The Kia Rio car began to gain popularity in our country from the early 2000s, and to this day remains one of the most practical sedans successfully sold in the “B” class. Thanks to the pricing policy of the Korean company, the queues for Kia Rio cars were serious. Especially the 2013 and 2014 models, which received a new body. Therefore, it is not surprising that a huge number of cars of this model roam the streets of our cities. Every Kia Rio owner wants to make his car stand out from hundreds of others.
Therefore, more and more drivers are turning their attention to shallow external tuning, and in particular, to replacing standard disks. It seems that everything is simple - I took it and replaced it. But it turns out that loosening wheel rims on a Kia Rio and replacing them with more original ones is not an entirely simple process.
Determination of wheel parameters
Factory specifications for Kia Rio wheels
When choosing rims for the wheels of your car, first of all you should pay attention not to their attractive appearance, but to a number of parameters that they must meet. The main value has always been the wheel bolt pattern. But first you need to know the exact sizes and not get confused with the markings. In principle, everything is simple. All discs have standard markings that correspond to their parameters. All cast and stamped wheels have the same standards. Factory specifications for Kia Rio wheels, depending on the modification, are shown in the table.
The Kia Rio 2013, 2014 car has a disk in the database with the following parameters, which are encrypted in this marking - 6J R15 PCD 4x100 ET48 DIA54.1. This set of numbers and Latin letters says the following:
- 6 – disk width, inches. (parameter B);
- 15 – disk diameter, inches. (parameter D).
PCD 4x100 - indicates the number of holes and the diameter of the circle along which their centers are located. Actually, this is called a bolt pattern. Kia Rio has 4 bolts located along a diameter of 100mm. According to the European standard, this parameter is marked as PCD (Pitch Circle Diameter).
ET48 – disc offset, indicated in millimeters. This parameter is measured between the mating surface of the disk and the center of the disk along its width. If these planes coincide, then the offset of the disk is zero. According to the European standard, the Kia Rio disc has a positive disc offset of 48mm. English manufacturers designate this size as “offset”, and “deport” is its French designation.
Disc offset, just like wheel disc bolt pattern, is a key factor when installing a new disc. If the new disk has a negative parameter, then most of the wheel protrudes outward and when turning will touch the wheel arch. If the value of this parameter is too high, installing the disk will be impossible, since the supports and suspension arms simply will not allow it to be installed.
Definition of bolt pattern
The bolt pattern of a standard Kia Rio disc is quite easy to determine yourself. Determining the number of holes will not be difficult even for a preschooler. Ria has 4 of them. The diameter of the circle on which they are placed (PCD parameter) is not so easy to find out, but it is very possible. If you use the diagram below, determining the bolt pattern will take less than a minute. Here she is.
Bolt pattern detection scheme
From this diagram everything is extremely clear, except for the value N. The center-to-center distance of the holes is determined very simply. Using a caliper, measure the distance between the walls of adjacent holes and add the diameter of the mounting hole to this size. Using the simplest formula shown in the diagram, we obtain the PCD size, which we call the bolt pattern.
But you shouldn’t take the concept of wheel looseness lightly, as it directly affects traffic safety and the technical condition of the Kia Rio. Judge for yourself. If you deviate from the exact bolt pattern, the wheel will not be installed accurately along the axis, which will lead to insufficient bolt tightening torque. You may not notice this visually, and the consequences may not be the most pleasant. A discrepancy between the parameters can cause subtle wheel wobble, which over time will damage the suspension parts of your Kia Rio. Excessive vibration can also have a bad effect on the steering mechanism.
If you decide to replace the standard discs with the original ones you like, pay attention not only to what kind of bolt pattern they have, but also to the material from which the discs are made. They must be durable, lightweight, and the manufacturing company must not raise doubts about the quality of workmanship.
Watch an interesting video on this topic
Kia is a Korean brand specializing in the automotive industry. The company produces a wide range of vehicles, from compact hatchbacks, solid sedans to minibuses and full-fledged buses designed for urban transportation. One of the popular car models produced under this brand is Kia Rio.
This machine first appeared on the European market in 2000. To date, 3 generations of this car have been produced. The first is available in station wagon and sedan bodies. After 3 years, KIA RIO comes off the assembly line in an updated form. The headlights have undergone changes. In addition, the car receives improved sound insulation and front brakes.
