenient folding handle for carrying. Special anti-slip feet eliminate the possibility of accidental movement of the device and reduce the risk of falling from a horizontal surface. A convenient external adapter allows you to connect the humidifier to the electrical network only when necessary, and use it as a decoration for the children's room the rest of the time.

The humidifier is equipped with a low water level indicator and an automatic shutdown function in the absence of water. The device is absolutely silent, does not disturb the child’s sleep and is economical in energy consumption.

The device is controlled manually using a regulator.

The tank volume - 3 liters - is enough to continuously humidify the air in a child's room for 15 hours. Thanks to the included filter cartridge, you can fill the tank with tap water without fear of a white coating appearing on the furniture.

Information provided TPH "RUSKLIMAT"

New level of comfort Ballu SMART

In 2016, the Ballu Industrial Concern introduced a new series of electric storage water heaters Ballu SMART with the possibility of universal installation. The series devices can be installed both vertically and horizontally.

The internal tanks of the new product are made of stainless steel with a high content of nickel and chromium. Modern LED displays show the water heating temperature, and a convenient adjustment knob allows you to set temperature parameters with an accuracy of 1 °C. The flat shape and versatility of installation make SMART water heaters ideal solutions for apartments of any layout.

To control the device via a mobile application from anywhere in the world, it is possible to additionally purchase a Wi-Fi module. Now, no matter where the user is, he will always be able to program the water heater to the desired operating mode, so that when he returns, the device will already have hot water.

The new series features an ECO-technology mode, which allows you to increase the operating life of the heating element: water is heated only to + 55 ° C, while it is disinfected and practically no scale is formed.

Water heaters of the SMART series are made in an elegant modern style and fit organically into any interior. The models are presented in two colors - classic white and textured metal color.

All models are reliably protected by a multi-level security system and have effective thermal insulation.

Information provided TPH "RUSKLIMAT"

The industrial concern Ballu presents the innovative supply and purification multi-complex Ballu Air Master.

Air Master is both a professional air purifier that maintains ideally clean indoor air and a compact supply ventilation unit that provides fresh air from the street.

A unique six-stage cleaning system eliminates 99.9% of airborne contaminants: High-Density prefilter traps fluff and insects, BASIC class F5 fine filter eliminates pollen, fungal spores and mold, high-efficiency HEPA filter class H11 traps the smallest highly allergenic dust, microorganisms and smog particles. The carbon filter eliminates unpleasant odors. An ultraviolet lamp neutralizes microorganisms and sterilizes the air, and a cold plasma generator deactivates microorganisms, preventing their proliferation inside the device.

Ballu Air Master has five speed modes and is capable of supplying up to 200 cubic meters of air per hour, ensuring a comfortable stay for up to seven people in a room of up to 75 square meters.

The built-in CO 2 sensor detects the concentration of carbon dioxide and, by controlling the inflow valve, ventilates the room when necessary. The dust sensor monitors the concentration of particles in the air, adjusting the intensity of cleaning in circulation mode. When cold weather sets in, the highly efficient PTC heating element automatically heats the incoming air to a comfortable temperature. The supply and purification multi-complex is designed for year-round operation at ambient temperatures from –40 to +50 °C.

The Wi-Fi function allows you to control the device using a smartphone from anywhere in the world.

Installation of the Air Master device is carried out using the “clean installation” technology using special equipment directly on the final finish. Installation under standard conditions takes no more than an hour.

Information provided TPH "RUSKLIMAT"

The design of the new Electrolux Sensomatic Pro instantaneous water heater is the embodiment of the modern idea of ​​functional household appliances. The device has a compact size, is equipped with an LCD display with indication of heating temperature and water flow and intuitive touch controls.

An automated control system regulates all the main parameters of the water heater and maintains the water temperature in the range of 30–60 °C, eliminating differences when pressure changes. The temperature settings programming function allows you to set individual operating modes for all users. “Children's mode”, which ensures that the water in the device is heated to no more than 36 °C, guarantees maximum safety for the child.

The water heater is equipped with a spiral heating element made of stainless steel, the special design of which prevents scale deposits on it.

Electrolux Sensomatic Pro has a multi-stage safety system: overheating protection, a self-diagnosis system and air lock detection.

Water heaters are available in two models, which differ in heating speed. During installation, the consumer himself selects the required power. These are 12, 15 or 18 kilowatts for one model and 18, 21 or 24 kilowatts for the second. Both models are connected to a three-phase power supply network and also serve several water collection points. This is a universal professional solution for offices and country cottages, as well as for restaurants, hotels, beauty salons and fitness clubs.

Information provided TPH "RUSKLIMAT"

The Electrolux EHU 3715D ultrasonic air humidifier is the first device of this type on the Russian market, equipped with the Relax Therapy relaxation lighting function.

