How to make a student travel card.

Some school supplies can be easily made with your own hands - you just need patience and a little imagination. Your child can have fun with you during the creative process. In addition, the student will have exclusive stationery that will surely arouse admiration among his peers.

For parents, this is a great way to save money - pencil cases, stands and covers are now quite expensive in stores, but creating them from scrap materials will cost much less. In this article you will find several step-by-step instructions for creating your own stationery.

DIY pencil case

With due diligence, you can make a beautiful school pencil case. It is better if there is a sewing machine in the house - with the help of adults, the child can make just a few seams, and a stylish pencil case will be ready. However, if you don’t have a machine, you can make a few stitches on your hands and fasten the parts of the pencil case with ribbons, buttons or a stapler. Let's look at how you can make a pencil case:

• To begin, choose the material for the pencil case. Any thick fabric, leather or leatherette, felt or nubuck will do. Surely you have old unnecessary clothes or shoes that you can give a second life to. The pencil case doesn't require much material at all - count your pencils and pens and determine how much space they need.
• The simplest option is a cosmetic case. It resembles a small handbag in which all accessories will be placed. This model is suitable if you do not have too many necessary accessories, otherwise the child will constantly get confused in them. Making such a pencil case is simple - fold a square or rectangular piece of material in half, and stitch the edges if necessary. Then make two seams on the sides or secure the material tightly with a stapler. One side should be left open. You can make several holes on it and fasten it with buttons or beautiful ribbons.
• If there are a lot of accessories, separate pockets should be made in the pencil case. Such a pencil case should be a little wider - you can make it in the notebook format by folding the material in half or three. Finish the edges and figure out how you will close the pencil case - thread a ribbon or sew on a button. Then make pockets inside the pencil case. They can be decorated by bending the bottom edge of the pencil case inward and making several vertical stitches on a typewriter in different places. You can carefully stitch the pockets by hand using colored threads. If there is not enough material, the pockets should be made of patches from another fabric - this will only make the design more interesting.
• Any pencil case can be further decorated. This will be especially interesting for girls - they can stick rhinestones on it, sew on beads or make flowers from leftover fabric.

DIY notebook

You can make an unusual notebook yourself with your child. For Russian or mathematics lessons, you can use unused sheets from old notebooks, and if the subject does not require lines and boxes, the notebook can be made from ordinary A4 sheets. The technology is very simple:

• Choose which sheets you are going to use to make your notebook. The paper must be the same size.
• If these are A4 sheets, fold all these sheets in half. They should be fastened in the middle with two seams or a stapler. If you have A5 paper, then you should not bend it - just fold it in a stack and also staple or stitch along the left edge.
• The most creative process is creating the cover. The child will certainly be interested in designing on his own. Before you start, evaluate the size of the notebook - if it is thin, an A4 sheet will be enough for the cover. If the notebook is thick, the cover should be a little longer.
• The base of the cover should be made of flexible thin cardboard - this way the notebook will be durable and easy to use. It can be decorated in different ways. For example, the cover will look good if it is covered with gift paper. You can decorate it with applique, pieces of fabric, beads and ribbons.
• You should attach the cover to the notebook with a stapler or thread.

DIY notebook cover

Now schools require that notebooks and textbooks be wrapped in additional covers. Indeed, children do not always handle their supplies with care, and over the course of a whole school year they can become frayed or torn. For this purpose, stationery stores sell their polyethylene covers. You can do similar things with your own hands. The easiest option is to make a cover from a transparent bag, simply wrapping it around the book and securing the cover with a stapler in the right places. However, you can make a really beautiful, interesting cover - for example, from polyethylene or artificial leather. It is very easy:

• Cut out a rectangular piece of the material you like. The width should be 1 cm greater than the height of the book, and the length should be 5-6 cm greater than the spread of the book. These allowances are needed to wrap the book and secure the cover.
• Place an open book on the cover. Fold the leather or oilcloth on both sides so that they cover the edges of the cover. You can fasten the edges at the top with a stapler, but it is best to make several seams.
• The cover can be decorated in different ways. For example, you can attach a pocket made of the same material to it, make a beautiful signature, glue ribbon bows, appliqués or beads.