In 2005, the second generation of this car was released. In 2010, the brand began cooperation with a famous German designer. Almost everything in the car changes: the radiator grille, bumpers, steering wheel, several new colors appear, the length of the car increases, etc. Starting in 2010, Kia Rio began to be assembled in Kaliningrad.
The third generation of the car was released in March 2011 on the platforms of 2 Hyundai models - Solaris and i20. In Russia at that time they are planning to release a special KIA RIA model. It will be presented to potential buyers in August 2011. The base car for this new product was the Chinese KIA K2, which was fully adapted for use in Russian conditions. Models of this car, released in 2013 and 2014, received a new body.
Today, Kia Rio is one of the most popular cars in Russia, with an affordable price and excellent quality. Therefore, many car enthusiasts choose this particular car for themselves. The car is the most practical and best-selling in its class. Due to the affordable price, the sales level of this car model is at the highest level. Kia Rio owners often tune their car, paying special attention to replacing standard wheels and tires.
What is a bolt pattern?
It would seem that there is nothing complicated in this process: just remove the standard disks and replace them with new ones. But in reality it's not that simple. Loosening discs and replacing them is a very lengthy and labor-intensive process, especially for those who have never done this.
The discs are attached to the wheel hub using bolts or spokes (certain parameters play a huge role here - the size and weight of the disc). So, for light alloy products, spokes are used, thanks to which the wheel is perfectly fixed. Bolt discs also differ in the number of holes. The marking says 05/112. This inscription indicates that there are 05 holes located on a circle whose size is 112 mm.
These parameters will be different for different brands of cars. If they are absent, you can carry out the bolt pattern yourself.
Important! The bolt pattern of a disk having an odd number of fasteners is calculated using a certain formula. You will need to measure the distance between the bolt holes. Next, you should multiply the resulting value by a coefficient, which for 03 fasteners is 1.55, and for 05 – 1.701.
How to perform disc bolt pattern?
So, where to start the wheel bolt pattern procedure for a Kia Rio? This can be done in several successive steps:
- Determine all significant technical parameters of the wheels. Selecting disks is a responsible task. Here you need to pay attention not just to the external attractiveness of the wheels, but also to other characteristics, in particular the bolt pattern. But first you need to determine what sizes and markings of disks you need.
But in principle, no confusion should arise, since all disks have standard markings corresponding to their parameters. All discs have the same standards. All the necessary indicators for the Kia Rio of various modifications can be found on the Internet.
So, for example, a KIA RIO car produced in 2013 and 2014 has the following marking - 6J R15 PCD 4x100 ET48 DIA54.1. This combination provides the owner of a Kia Rio with a wheel rim width of 6 inches and a diameter of 15 inches.
The following combination of letters and numbers is PCD 4x100 - a European marking that indicates the number of holes and the diameter of circles. These parameters represent a bolt pattern, i.e. Rio has 4 bolts, which are 100 mm in diameter.
When installing a new disk, you should pay special attention to such a parameter as disk offset. This parameter is no less important than wheel bolt pattern. If the new disk has a negative value, then during various maneuvers (sharp turns) the wheels will protrude outward. If this value is too high, the disk will not be installed. Therefore, wheel offset is one of the most important indicators.
The disc offset for Kia Rio is indicated by the following marking – ET48. When the surface planes of the disk coincide with its center, the offset indicator is 0. By European standards, the Kia Rio has a positive offset exactly at a distance of 48 mm.
- Determine bolt pattern. You can do this on your own using one of the proposed methods:
- If you are going to buy new wheels, just take with you the old models that need to be replaced. Compare disk sizes.
- Measure the distance between the fasteners using a special measuring tool. This is a last resort option for those who do not have old disks.
How to determine the standard tire and wheel sizes?
Determining the standard sizes of wheels and tires on a Kia RIO, for example, the 3rd generation, does not require any special skills or abilities. When purchasing tires for this car, it is important to know such parameters as bolt pattern and offset. This car has been produced since 2011, it is equipped with wheels of two radii - R15 and R16. It all depends on the configuration of the car. Some people use low-profile tires with a diameter of R17.
For cars produced in 2010, tires with a rim diameter of R14, R15, R16 are suitable.
Important! The tire sizes for a car of this model are: for R15 - 185/65, and for R16 - 195/55. If you decide to purchase non-standard tires, then the deviations in the wheel diameter should be minimal, and the bolt pattern should be suitable in any case.
If you need any help when determining the bolt pattern, it is better to immediately entrust this matter to specialists. They will help you determine the diameter, tire size, wheel offset and other parameters of interest for cars produced in 2002-2014.