Periodically changing the color of the backlight has a calming effect, helping to relieve stress and improve your emotional state.

The new product has an original design and wide functionality. You can control the humidity in the room using convenient touch buttons on the control panel or using the remote control. All main parameters of the humidifier are displayed on the display.

Special SMART modes allow the device to independently determine microclimate parameters and maintain the humidity level in the room.

For user convenience, the device has a built-in weather station.

The safety of the steam coming out of the device is ensured by the innovative three-stage Bio-Cop air purification system, which includes pasteurization of water at a temperature of 80 °C and sterilization of steam with an Ultraviolet Pro ultraviolet lamp. The humidifier tank is made of special antibacterial plastic, which prevents the formation of harmful microorganisms.

In addition, the humidifier is equipped with a negative ion generator.

The water tank capacity is 5 liters, which allows the device to continuously humidify the room throughout the day.

Information provided TPH "RUSKLIMAT"

New features and capabilities of the DC inverter multi-split system Super Match ERP

The updated free-layout multi-split system Super Match ERP from Electrolux in 2016 became 35% more powerful and 20% more economical.

The Super Match ERP multi-split system from Electrolux with DC inverter control has the ability to connect several indoor units of different types and power at once and allows you to create a comfortable microclimate in rooms with a total area of ​​20 to 230 m2.

Unlike the previous system, this year's new product has a higher energy efficiency class SEER (A++). And thanks to the introduction of innovative developments, one 56,000 BTU outdoor unit can now connect up to 9 indoor units simultaneously. At the same time, the consumer is not limited in the choice of power and types of indoor units and can use over 500 different system combinations: duct, cassette, floor-ceiling and wall split systems.

For the convenience of users, the internal units of DC-inverter split systems have also been improved. Cassette-type units are now compact in size and can be installed in Armstrong-type suspended ceilings. And wall-mounted split systems are represented by the Super DC inverter Monaco, which has proven itself on the market.

All external units used in the multi-split system are equipped with a new generation compressor with DC-inverter control, which has high energy efficiency (SEER = 6.1) and accurate temperature maintenance. The use of new compressors made it possible to increase the maximum length of routes between the outdoor and indoor units to 145 m, and the height difference to 30 m, which significantly expanded the possibilities for choosing the installation location of the outdoor unit. The internal units of the Super Match ERP inverter multi-split system can not be connected immediately, but in stages, according to the design principle, starting with one or two.

The Super Match ERP multi-split system operates in a wide range of external temperatures: from –15 to +48 °C in cooling mode and from –20 to +24 °C in heating mode, which allows you to effectively heat rooms in winter and in the off-season (SCOP = 4.0). The noise level of the indoor unit does not exceed 23 dB (A), which guarantees comfortable operation of this split system both in domestic and commercial premises.

Information provided TPH "RUSKLIMAT"

Season premiere: Electrolux's advanced 7500 BTU Super DC Inverter

In 2016, the popular Electrolux series of air conditioners - Monaco Super DC Inverter was expanded with the appearance of a new model of an improved modification.

The model is designed for cooling rooms with an area of ​​10 to 20 m2, which makes it universal for all standard apartments. Previously, buyers had to buy air conditioners with a cooling capacity of 9,000 BTU even for small rooms, paying extra money for it. The new model made it possible to satisfy the wishes of all categories of users of Electrolux household climate control equipment.

Another key advantage of the updated model is its high seasonal energy efficiency class. When the air conditioner is operating for cooling, SEER = 6.1, which corresponds to class A++ according to the European classification. When operating for heating, SCOP = 5.1, which corresponds to class A+++.

Compared to traditional inverter split systems, Monaco Super DC Inverter consumes 30% less electricity and is more stable. In standby mode, power consumption is only 0.5 W.

Unlike most split systems on the market, Monaco Super DC Inverter operates over an extended range of external temperatures. The device is capable of effectively heating a room at an outside air temperature down to –22 °C, not only in the off-season, but also in winter. Working on the principle of a heat pump, the Monaco Super DC Inverter consumes less than 200 W of electricity for every kilowatt of heat, which is 5 times more efficient than household electric heaters.

The new product operates extremely quietly (23 dB (A)) and can be installed in bedrooms and children's rooms.

The device is equipped with a carefully thought-out control interface and an optimal set of useful functions, including blinds position memory.

The design of the internal unit also deserves attention - the expressive smooth lines of the body emphasize the elegance of the device and make the Monaco Super DC Inverter especially attractive to connoisseurs of fashionable interior solutions.

Information provided TPH "RUSKLIMAT"

In 2016, the industrial concern Ballu expanded the design line of the innovative generation of Platinum series inverters with a new DC inverter split system Black Edition in a unique “black velvet” design.