DIY stand for a book or tablet

It is much more convenient to work with a textbook if it is placed on a special stand. Nowadays, it is also increasingly common for middle and high school students to use tablets at school for reading, creating presentations, or taking notes. You can make a convenient multifunctional stand for both a tablet and a book with your own hands using thick wire:

• Take the wire. It should bend easily under force, but not bend itself under the weight.
• Typically, stands are designed as follows - they have a narrow support at the back and two diverging supports at the front, on which a tablet or book is placed.
• Bend the wire into an elongated semicircle and pull it back.
• Take the two edges of the wire and bend them into a triangle so that one corner goes up. This is how you prepare a place for a tablet or book.
• Bend both ends in a semicircle parallel to the table surface.
• Bring the ends back behind the narrow support and make a neat knot in it.

From scrap materials you can make interesting, convenient and simple school supplies. This will help you save a lot when getting your child ready for school. In addition, you will surely enjoy the process of joint creativity, and as a result you will make unique accessories that no one else at school will have.

The school year has already begun, and are you still thinking about creating a comfortable workplace for your child? Look at our selection of tips and find out how to design an office for your child without significant expenses.

Table on supports. If adjustable tilt and height are important to you, choose a table with spacers. This design allows you to use a tabletop of any format and is convenient for those who actively write and draw. Support legs can be supplemented with shelves to accommodate boxes or baskets.

Supports with shelves and pull-out baskets are an equally practical solution. When installing such structures, remember that the height of the desktop should be about 73–75 cm, respectively, the height of the supports should be 70 cm.

A desk combined with a bench. This solution is not only aesthetically pleasing, but also practical: the bench serves as a support for the desk. You can use a cabinet with drawers as a second support, placing it under the other edge of the table or in the middle.

Hanging tabletop. Using a table without legs will help make the space of the room visually more spacious: this is the most ergonomic solution for small rooms. You can also add hanging modules with drawers there.

Spacious tabletop and several mobile cabinets. If you have to study a lot, install a comfortable long tabletop, and use the cabinets on wheels as a place to store school supplies and stationery.

A table connected to a bed is suitable for small apartments. One of the cabinets is both a support for the tabletop and the head of the bed. The second, with drawers, serves its intended purpose. If the cabinets are low, additional metal supports will be required to raise the tabletop to the desired height.

A corner table that doesn’t take up extra meters. Suitable in cases where more space is required: for example, if a child, in addition to studying, uses the workplace for his hobbies. The best place for such a table is by the window, so that the light falls at the right angle and from the right side.

Modules for school supplies. Small modules are more convenient than large cabinets because they allow you to quickly find the thing you need.

Table + shelves. The rack is one of the integral elements of the school
headset It is desirable that it blends in with the table. Typically, a shelving unit is a fairly spacious structure that can accommodate books, toys, hobby items, and much more.

Work place by the window. Quite a popular idea for decorating a workspace for a schoolchild. Place shelves on the sides and drawers at the bottom. Choose Roman or Japanese blinds to make your workspace as light as possible.

A loft bed is another popular solution for small rooms. Below is a work space, above is a sleeping area. This design is also suitable if both children are schoolchildren.

More free space. Even in the most cramped conditions, you can choose the optimal combination of furniture that suits your child. Alternatively, you can zone the workplace and the sleeping area using a chest of drawers, which can simultaneously serve as a support for the tabletop.

Retractable structures are convenient to use if two children of different ages live in a room, when one needs a full-fledged table, and the other needs a small space for activities.

You will find even more ideas in the group

In this article we will talk about how to make a pencil case for school together with your child.

It's no secret that any child wants to have school supplies that are not only easy to use, but also allow them to stand out among their classmates. And what can help you stand out better than something made by hand? Let's talk about pencil cases today.

Beautiful, cool DIY school pencil cases: ideas, photos. How to decorate a homemade school pencil case?

So, first you can get acquainted with the ideas. What if any of them inspires?