How to choose disks and which ones are best to buy? The answer is in this video:
Bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) 2012-2016. Kia Rio 2018 bolt pattern
Wheel and rim sizes for Kia Rio All wheel parameters: PCD, offset and rim size, drilling
Kia Rio YB 2018 - 2019
Sedan
Hatchback, 5d
Kia Rio YB 2017 - 2019
Sedan
Hatchback, 5d
Kia Rio UB 2011 - 2017
Sedan
Hatchback, 5d
Hatchback, 3d
Kia Rio JB 2005 - 2011
Sedan
Hatchback, 5d
Kia Rio DC Facelift 2002 - 2005
Sedan
Station wagon, 5d
Kia Rio DC 2000 - 2002
Sedan
Station wagon, 5d
razmerkoles.ru
Wheel bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) (2012-2016)
- Razboltovka.ru
- Rio III (UB)
- 1.6 CVVT (123 hp, gasoline)
Find Kia Rio III (UB) drive parameters
The Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) model was produced from 2012 to 2016. Table of factory and suitable wheel bolt patterns for the Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline).
- LZ (number of holes)
- ET (disc offset)
- DIA (hole diameter)
| 2012 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2013 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2014 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2015 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2016 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory |
razboltovka.ru
Wheel bolt pattern Kia Rio I (DC) 2005 1.5 (95 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, gasoline)
- 2005
Find disk parameters for Kia Rio I (DC) 2005, 1.5 (95 hp, gasoline).
Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 (95 hp, gasoline) model - 2005.
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| 2005 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable |
razboltovka.ru
| 2002 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 2003 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 2004 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 2005 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable |
razboltovka.ru
Wheel bolt pattern Kia Rio I (DC) 2003 1.5 (95 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, gasoline)
- 2003
Find disk parameters for Kia Rio I (DC) 2003, 1.5 (95 hp, gasoline).
Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 (95 hp, gasoline) model - 2003.
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 2003 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable |
razboltovka.ru
How to make a Kia Rio wheel bolt pattern with your own hands
Kia Rio cars have been in constant demand and popularity among Russian car enthusiasts for more than fifteen years. Thanks to the manufacturer's affordable pricing policy, good technical characteristics and attractive appearance, there are even queues of buyers at Kia car dealerships in our country who want to become Rio owners.
It is not surprising that every Kia Rio owner wants to distinguish his car from thousands of others. The easiest way to do this is to replace the standard disks.
How to determine the parameters of Kia Rio wheels
When choosing new wheels for your Rio, first of all you need to pay attention not to their appearance, but to the parameters that they must meet. In principle, there is nothing complicated here, since all disks have standard markings. So, for example, Kia Rio cars of 2013-2016 have wheels in the database, whose markings are as follows: 6J (disk width) R15 (disc diameter) PCD 4x100 (number of holes, the diameter of the circle around which their centers are located) ET48 (disc offset, mm) DIA54.1.
Wheel bolt pattern
Even a novice driver can determine the bolt pattern of standard Kia Rio wheels. All Rio models have 4 of them. You can measure the center-to-center distance of the holes using a caliper. Next, simple calculations are carried out that allow us to obtain the PCD parameter, which is actually called the bolt pattern.
avtokia.net
Wheel bolt pattern Kia Rio I (DC) 2002 1.5 16V (98 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 16V (98 hp, gasoline)
- 2002
Find disk parameters for Kia Rio I (DC) 2002, 1.5 16V (98 hp, gasoline).
Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2002.
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| 2002 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.5 16V (98 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 16V (98 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 16V (98 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 16V (98 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 16V (98 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable |
If non-standard wheels are installed on your car, this can lead to friction and increased wear. Therefore, it is worth adhering to factory standards. Therefore, the correct selection of wheels is an important element.
Wheel looseness
Different wheels have been used on Kia Rio in different generations. Usually this information is indicated in the service book or technical documents of the car. Also, on each vehicle there is a sign that says which wheels and tires are suitable.
Characteristics
Let's look at the wheel bolt pattern for the Kia Rio according to the manufacturer's data by year of manufacture and generation:
Wheel rim.
Disk size | Disc offset | Sverlovka | Tire size |
|
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R13 front |
||||
175/70R14 front |
||||
Kia Rio wheel parameters:
PCD 4×100 with diameter from 13 to 15, width from 5J to 6J, offset from 34 to 48. Similar parameters to Honda Fit III (GE) 1.2 2018. Tire size from 13 to 15, width from 175 to 195 and profile from 60 up to 70. Minimum tire size: 185/65R13, maximum: 185/65R15.