The elegant and respectable DC Inverter Platinum Black Edition is distinguished by a noble appearance, perfectly quiet operation and a maximum range of functions. The indoor unit of the air conditioner is made in a stylish modern design, and its surface is made using Black Velvet technology, which gives the device a unique texture.

Thanks to the latest architecture of the indoor unit, all housing elements are a single whole. The one-piece body eliminates cracking of the plastic due to temperature changes and natural expansion of materials and guarantees impeccably quiet operation of the air conditioner. The minimum noise level is only 21 dB(A).

More accurate maintenance of the set temperature is guaranteed by a modern DC-inverter compressor manufactured using Japanese technology. The key characteristics of the technologies used were higher cooling capacity (2.8 kW) and low energy consumption. The Platinum series line corresponds to the high energy efficiency class A.

The air conditioner works effectively for both cooling and heating during the off-season. The minimum outside temperature when operating in heating mode is –15 °C.

DC Inverter Platinum Black Edition is equipped with a multi-stage air purification system, which includes four components: a catechin filter, a fine mechanical HEPA filter, a vitamin C filter and an aroma filter. The built-in ionizer improves air quality, increases the amount of anions and equalizes the balance of charged particles in the room.

The feeling of absolute comfort is created by the I Feel high-precision temperature operating mode, as well as the ability to independently select the direction of the air flow using the remote control.

Ballu provides a maximum warranty of 5 years on the compressor for the entire line of Platinum series split systems.

Information provided TPH "RUSKLIMAT"

In the 2016 season, the innovative Transformer System concept was implemented in the Electrolux electric convectors of the Rapid and Air Gate 2 series, beloved by end consumers. The new technology is revolutionizing the home heating market, introducing a completely new approach to the traditional convector. The application of the Transformer System concept allows consumers to independently choose the equipment of the device depending on the required functions and not overpay for unnecessary elements.

The individual configuration of the Electrolux convector can now be selected directly in the store. The manufacturer offers three control units: mechanical, electronic and electronic with inverter technology. The patented design allows the user to install the control unit on the heating module in two clicks. Additionally, the convector can be equipped with accessories for floor installation, a Wi-Fi module for controlling the device using an application for mobile devices, as well as a smart eye module with a built-in presence sensor to reduce energy consumption.

Particularly noteworthy is the Digital Inverter control unit, which uses inverter technology protected by international patents that changes the power of the heating element depending on the difference between the actual and user-set temperatures. Every 10 seconds, the convector measures the room temperature and selects the optimal power. The use of inverter technology in a convector allows you to save up to 30% of electricity compared to standard convectors, significantly reduces the load on the power grid and ensures high accuracy in maintaining the set temperature.

Thanks to the use of modern technologies and innovations, the official warranty period for Electrolux Transformer System convectors has been increased to five years.

Information provided TPH "RUSKLIMAT"

In the 2016 season, the Zanussi line of household air conditioners was replenished with a new flagship model - Venezia DC Inverter with Wi-Fi technology.

The Venezia DC Inverter split system is a true embodiment of interior fashion, corresponding to the latest trends in industrial design. The new product attracts attention with an unusual solution for the indoor unit. The texture of the front panel of the air conditioner is made using diamond-shaped embossing, which makes it possible to achieve an expressive relief pattern. The air conditioner successfully harmonizes with any modern interior and advantageously decorates the space around it.

Wi-Fi technology allows you to control the operation of the air conditioner remotely using the Internet. The user can turn the device on or off, change the operating mode, or set the required room temperature while being far away from home. To do this, just install the necessary application on a mobile device based on the IOS or Android operating systems.

To ensure comfortable air temperature, the DC Invertr split system provides smooth distribution of air flows in four directions. The blinds are controlled using a remote control: right, left, up and down.

The Follow Me function allows you to set and maintain the required temperature at the location of the remote control.

A high-density HD filter and an ionization function that promotes the production and circulation of negative ions are responsible for air purity.

Thanks to inverter control, the device saves up to 30% of consumed electricity, working effectively for cooling and heating at outdoor temperatures down to –15 °C. During the off-season, the air conditioner can be used to heat the room. The energy efficiency of the Venezia DC Inverter split system corresponds to a high class “A”. The model is equipped with a four-speed indoor fan, which, when switched to a special quiet mode, ensures perfectly quiet operation of the air conditioner (21 dB (A)).

Information provided TPH "RUSKLIMAT"

In 2016, the Zanussi range of water heaters expanded with a series of devices with a stainless steel tank. The models in this series - Splendore and Splendore XP - are distinguished by their elegant design, universal installation and high performance characteristics.

The Splendore XP model is distinguished by a multi-color LCD display and the possibility of remote control using the built-in Wi-Fi module. Splendore is equipped with a convenient mechanical control panel.