How to make a beautiful pencil case for school from paper and cardboard: master class

For a similar school accessory will come in handy:

• Cylindrical cardboard tube

IMPORTANT: In order to make the work easier, you can not glue a similar pipe separately, but take a ready-made one. For example, from under a paper towel.

• Wrapping or plain colored paper
• Multi-colored cardboard
• Elastic band – preferably wide. And colored
• Hole puncher
• Stationery knife
• PVA glue or double-sided tape

Procedure:

• A cardboard blank is needed cut with a knife into two parts.
• Each of the received parts must be carefully wrap in colored paper. Both glue and tape are suitable for fastening.
• Now it's worth roll colored cardboard into a tube so that a cylinder from it could be placed inside the workpiece described above.

IMPORTANT: The colored cardboard should extend approximately 3-5 cm from the top cylinder.

• Then it's worth taking a smaller part cut cardboard cylinder (something like a lid). It is necessary to form a hole in it parallel to each other with a hole punch two holes.
• These holes are what you need thread the elastic band, securing it with knots. This elastic band will help the pencil case close tightly.

How to crochet and knit a pencil case for school for pencils and pens: diagram with description

This pencil case does not require any complex patterns; it is very easy to make. For a similar pencil case for beginners in knitting you will need:

• One skein of yarn

IMPORTANT: The yarn needs to be thick enough - in this case, the pencil case will keep its shape perfectly.

• Knitting needles or hooks
• thick needle
• Button

So, you can get started:

• You need to start with 30 air loops. By counting the second loop from the hook, you need to create 29 columns. No yarn over required.
• Now the second row. Worth creating lifting air loop.
• In the next row you need to do 29 columns. No need for a yarn over again.
• Once the height of the rectangle reaches approximately 23 cm, the second row can be completed.

• 2 sc
• Skip 2 stitches
• 5 sc, carried out in one loop
• Skip 2 stitches
• Skip 2 stitches
• In one loop - 5 dc
• 2 sc
• Air loops in the amount of 10 pcs.

IMPORTANT: You need to thread it through the same loop that appeared before the air loops.

• Skip 2 stitches
• 5 dc, carried out in one loop
• Skip 2 stitches
• Skip 2 stitches again
• 5 dc in one loop
• Skip 2 stitches
• 2 sc

• Bottom edge the resulting rectangle worth turning up.
• top edge, which with a scallop, on the contrary, is necessary roll down.
• Side seams worth processing single crochets.
• At the final stage a button is sewn on.

How to sew a pencil case for school from fabric: patterns, instructions. How to make a school pencil case for girls without a zipper with your own hands?

For a girl, you can make a simple but elegant fabric pencil case. For him needed:

• Textile
• Scissors
• Hot glue gun

The accessory is made without sewing as follows:

• A rectangular piece of fabric is needed fold in half as shown in the photo

• Side edges necessary trim

IMPORTANT: This should be done exactly.

• Top edge also desirable trim

• With glue side parts are connected blanks

• Now you need to take separate neat strip of fabric and place it approximately in the middle of the blank envelope

• The strip can then be glued. But always to the bottom of the workpiece

The pencil case is ready! How to use it?

• To the center Envelopes hold pens and pencils

• They are covered one part of the envelope

• Then all that remains is tie in a knot glued strip

You can make other pencil cases for girls from fabric. Here, for example, pattern for a kitten pencil case:

How to sew a pencil case for school from felt with a zipper for boys?

Materials for the pencil case:

• Lightning
• Threads
• Needle
• Scissors

The work should proceed as follows:

• Felt needs to be prepared 2 rectangles

IMPORTANT: The width of one should be approximately twice the width of the other.

• Lightning need to be positioned just right between these pieces of material
• Now it is necessary sew in
• The workpiece must be positioned so that most of it was on top, A lightning - closer to the left edge
• Now the silhouette of a whale is drawn. The zipper should be on the mouth
• Whale cut out
• Need to cut another silhouette
• Now it's your turn eye

IMPORTANT: For these you will need a white circle of felt and a black button.

• You can cut it out of white felt and fountain
• After turning the workpiece inside out, you need to flash
• Only after this is it possible turn the whale right side out

How to sew a pencil case for school from jeans? How to sew a pencil case-cosmetic bag for teenagers and high school students, girls and boys, with your own hands?