Wheel looseness.
Conclusion
As you can see, quite a lot of tires and wheels are suitable for Rio, and therefore the car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.
Bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) 2012-2016. What kind of bolt pattern on Kia Rio 2018
Bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) 2012-2016. Kia Rio 2018 bolt pattern
Wheel and rim sizes for Kia Rio All wheel parameters: PCD, offset and rim size, drilling
Kia Rio YB 2018 - 2019
Sedan
Hatchback, 5d
Kia Rio YB 2017 - 2019
Sedan
Hatchback, 5d
Kia Rio UB 2011 - 2017
Sedan
Hatchback, 5d
Hatchback, 3d
Kia Rio JB 2005 - 2011
Sedan
Hatchback, 5d
Kia Rio DC Facelift 2002 - 2005
Sedan
Station wagon, 5d
Kia Rio DC 2000 - 2002
Sedan
Station wagon, 5d
- Razboltovka.ru
- Rio III (UB)
- 1.6 CVVT (123 hp, gasoline)
- LZ (number of holes)
- ET (disc offset)
- DIA (hole diameter)
| 2012 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2013 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2014 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2015 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2016 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory |
Wheel bolt pattern Kia Rio I (DC) 2005 1.5 (95 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, gasoline)
- 2005
Find disk parameters for Kia Rio I (DC) 2005, 1.5 (95 hp, gasoline).
Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 (95 hp, gasoline) model - 2005.
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| 2005 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.5 (95 hp, gasoline) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable |
| 2002 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.5 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 15 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 2003 | 5.0 | 13 | 4x100.0 | 40 | 54.1 | Factory |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 13 | 4x100.0 | 34 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 5.5 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.0 | 14 | 4x100.0 | 32 | 54.1 | Acceptable | |
| Kia Rio I (DC) 1.3 (82 hp, petrol) | 6.5 | 15 | 4x100.0 | 34 | 5 |
website
Bolt pattern is an important dimension of Kia Rio rims
A little history
Kia is a Korean brand specializing in the automotive industry. The company produces a wide range of vehicles, from compact hatchbacks, solid sedans to minibuses and full-fledged buses designed for urban transportation. One of the popular car models produced under this brand is Kia Rio.
This machine first appeared on the European market in 2000. To date, 3 generations of this car have been produced. The first is available in station wagon and sedan bodies. After 3 years, KIA RIO comes off the assembly line in an updated form. The headlights have undergone changes. In addition, the car receives improved sound insulation and front brakes.
In 2005, the second generation of this car was released. In 2010, the brand began cooperation with a famous German designer. Almost everything in the car changes: the radiator grille, bumpers, steering wheel, several new colors appear, the length of the car increases, etc. Starting in 2010, Kia Rio began to be assembled in Kaliningrad.
The third generation of the car was released in March 2011 on the platforms of 2 Hyundai models - Solaris and i20. In Russia at that time they are planning to release a special KIA RIA model. It will be presented to potential buyers in August 2011. The base car for this new product was the Chinese KIA K2, which was fully adapted for use in Russian conditions. Models of this car, released in 2013 and 2014, received a new body.
Today, Kia Rio is one of the most popular cars in Russia, with an affordable price and excellent quality. Therefore, many car enthusiasts choose this particular car for themselves. The car is the most practical and best-selling in its class. Due to the affordable price, the sales level of this car model is at the highest level. Kia Rio owners often tune their car, paying special attention to replacing standard wheels and tires.
What is a bolt pattern?
It would seem that there is nothing complicated in this process: just remove the standard disks and replace them with new ones. But in reality it's not that simple. Loosening discs and replacing them is a very lengthy and labor-intensive process, especially for those who have never done this.
The discs are attached to the wheel hub using bolts or spokes (certain parameters play a huge role in this - the size and weight of the disc). So, for light alloy products, spokes are used, thanks to which the wheel is perfectly fixed. Bolt discs also differ in the number of holes. The marking says 05/112. This inscription indicates that there are 05 holes located on a circle whose size is 112 mm.
These parameters will be different for different brands of cars. If they are absent, you can carry out the bolt pattern yourself.
Important! The bolt pattern of a disk having an odd number of fasteners is calculated using a certain formula. You will need to measure the distance between the bolt holes. Next, you should multiply the resulting value by a coefficient, which for 03 fasteners is 1.55, and for 05 – 1.701.