Stainless steel with a high content of anti-corrosion elements and a special technology for manufacturing the seams of the internal tank using Program Control automated argon welding create maximum protection of the water heater from corrosion, which is especially important when the quality of tap water is poor.

New materials and welding technology enable Zanussi to provide a record 8-year warranty on the inner tank.

The devices are available in two colors - classic white and elegant silver.

The possibility of horizontal and vertical installation and the flat shape of the tank solve the problem of choosing a place for installation.

In the new series of water heaters, much attention is paid to energy saving issues: the devices provide an economical mode for heating water up to 55 °C and a half-power function. A convenient timer with delayed switching on in the Splendore XP model allows you to program the device to switch on at a certain time, which significantly reduces energy costs.

All models are equipped with a residual current device (RCD), a multi-level safety system (against dry heating, overheating, exceeding the norm of hydraulic pressure) and have effective thermal insulation.

The series is represented by devices of the most popular capacities: 30, 50, 80 and 100 liters.

Information provided TPH "RUSKLIMAT"

The palette of Electrolux modern electric fireplaces has been expanded. Now, in addition to the classic black model, customers can purchase electric fireplaces in three new colors - white, red and orange.

Electrolux electric fireplaces are equipped with an innovative Real Fire Perfect flame imitation system. All decorative elements - firewood and stones - are painted by hand, which allows them to convey their texture more accurately and realistically.

The front instrument panel is made of high-strength tempered glass. The thickness of the body - 13.5 centimeters - allows you to fit the fireplace into any interior. The devices are easy to install and safe to use.

The inside of the fireplace body is lined with metal heat-repellent plates. Thanks to this design, the case does not overheat and can be touched without the risk of burns.

Each model is equipped with a simple and convenient control panel and remote control. Safety sensors turn off the device when the maximum permissible temperature is reached.

The heat transfer function is turned off, allowing you to enjoy a realistic picture of a “live” fire even in the hot summer.

Information provided TPH "RUSKLIMAT"

At the exhibition “CLIMATE WORLD - 2016” NPO Teplomash CJSC will present the direct-flow air-heat curtain “Column Brilliant” and the air-heat air curtain of the mixing type “Brilliant Mini”. The design of the stainless steel cases of both new products resembles a diamond cut.

The “Column Diamond” curtains, 2 and 2.4 meters high, will be manufactured with both electric and water heating sources. The effective length of the air stream of the new “Columns” is up to 3.5 meters. Thanks to a well-thought-out design design and direct-flow air movement, the “Brilliant Column” can be placed directly at the doorway.

The new air-thermal curtain of the mixing type “Brilliant Mini” is distinguished by its small dimensions - 800×150×160 mm.

“Brilliant Mini” can be used as a shut-off curtain for windows of retail pavilions, as a mixing curtain in entrance vestibules and as a fan heater for a stationary installation.

Information provided by the company "Teplomash"

Testo, a recognized market leader in portable and stationary measuring technology, has expanded its range of digital solutions with new testo Smart Probes. This is a series of compact probes for a smartphone or tablet, controlled via a free mobile application.

The testo Smart Probes range helps you solve any problem that requires measuring temperature, humidity, pressure and air flow. Special kits for refrigeration, heating, ventilation and air conditioning systems will make the work of specialists more convenient and efficient. The kits are supplied in a compact case.

The series includes eight measuring instruments that connect to a smartphone or tablet via Bluetooth.

The measured values ​​can be displayed on the screen of a mobile device in digital form, in the form of a table, and also in the form of graphs. Based on the results of your work, you can generate a document in PDF or Excel formats.

Special measurement modes include testing for pressure drop in heating systems, setting the geometry and dimensions of the ventilation grille and duct cross-section to measure air volume flow, and calculating various parameters such as superheating and subcooling in refrigeration systems.

For refrigeration, ventilation and heating engineers, Testo offers special kits at competitive prices. Each kit includes a case with a set of corresponding devices.

Information provided by the company "TESTO Rus"

At the exhibition "CLIMATE WORLD - 2016" the CHERBROOKE company will present a designer series of household air conditioners Aeronik Smile.

A special feature of the series is replaceable inserts into the front panel of the indoor unit in white, silver and golden shades.

Among the functions implemented in the split system are a hidden display, operation in cooling, heating, dehumidifying and ventilation modes, “night mode”, the ability to set a timer, “Auto-restart”, “I Feel” functions.

The series is represented by models with productivity from 2.1 to 7 kilowatts.

Information provided by the company CHERBROOKE

New models of Green IG series inverter split systems are distinguished by high efficiency and reliability, modern design and attractive prices.

A powerful and energy-efficient air conditioner using DC-Inverter technology, equipped with an informative LED display, a fan with five rotation speeds, and a set of filters. The new product includes the functions “Auto-restart”, “I Feel”, and adjustment of the position of the blinds.