Almost everyone can find old jeans. Especially in teenagers. They can be given a second life in the form of a fashionable cosmetic case, for which you will need:

• Two pieces of denim each measuring 26x12 cm
• Lining fabric of similar size. Preferably it should be linen
• Same size piece of batting
• Zipper length 25 cm
• Wax pencil, needles, threads, scissors. A sewing machine is preferred
• Decorative elements

IMPORTANT: Additional pieces of fabric are needed precisely in order to better protect school supplies from impacts.

How to make a pencil case? You should follow the following simple pattern, which is also suitable for making cosmetics bags:

The dimensions can, of course, be changed. But it must be remembered that You need to leave seam allowances of at least 1.5 cm. Accordingly, the length of the zipper will also need to be changed.

In order to make quilting, you can use the following scheme:

• Cursing lines wax pencil. Bonding batting to jeans can be done with regular pins.

• Then you can make stitching, then repeating the same with the second part of the denim.

• It's time attach the zipper. Its front part needs to be stitched to denim with batting.

• Now it's your turn Linen lining. It needs to be stitched to the back of the zipper.

IMPORTANT: The lining should first be basted or simply folded.

• You need to attach a zipper to both parts of the workpiece in the same way. In the end it will turn out 4 pieces of fabric, attached to the zipper from different sides.

• Now you need to unzip and connect the fabric around the perimeter. The same must be done with the lining. It is advisable to cut off the corners of the linen lining- so they definitely won’t interfere.
• All that remains is turn out pencil case with the front side facing out and tuck the lining into it.

How to sew a school pencil case with two compartments for a first grader? How to sew a math pencil case for school?

For a pencil case with two compartments that can hold a ton of pencils and pens, you will need:

• Pieces of leather or at least artificial leather, A4 size – 2 pcs. You can find them in haberdashery shops or simply use an old unnecessary bag.

• Colored leather pieces
• Long zipper
• Thicker nylon thread
• Needles – 2 pcs.
• Paper or newspaper for creating a pattern
• Eraser, ruler, pencil or pen, chalk, scissors
• Lighter or matches
• Awl, hammer, iron
• Cutting board
• Wax with a scalpel is desirable, but not necessary

You can get started:

On a piece of paper you need to draw pattern. Convenient size – 245x195 cm. It is advisable to immediately round the corners.

IMPORTANT: To do this you will need to take some round object with a diameter of about 5 cm.

• The resulting pattern is needed attach to the underside of a piece of leather. After tracing, you need to cut out two blanks. If thick leather is used, there is no need to leave any space for seam allowances. If the work is carried out with leatherette, you should leave 1-1.5 cm for the allowance.

• If the material is thin, it is recommended to process it doublerin. To do this, you need to cut two pieces from dublerin according to the pattern, which need to be applied to the wrong side of the leather and ironed. It is recommended to place a dry cloth on top.

• Now it's time for the decor. If you want to design a pencil case in the form of a sheet of a school notebook, you can make markings for such a sheet on a white front piece of leather.

IMPORTANT: The most important thing is to draw all the details in a mirror image.

• Now the markings need to be embroidered on a sewing machine. The ends of the threads are pulled to the wrong side.

• Next, from pieces of colored leather you can cut out any applique - numbers, letters, leaves. The main thing is to draw them in a mirror image on the reverse side of the material. Then pictures cut out and sewn onto the pencil case.

• If the edges of the workpiece are not rounded, now is the time to fix it., smearing the corners with glue and then nailing them with a hammer. The latter should be done through fabric.

• It's time to glue in the zipper. To do this, not fully unfastened, it is glued down in the middle of the pencil case as indicated in the picture.

IMPORTANT: If the zipper has a metal tip, it is advisable to carefully cut it off and cauterize the cut line.

• Then the zipper needs to be glued around the perimeter future pencil case. Its other end is glued similarly to the first, but only opposite it.

• Time to get some work done above the inside of the pencil case. Using an awl on the front side it is worth marking the places where the elastic band for holding school supplies will be attached.