How to perform disc bolt pattern?
So, where to start the wheel bolt pattern procedure for a Kia Rio? This can be done in several successive steps:
- Determine all significant technical parameters of the wheels. Selecting disks is a responsible task. Here you need to pay attention not just to the external attractiveness of the wheels, but also to other characteristics, in particular the bolt pattern. But first you need to determine what sizes and markings of disks you need.
But in principle, no confusion should arise, since all disks have standard markings corresponding to their parameters. All discs have the same standards. All the necessary indicators for the Kia Rio of various modifications can be found on the Internet.
So, for example, a KIA RIO car produced in 2013 and 2014 has the following marking - 6J R15 PCD 4x100 ET48 DIA54.1. This combination provides the owner of a KIA Rio with a wheel rim width of 6 inches and a diameter of 15 inches.
The following combination of letters and numbers is PCD 4x100 - a European marking that indicates the number of holes and the diameter of circles. These parameters represent a bolt pattern, i.e. Rio has 4 bolts, which are 100 mm in diameter.
When installing a new disk, you should pay special attention to such a parameter as disk offset. This parameter is no less important than wheel bolt pattern. If the new disk has a negative value, then during various maneuvers (sharp turns) the wheels will protrude outward. If this value is too high, the disk will not be installed. Therefore, wheel offset is one of the most important indicators.
The disc offset for Kia Rio is indicated by the following marking – ET48. When the surface planes of the disk coincide with its center, the offset indicator is 0. By European standards, the Kia Rio has a positive offset exactly at a distance of 48 mm.
- Determine bolt pattern. You can do this on your own using one of the proposed methods:
- If you are going to buy new wheels, just take with you the old models that need to be replaced. Compare disk sizes.
- Measure the distance between the fasteners using a special measuring tool. This is a last resort option for those who do not have old disks.
How to determine the standard tire and wheel sizes?
Determining the standard sizes of wheels and tires on a Kia RIO, for example, the 3rd generation, does not require any special skills or abilities. When purchasing tires for this car, it is important to know such parameters as bolt pattern and offset. This car has been produced since 2011, it is equipped with wheels of two radii - R15 and R16. It all depends on the configuration of the car. Some people use low-profile tires with a diameter of R17.
For cars produced in 2010, tires with a rim diameter of R14, R15, R16 are suitable.
Important! The tire sizes for a car of this model are: for R15 - 185/65, and for R16 - 195/55. If you decide to purchase non-standard tires, then the deviations in the wheel diameter should be minimal, and the bolt pattern should be suitable in any case.
If you need any help when determining the bolt pattern, it is better to immediately entrust this matter to specialists. They will help you determine the diameter, tire size, wheel offset and other parameters of interest for cars produced in 2002-2014.
How to choose disks and which ones are best to buy? The answer is in this video:
ilovekiario.ru
distance and number of wheel mounting bolts
Every driver strives to stand out from the gray mass by spending little money. Shallow tuning involves slight changes in the appearance of the wheels, plastic hood and glass deflectors, and the application of stickers. Owners who decide to make a change will need to select and buy new wheels that fit the Kia Rio.
Choice
The parts differ in size and location of bolts. When you come to the store, contact a consultant - he will select disks with suitable parameters.
Owners of a Kia Rio of any generation will need a bolt pattern of 4 to 100 - quite common, sold in almost every car store. The 4 to 98 bolt pattern is even more common; it fits VAZs of all generations up to the new Lada Vesta and Lada X-ray.
Under no circumstances should you confuse the parts - the holes simply won’t fit.
After choosing the wheel bolt pattern, you will need to decide on the diameter. Please refer to your vehicle owner's manual for the appropriate dimensions. Extra inches of disks give strong resistance to the engine, it will overheat and fuel consumption will increase.
The optimal diameter for Kia Rio is 15–16. Some owners install 17, but with low-profile tires.
The next indicator is width. Kia Rio arches are designed for a width of 185–195. Deviations from these numbers will affect the technical characteristics specified in the vehicle passport.
If the appearance of the car is not particularly important to you, then you can choose wider and larger wheels, but you will have to fill more fuel and carry out technical inspections more often.
The last thing that the owner chooses is the shape and color of the pattern. In this case, there is nothing to advise - the choice is yours.
Coloring
Sometimes the color of the wheels does not suit the car or does not suit the owner. Typically, discs are painted in standard shades - black, white, and are rarely painted in others. Discs with a 5-10 millimeter thick strip of bright color along the rim are gaining popularity.