In total, the series includes four models of energy efficiency class “A” with cooling capacity from 2.2 to 4.6 kilowatts.

The new product can be seen at the exhibition “CLIMATE WORLD - 2016”.

Information provided by the company CHERBROOKE

The Russian company Tropik-Line, a manufacturer of air curtains, presents a new series of highly efficient air curtains, the D series.

These two-jet curtains with combined heating will significantly reduce operating costs. Thus, the D410E15 model, consuming only 10 kilowatts of electrical power, is not inferior in characteristics to the T414E15 model, consuming 14 kilowatts.

The new series of curtains combine stylish design with high energy efficiency. The maximum possible installation height of the new Tropik-Line D series thermal curtains is up to 4 meters.

The principle of operation of the new curtains is described in detail in the article “The Efficiency of Air Curtains”, published in issue No. 90 of the Climate World magazine.

Information provided by the company Tropik-Line

Tropik-Line presents a series of ceiling curtains

In the 2016–2017 season, Tropik-Line launches a series of built-in ceiling curtains.

Thermal curtains installed directly in a suspended ceiling are similar in their characteristics to devices of the T400E series. If necessary, the visible part of the curtain can be painted in a color that matches the interior design of the room. The new product is ideal for installation in rooms where it is important to preserve the interior or where it is technically impossible to install a conventional thermal curtain over the door.

Information provided by the company Tropik-Line

In the new season, Tropik-Line has updated the design and expanded the range of A-series thermal curtains.

The appearance of the curtains has become more stylish and original, and the series has been replenished with the A2 household model, equipped with a power cord and not requiring the services of a qualified electrician for connection.

Information provided by the company Tropik-Line

The Tropik-Line company has begun production of high-speed industrial thermal curtains of the X800E10 series with electric heating for openings up to 8 meters high.

Curtains with two flow rates and three degrees of heating are capable of creating an air flow with an intensity of up to 7350 cubic meters per hour and have a heating power of up to 36 kW per 1 meter of opening width.

Like all Tropik-Line industrial air curtains, the X800E10 series air curtains can be ordered in the standard white version, as well as in Zinc and Techno versions.

Information provided by the company Tropik-Line

New series of Tropik-Line air curtains for openings up to 9 meters high

Tropik-Line curtains of the X900A series without heating allow you to protect openings up to 9 meters high.

The air flow speed in the series curtains is up to 100 km/h, which allows them to be used in high openings of warehouses, depots, and exhibition pavilions.

The high-speed air flow will reliably protect the opening from external air, and when used in combination with heated curtains, it will allow significant savings on room heating.

Information provided by the company Tropik-Line

At the exhibition “CLIMATE WORLD - 2016”, the Potok Inter company will for the first time present an autonomous air disinfection unit “Potok 300”, manufactured according to the latest industrial design.

The Potok 300 installation is distinguished by the highest level of air disinfection, ergonomics, and modern appearance. It is intended for use in medical institutions, airports, train stations, office centers, fitness rooms, beauty salons and, of course, at home. Air consumption is 300 cubic meters per hour, power consumption is no more than 150 volt-amperes. Dimensions - 460x535x1040 millimeters.

The uniqueness of the Potok bioinactivation technology is confirmed by patents from Europe, the USA, Japan, and South Korea. Its main difference from the technologies presented on the market is that first inactivation (destruction) of microorganisms occurs and only then highly efficient filtration of inactivated biomass and aerosol particles. As a result, Potok equipment ensures the inactivation of all types of pathogenic microorganisms and viruses with an efficiency of at least 99%. The possibility of their reproduction and accumulation on filters is excluded, and there is also no risk of subsequent release to the outside.

In addition to the new product, the company will present an autonomous recirculation unit “Premier” and a duct-type unit in a single external housing “Potok 150-M 01”.

The Potok technology is absolutely safe for humans and the environment, has record low power consumption (from 10 to 40 W), and does not require consumables or special disposal. If the equipment has a service life of 10 years, the warranty period is 5 years.

“Potok” air disinfection installations have been tested and recommended for use by the largest clinical centers in Russia and foreign scientific institutes: Federal Research Center of Epidemiology and Microbiology named after N. F. Gamaleya, Institute of Virology named after D. I. Ivanovsky of the Russian Academy of Medical Sciences, Central Research Institute of Tuberculosis of the Russian Academy of Medical Sciences, Research Institute of Epidemiology and Microbiology named after . Louis Pasteur, Universidad de Granada, Harvard University School of Public Health and others.

Information provided by the company "Stream Inter"

The Promservice company (Dmitrov) has mastered the production of frameless standard central air conditioners KTsZM with an air capacity of 7,000–250,000 cubic meters per hour. In terms of overall connection dimensions and technical parameters, they correspond to the KD, KT, KTsZ air conditioners produced in the USSR, which makes it possible to replace worn-out devices with new ones without interfering with the structure of buildings.