The wheels you like can be easily painted yourself or at a service center.
There are two types of painting: powder and acrylic. The first is better, but you will need special equipment to heat the powder to the desired temperature. The advantage of this method is that the metal is painted while heated, and when it cools, the paint is firmly fixed to the material.
Acrylic paint gives the same effect, but you will need to perform a number of operations during preparation. What kind of paint will be on your wheels is up to you. Powder can cover only the entire surface with one shade, acrylic can cover several colors at once.
After you have chosen the wheels for your Kia Rio and painted them, it's time to start installation. At this point you need to be extremely careful not to scratch the parts - when the key falls off, it can cause serious damage. Many owners also paint the bolts, in which case the parts look even more beautiful, but during installation it is better not to damage the paint on the bolts themselves, otherwise the work has been done in vain.
Conclusion
Sometimes car owners want to stand out from the gray mass and improve the appearance of the car, for example, by replacing and painting the wheels. If you decide to modify your wheels, you should remember the sizes - they must correspond to those specified in the car’s owner’s book, otherwise you can’t count on driving performance declared by the manufacturer.
kiario.pro
What is the wheel bolt pattern on a Kia Rio - Kia Rio wheel bolt pattern
Wheel bolt pattern Kia Rio I (DC) 2004 1.5 (95 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 (95 hp, gasoline)
- 2004
Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 (95 hp, gasoline) model - 2004.
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio II (JB) 2007 1.4 16V (97 hp, gasoline)
- Razboltovka.ru
- Rio II (JB)
- 1.4 16V (97 hp, gasoline)
- 2007
Table of parameters and wheel bolt patterns for the Kia Rio II (JB) 1.4 16V (97 hp, gasoline) model - 2007.
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio I (DC) 2000 1.5 16V (98 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 16V (98 hp, gasoline)
- 2000
Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2000.
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio II (JB) 2008 1.4 16V (97 hp, gasoline)
- Razboltovka.ru
- Rio II (JB)
- 1.4 16V (97 hp, gasoline)
- 2008
Table of parameters and wheel bolt patterns of the Kia Rio II (JB) 1.4 16V (97 hp, gasoline) model - 2008.
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio I (DC) 2001 1.5 16V (98 hp, gasoline)
- Razboltovka.ru
- Rio I (DC)
- 1.5 16V (98 hp, gasoline)
- 2001
Table of parameters and wheel bolt patterns of the Kia Rio I (DC) 1.5 16V (98 hp, gasoline) model - 2001.
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio II (JB) 2009 1.4 16V (97 hp, gasoline)
- Razboltovka.ru
- Rio II (JB)
- 1.4 16V (97 hp, gasoline)
- 2009
Table of parameters and wheel bolt patterns for the Kia Rio II (JB) 1.4 16V (97 hp, gasoline) model - 2009.
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Wheel bolt pattern Kia Rio I (DC) 1.5 16V (98 hp, gasoline) (2000-2005)
moykiario.ru
Selection of wheels for Kia Rio of the second and third generations, correct selection of tire and wheel sizes, bolt pattern, manufacturer with photos and videos
The Kia Rio has been one of the best-selling cars in its class in Russia for several years. Then insert your hand and pull the right mirror on the Kia Rio towards you. It has gained considerable popularity among car enthusiasts due to its modern technical characteristics, level of equipment and comfort, reliability and unpretentiousness, as well as, of course, appearance and price. It must be said that the popularity of the car is not limited to Russia and the CIS countries; it is successfully sold in South Korea, European countries, the USA and others. Indeed, Rio of the second and, especially, third generations have become one of the most commercially successful cars of the brand. Some of the important characteristics of a car today can be considered handling, appearance and fuel consumption. Which wheels to put on a Kia Rio cost 195\55 R16 which ones can be replaced instead, these are expensive and the size is not suitable How to remove the cigarette lighter on a KIA RIO They are the ones that are most influenced by which wheels are installed on the car. In some situations on the Kia Rio 2012, clutch adjustment is considered justified. Spark plugs on Kia Rio 3 and other generations should be changed during other routine maintenance, namely every 8–9 thousand. Wheels on KIA Rio 2015 By choosing the right wheels on Kia Rio 2 and 3, you can significantly improve these and some other characteristics.
Kia Rio with stamped wheels and plastic caps
In addition, the choice of wheels will one way or another affect the following qualities of the car:
- Controllability
- Braking distances
- Comfort level in motion
- Service life of suspension parts and tires
- Acceleration dynamics
- Fuel consumption
The wrong choice of Kia Rio wheels can negatively affect any of these characteristics, as well as lead to a significant increase in financial investments in the car
Wheel sizes of Kia Rio second and third generations
Rio wheel size consists of two components: wheel size and tire size. When choosing both separately, you should keep this in mind. Also, if deep tuning is not planned, you need to use what the manufacturer recommends. When using wheels and tires recommended by the manufacturer, full implementation of the vehicle's capabilities is guaranteed, as well as maximum compliance with the declared characteristics in any road situation. What wheels can be installed on a KIA RIO On the other hand, using wheels of other sizes can lead to worse handling, reduced suspension life, incorrect speedometer readings and other problems.
The main parameters indicated by the marking of rims are the width of the rim, its diameter, as well as the bolt pattern. To choose the right disc for Rio, you need to know how to decipher its size designations. Let's give an example:
The standard wheel rim size for the Kia Rio 2 (2005-2011) is 5.5Jx15, where the first number indicates the width of the rim (the place with which the tire will come into contact) in inches, and the second rim diameter is also in inches.
Tires are usually marked as follows: 195/55R15. Adjusting and replacing the clutch on a KIA Rio It is this type of marking that is usually placed on the outside of the tire. The first number in it indicates the width of the tire in centimeters, the second is the percentage ratio of the profile height to the width, and the third is the diameter of the rim for which it is intended.
The wheels of the Kia Rio 3 have similar characteristics to the wheels of the second generation car, however, their exact dimensions depend on the modification and configuration. This refers to the wheels and tires installed on new cars when they are sold. How to remove the cigarette lighter on a Kia Rio 2012 video Avto Moto Blogger Subsequently, they can be replaced with those that have the desired characteristics or appearance.
Alloy wheels for Kia Rio and Hyundai Solaris “KiK” 13067 Replica (ABC Avtozapchastey Ostrogozhsk)
THANK YOU ALL FOR YOUR VIEWS, LIKES AND SUBSCRIBES! Article: 13067 Series: Replica Diameter: 15 Rim width: 6.0
YST R15 wheels for Hyundai Accent, Solaris, Kia Rio, etc.
Completed order YST R15 wheels for Hyundai Accent, Solaris, Kia Rio, etc. * Official VoKoleso application for Apple
You can also install larger wheels on the Kia Rio, for example 205/55 R16. There is a set of winter tires on standard 2010 Kia Rio wheels. But this is most likely impossible without making changes to the design of the arches. Although you don’t always have to delve so deeply into the design of a car. Sometimes it is enough to install wheel arch liners so that the tires will not catch when the steering wheel is turned completely to the side and on uneven roads. In Existence or a store, tell them that you need the original for the Kia Rio and that’s it. The Kia Rio wheel size is determined based on the seating capacity in the arches.
New wheels on Kia Rio
We must remember that for a Kia Rio, a wheel size larger than that recommended by the manufacturer may cause deterioration in dynamics, reduced suspension life and incorrect speedometer readings.
Kia Rio wheel pattern
The bolt pattern of Kia Rio wheels is an important parameter that allows you to choose wheels for a car. It shows how many studs the wheel is attached to, the diameter of the holes for them and how they are located. How to adjust windshield washer nozzles on a Kia Rio. What wheels to put on a Kia Rio cost 195\55 R16 what to replace them with. The studs to which the wheel rim is attached with nuts are usually located on the hub and their number on passenger cars is from 4 to 6. It is important that the holes in the disk are the same diameter as the diameter of the studs and their number is the same. In addition, you need to take into account other parameters related to the bolt pattern, such as the offset and thread of the fastener. The offset of the disc directly affects its choice for a particular car model, and the fastener thread is needed for the correct selection of the conical centering nuts that secure the wheels on the Rio. New Kia Rio cars are usually fitted with Kumho Solus tires at the factory. The wheel bolt pattern must correspond to that declared by the manufacturer; for Rio it is 4&100 with a hub hole of 54.1, offset ET 46 and fastener thread M12x1.5. This means that the wheels are mounted on 4 bolts located on a circle with a diameter of 100 mm. Which Kia Rio wheels to choose are largely influenced not only by them. The use of another bolt pattern on the Kia Rio is not allowed for safety reasons. Video How to remove the cigarette lighter on a KIA RIO Here it must be said that the wheels on third-generation cars (2011, 2012, 2013, 2014, 2015, 2016 onwards) in terms of fastening are no different from the second generation (2005-2010 onwards) , so the bolt pattern is the same.