The panels of air conditioners and supply chambers based on them do not require additional thermal insulation during installation; they are already insulated with a mineral plate and lined with galvanized steel. The panels are packaged in compact bundles and transported to the installation site by any type of transport. They are also easy to move in normally cramped ventilation spaces.

KTTSZM air conditioners use equipment of an expanded range, mass-produced in Russia. Its cost is 30–50% less than that of products from companies that produce their own brands of air conditioners. In addition, this approach relieves the consumer of dependence on a single manufacturer and the risk of cessation of supplies of spare parts and components.

Information provided by Promservice company

Specialists of KVM Production Association LLC have developed and put into mass production a radial roof fan for exhaust smoke ventilation with a highly efficient aerodynamic design VENK-DU with a capacity of up to 110 thousand cubic meters per hour.

Air discharge can be carried out vertically (model VENK-V) or in two directions (VENK-S).

The design of the device makes it possible to fit it into any architectural form.

Fire dampers KVM-P

To fully complete smoke ventilation systems, the production of fire dampers of the KVM-P type (multifunctional fire-fighting ventilation valves) has begun: normally open, normally closed, double-acting and smoke. Fire resistance of valves - EI90, EI120. Rectangular valves have sizes from 100x100 to 1500x1500 millimeters, the diameter of round valves ranges from 200 to 1500 millimeters in increments of 50 millimeters.

Fire protection nozzle curtain SWAP

KVM Production Association LLC began mass production of SVAP nozzle fire curtains with a capacity of 3,000 to 9,000 cubic meters of air per hour. The air speed at the exit of the curtain is 10 meters per second. The curtains provide protection for openings up to 8 m wide.

New version of the program for calculating smoke ventilation systems KVM-Dym

For the convenience of the work of specialists from design organizations, based on the VNIIPO 2013 methodology, a program for calculating exhaust and supply smoke ventilation systems “KVM-Dym” has been developed. The program is distributed free of charge.

Information provided by the company "Production Association KVM"

In 2015, Armacell developed a new high-quality set of tools for measuring, cutting and gluing Armaflex elastomeric insulation materials.

The Toolbox set consists of four knives with steel and ceramic blades. In addition to them, the set includes a sharpening stone and a case for attaching the knife to a belt. For the convenience of cutting the material, the case contains a caliper and a compass with a holder adapted for using a pen or marker, a folding meter and a template for making bends. To cut holes in the thermal insulation, a set of punches of different diameters is provided, complete with a deburring tool. For ease of installation, instructions, rags, a glue pump and two types of brushes of different sizes are provided. The set is packaged in a lightweight but durable aluminum case.

Information provided by Armasell company

New generation of equipment based on the air refrigeration cycle from DETA Engineering

The high-tech air cycle turbo refrigeration machine “DETA Kholod” solves the problems of industrial and commercial refrigeration in the temperature range from –50 to –80 °C. Atmospheric air used as a refrigerant is available, environmentally friendly and safe to use.

Stable maintenance of relative humidity at a refrigeration supply facility at a level of 0–5% eliminates the need for defrosting (removing frost), and the complete absence of oils and other flammable materials reduces operating costs and risks. "DETA Cold" has a low noise level and demonstrates high energy efficiency.

The small dimensions of the machine, ease of installation and functionality of the control system (smooth control of cooling capacity from 30% to 100%) take the efficiency of refrigeration supply to a new level.

Another advanced development of the Russian engineering company "DETA Engineering" - the air microclimate system "DETA Climate" - is a multi-mode heat engine that works as an air conditioner in the summer, and as a heat pump in the winter. If necessary, DETA Climate can operate in ventilation mode, as well as connect to water heating and provide hot water supply.

The main advantage of the system is a 100% supply of fresh supply air. The absence of noise and vibration from the machine allows it to be placed directly indoors. The microclimate system is used for air conditioning and heating of private houses and cottages, as well as shopping centers, cinemas, catering establishments, warehouse complexes, and gyms.

Information provided by DETA Engineering

Munters, a leader in the production of adsorption dehumidification systems, evaporative humidification and air cooling, will present at the CLIMATE WORLD - 2016 exhibition a line of evaporative autonomous humidifiers HM3 of the Humimax series.

The most compact unit will be presented at the exhibition - HM3 2000 with an air flow of 2000 cubic meters per hour. Also in the Humimax HM3 line there are models with an air capacity of 5000 and 10000 cubic meters per hour.

The units are delivered to the consumer completely ready for connection, they are easy to install, and the start-up procedure is simple and well thought out. The big advantage of the entire Humimax series is that there is no need for a water treatment system. Minerals and contaminants remain in the humidifier and are then washed away when drained.