If there is a need to install wheels that do not fit standard hubs, you can use wheel spacers:
Wheel manufacturers
Which Kia Rio wheels to choose is largely influenced not only by their size and bolt pattern, but also by the manufacturer. The price range for new tires and wheels is very wide, and it is not always easy to determine the quality and compliance with the characteristics of a particular brand. To give preference to a certain company, you need to understand in which segments it operates, what products it offers and its reputation in the market. In general, the most well-known manufacturers use the latest technologies in their products, which allows them to achieve the best results in many characteristics of car wheels and tires. Usually the prices for such wheels are much higher than average, but this does not mean that in the average and even budget price categories you cannot find good offers in terms of price-quality ratio. Ru: what wheels to put on a Kia Rio cost 195\55 r16. Today, some Russian brands offer a wide range of tires for cars, and there are good brands and successful models that have managed to gain popularity and a good reputation among car enthusiasts. News How to remove the cigarette lighter on a Kia Rio 2012 video In addition, there are many Chinese companies on the market that offer products that are quite capable of competing with inexpensive brand names. It must be said that both of them use advanced technologies, often purchased from well-known companies, and quality control, which allows them to bring truly competitive products to the market.
If we conditionally divide automobile rubber manufacturers into groups, we can distinguish two main segments:
World-famous companies whose products are sold in many countries and are in great demand:
Russian or Chinese companies offering high quality products:
New Kia Rio cars are usually equipped with Kumho Solus or Hankook Optima tires at the factory. Both options meet the highest modern safety requirements, and in tests show results even superior to some more expensive models. To replace them, you can choose the Nokian Hakkapelitta 5 as it shows excellent results in handling and braking on cars of this class in urban conditions. But this is not always feasible, so on a Kia Rio, replacing the spark plugs is possible after. As winter tires, you can purchase, for example, Cordiant Polar 2, which shows good results in reducing braking distance, handling and durability.
Of course, this is not a complete list of brands; in addition to those listed here, there are other equally well-known ones, among whose products you can find excellent options. In this case, you should use a rule that will help you avoid buying a fake: always buy wheels in specialized stores from reputable suppliers who provide all the necessary information and documentation for the purchase. By following it, you will protect yourself from the troubles associated with purchasing a low-quality product and will be confident in the adequate behavior of the car in any road conditions.
5net.ru
Kia Rio wheel pattern: description, characteristics
If non-standard wheels are installed on your car, this can lead to friction and increased wear. Therefore, it is worth adhering to factory standards. Therefore, the correct selection of wheels is an important element.
Wheel looseness
Different wheels have been used on Kia Rio in different generations. Usually this information is indicated in the service book or technical documents of the car. Also, on each vehicle there is a sign that says which wheels and tires are suitable. 
Kia Rio.
Characteristics
Let's look at the wheel bolt pattern for the Kia Rio according to the manufacturer's data by year of manufacture and generation: 
Wheel rim.
Disk size | Disc offset | Sverlovka | Tire size |
|
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R14 front |
||||
175/70R13 front |
||||
175/70R14 front |
||||
Kia Rio wheel parameters:
PCD 4×100 with diameter from 13 to 15, width from 5J to 6J, offset from 34 to 48. Similar parameters to Honda Fit III (GE) 1.2 2018. Tire size from 13 to 15, width from 175 to 195 and profile from 60 up to 70. Minimum tire size: 185/65R13, maximum: 185/65R15. 
Wheel looseness.
Conclusion
As you can see, quite a lot of tires and wheels are suitable for Rio, and therefore the car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.
koreanautoreview.com
Wheel bolt pattern Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) (2012-2016)
- Razboltovka.ru
- Rio III (UB)
- 1.6 CVVT (123 hp, gasoline)
Find Kia Rio III (UB) drive parameters
The Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline) model was produced from 2012 to 2016. Table of factory and suitable wheel bolt patterns for the Kia Rio III (UB) 1.6 CVVT (123 hp, gasoline).
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2012 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2013 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2014 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2015 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory | |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 2016 | 6.0 | 15 | 4x100.0 | 48 | 54.1 | Factory |
| Kia Rio III (UB) 1.6 CVVT (123 hp, petrol) | 6.0 | 16 | 4x100.0 | 52 | 54.1 | Factory |