Humimax HM3 models allow you to provide the required level of humidity with low energy consumption, as well as carry out its automatic control, and at the same time are very easy to maintain, have a low noise level and an attractive appearance.

The key difference of the new line is the control system on the Climatix platform, using the Modbus communication protocol.

The Humimax series will help eliminate static electricity in data centers and server rooms, and prevent damage to valuable exhibits in museums and art galleries. Humidifiers of this series are widely used in the woodworking, furniture, food industries and printing houses.

At the exhibition “CLIMATE WORLD - 2016” HM3 humidifiers can be seen at the stand of Roxor Industry CJSC (2B1903, second pavilion of hall No. 2).

Information provided by Roxor Industry CJSC - the official distributor of Munters in Russia (www.roxorindustry.ru )

In the wake of an active import substitution program, the UNIO-VENT company organized the production of Russian fan heaters under the GREERS brand.

The fan heaters are manufactured using European technologies and are equipped with everything necessary for reliable operation. The devices have a three-speed motor, which significantly reduces the cost of purchasing controls - one TS thermostat is enough. The body is made of black polypropylene foam. The mounting console is included as standard equipment. The built-in tray for collecting condensate allows you to use the devices in cooling mode. Equipment warranty - 5 years.

Information provided by the company "UNIO-VENT"

Les Trovac (Canada), a manufacturer of built-in vacuum cleaners TM Cyclovac, has developed a new modification of the mounting frame for the Hide-A-Hose system (“invisible hose”).

The RetraFlex frame for the “invisible hose” system makes installation even easier and more convenient: the reliable design of the socket assembly does not allow building materials to enter the system during further finishing. The built-in adjustable extension makes it possible to install the socket even when the thickness of the finishing finish changes up to 2 centimeters. For the new frame, a series of RetraFlex rosettes with original designs are available in four colors: white, black, antique copper and stainless steel.

Information provided by ECOWAC SYSTEMS

Climaveneta, a European leader in both comfort and precision air conditioning, is launching a new range of ACCURATE2.0 chilled water air conditioners for data center cooling.

In the ACCURATE2.0 line, Climaveneta uses highly efficient heat exchangers and fan sections. The heat exchangers are modified to work with very high temperature coolants. While maintaining the same dimensions, the heat exchange surface area has been increased to provide better performance and reduced pressure loss.

ACCURATE2.0 models use ultra-lightweight polymer EC fans to reduce power consumption by up to 25%.

The main difference of the new line is the EXPANDED modification with two independent modules, one for heat exchangers, located above the raised floor, and the other, with a fan section, below it.

Modifications with updated heat exchangers and expanded layout are ideal for refrigeration systems with free cooling function.

The devices are available in two different versions, with single or double circuit, and the ACCURATE2.0 models range in cooling capacity from 4 to 235 kilowatts.

TECS-FC - special chillers for special projects

The high performance of the new highly efficient TECS-FC chillers with free cooling function (free cooling) from Climaveneta is ensured by efficient oil-free compressors with a magnetically suspended shaft and an economizer, an electronic expansion valve, flooded evaporator and EC fans.

The units are designed for outdoor installation and operate on R134a refrigerant.

The range of cooling capacity of the TECS-FC family is from 302 to 1649 kilowatts, the line is represented by 13 models in two versions: compact (K) and highly efficient (CA). The units are supplied fully charged after mandatory testing at the factory. Upon request, the chillers are equipped with a built-in hydraulic module.

In the event of a power outage, the compressors restart within 26 seconds. A cooling capacity of 1000 kilowatts is achieved within six and a half minutes after the voltage drop.

Dual power inputs ensure high reliability and make TECS-FC suitable for TIER III and TIER IV data centers.

Information provided by Climaveneta

At the international specialized exhibition "CLIMATE WORLD - 2016", the Fitting Atelier company will present a unique development - heating glass that can replace any heat source in premises for various purposes.

This technology, created by the company’s engineers based on its own developments and research from world experience, has no analogues comparable in characteristics on the modern market.

Thermo Glass heating glass operates from a 220-volt power supply and heats up to 55 C, providing an optimal indoor microclimate. A special coating of metal oxides is responsible for heating. The heating temperature is controlled using a special control panel.

The material is universal in application: it is used to create windows, panoramic structures, doors, skylights, winter gardens, glazing of swimming pools and other rooms with high levels of humidity. Glass has selective properties - in cold weather it reflects heat back into the room, and in hot weather it does not let the heat inside. Thermal hardening provides high strength to the material.

Infrared heating technologies are rapidly gaining popularity. The market is saturated with various models of IR heaters, but the developments of the Fitting Atelier company stand out significantly from their background. Unique glass heaters have no analogues in the world. The line includes several series: from interior devices to industrial models.

In 2016, the company introduced a new model - glass floor heater PION N-06. It can be used for additional heating of the room and for local heating.

PION Thermo Glass N-06 operates from the mains and has a power of 600 W; its main advantage is combined heat transfer: infrared radiation is combined with convection flow. The main element of the heater is a radiating surface made of tempered glass, capable of withstanding high temperatures and mechanical loads. The stability of the structure is ensured by special legs. Settings are made using the control unit.

In addition to excellent technical characteristics, the device has an unusual appearance, turning the heater into a fashionable element of the interior.

Information provided by Fitting Atelier

The new RadiPac range of EC centrifugal fans features an impressive efficiency of well over 60%. This was achieved by optimally adapting the impeller, motor and electronics to each other.

The GreenTech external rotor EC motor used in the design is a synchronous motor with a wide supply voltage range. Depending on the version, the engine can be connected to a network with voltage from 220 to 480 volts. The energy efficiency of the motor significantly exceeds the parameters of the IE4 class, which is achieved without the use of rare earth magnets. The electronics and motor together form one unit - this not only saves space, but also ensures ease of installation. In this case, the built-in switching electronics system replaces the external frequency converter. The fan rotation speed is controlled using an analog signal 0...10 volts or a digital MODBUS interface. There is no need for additional electronic filters or shielded cables.

The aerodynamically optimized impeller with integrated diffuser is mounted directly on the motor rotor, saving space and balancing the entire rotating assembly, which reduces the load on the bearings and increases their service life. The special profile of the blades made it possible to increase the efficiency of RadiPac fans by more than 13%.

Using the mounting panel, the fan can be easily installed on the wall of a device with a horizontal or vertical motor shaft.

Today, the new RadiPac fans are available in versions with outer diameters from 250 to 560 millimeters. In the near future, the diameter range will expand to 1000 millimeters.

Information provided by the company "EBM-PAPST RUS"

A new look at water heaters from ROYAL Clima

In 2016, the ROYAL Clima company presents flat storage water heaters of the DIAMANTE Collezione and DIAMANTE Inox Collezione series, developed together with leading European design bureaus.

The exclusive Diamond control panel, made in the form of a black crystal, is equipped with an informative LED display with white indicator lights. With its help, you can choose one of three power modes and a special mode for setting the most comfortable iLike temperature.

Two copper heating elements quickly heat the water, and the thermal insulating material, evenly distributed between the body and the internal tank, does not allow it to cool down for a long time. Replaceable, long-life magnesium anode prevents rust from forming on the inner tank. All series of ROYAL Clima water heaters are equipped with a reliable Security Project system that protects against overheating, excess pressure and leakage, ensuring a high class of moisture and electrical safety.

The pearl matte coating of the tank, in addition to its aesthetic function, protects the body from corrosion.

The internal tanks of DIAMANTE Collezione water heaters, coated with glass-ceramic BIO-enamel, have a volume of 50 or 80 liters. The tanks of DIAMANTE Inox Collezione water heaters are made of ultra-durable Goliath 1.2 stainless steel with a high tungsten content. The series includes models for vertical and horizontal installation with a volume of 30, 50, 80 and 100 liters.

Information provided by the company "BREEZ-Climate Systems"

New products from Systemair at the exhibition “CLIMATE WORLD - 2016” will be presented at stand No. 2B17.

Visitors and exhibitors will be able to see the JET Fan IV centrifugal jet fan, EC-Basic EC fan controller with temperature control option, EC motor fans and smoke extraction equipment.

Among other new products, Systemair will show a line of HELMER fire and smoke dampers developed specifically for the Russian market. The fire damper damper is composed of several fireproof plates, which ensures its high fire resistance. Valve bodies with fire resistance limits EI90 and EI120 have, respectively, a special perforated zone or thermal insulating insert in the plane of the closed blade, which significantly reduces heat transfer from the “hot” to the “cold” part of the body. The line includes valves with fire resistance EI60, EI90, EI120 and E60, E90.

In addition, TOPVEX SF air supply units will be presented at the stand, adding to the TOPVEX line of air handling equipment. The units are completely ready for installation, programmed and tested at the factory. EC fan motors ensure energy-efficient and quiet operation, and the control system allows coordinated operation with an external exhaust fan.

In 2016, the company introduced domestic, commercial and multi-zone Systemair systems to the Russian market, designed to provide comfortable conditions in commercial and residential buildings. The systems are characterized by high efficiency, a wide range of operating temperatures, and impressive remote control capabilities.

Traditionally, the company’s stand will present new products from the Frico brand: panels with hot water supply of the Aquaztrip series for industrial and administrative buildings and a series of hot water fan heaters SWX for use in conditions of high dust, humid or explosive environments, as well as in rooms with temperatures up to 70 ° C.

Information provided by the company