• Are cut off a few pieces of rubber bands.
• Use scissors or a scalpel to cut holes, through which the elastic bands will be attached.
• Rubber bands are threaded through the holes and are attached using a sewing machine.
• Both the front and back parts need glue. But it is also desirable to sew. To do this, using a ruler and an awl you need to make, stepping back 2-3 cm from the edge of the pencil case, mark.

• Now you can take thick nylon thread. It is advisable to treat it with wax - this way it will not be fluffy and will glide better. The ends of the thread must be threaded into different needles. When one is threaded into the hole, the second is threaded into the next hole in the direction towards the first. There is no need to make knots at the end - just singe the ends.

Such a pencil case can fit not only pencils and pens, but also mathematical accessories such as a ruler. You can decorate such an accessory with numbers.

As you can see, making a pencil case with your own hands is not that difficult. A little patience and a drop of imagination - and now the original school accessory for the child is ready!

Various design options for homemade pencil cases: Video

Any student class, from the youngest to the graduate, required place to study lessons.

Schoolchild's desk should be functional, convenient and uncluttered. Most often chosen for children wooden desks.

Today, when from the first grade students work with computer, there should be room on the table for it too.

Manufacturing DIY school table - significant saving for the family budget. You can decorate the tabletop in the most incredible ways, and then the table you made yourself will look like an expensive designer thing.

School desk options

Table for first graders should be spacious so that there is enough space for textbooks and notebooks.

For more adult student, you can purchase or make a multifunctional table with retractable panel for keyboards and with many shelves or drawers on the surface.

It is very important that workplace the child was as comfortable as possible, and all the necessary for classes things were at hand.

School tables can be completely various in appearance and design - from simple angular and straight to creative

Folding table

Table-desk

Schoolchild's desk

We won't consider typical desks that stood in all Russian apartments in the 90s of the last century. Such tables boring in performance.

Let's consider unusual table with A-shaped legs (trests) and solid long tabletop. You can use an old one as a countertop. door canvas with a smooth surface.

Stages of work

Step 1. Draw and cut out table top. We process it with sandpaper or a grinding machine. You can make a special edging on the sides finishing edging, which is sold at any hardware store.

Note: with the edging, the width of the finished tabletop will be 72 cm!

Step 2. Cut 8 boards long no less 75 cm (if necessary, the edges will need to be trimmed with a jigsaw), sand them.

Step 3. Corner tilt boards for trestles should be such that the height of the legs in total with the thickness of the table top was 75 cm. To do this, cut out small bars, which will be located between the upper parts of the supports. The width between the lower parts should be 22 cm.

Step 4. In two boards 70 cm long drill two 9 mm holes each (for mounting the trestle). The holes should be equal distance! Above retreat about 3.5–4 cm, it all depends on the width of the board. Drill holes in the middle of the upper part of the legs 9 mm. Furniture bolts we fasten legs and strengthen the structure self-tapping screws.

Note: The size of the bolts is 6 mm, and the diameter of the holes for them is 9 mm! This is necessary because the table legs are attached at an angle.

Step 5. At the bottom there is a goat we fix two bars long 19 cm. The height of the fastening of the bars is not less than 3 cm from the floor. On bars we lay two boards each that will serve shelf, we secure them with self-tapping screws.

Step 6. Having measured the distance between the goats, screw it on wooden blocks to prevent the tabletop from moving.

For the best sustainability It is recommended to use countertops dowels. To do this, drill holes in the supporting boards with a depth of 8 mm, and in tabletop – 22 mm. The dowels should be dipped in glue PVA and drive into the board, then carefully place the tabletop on them. For such massive table you need to make 2-3 dowels on each side.

Step 7 All wooden parts of the table should be handle impregnation. For a children's table you need to apply no less 3 layers(so that it is impervious to moisture). Each layer should fully dry out. After the last layer has dried, the table is painted or varnished. Can be mixed with varnish a little coloring to give it the desired color shade.

Note: The table can be decorated if desired. The best decorative technique for a children's table is: Just choose a cheerful picture or decorate the tabletop with images of your child's favorite characters.

School table for two children

Convenient and practical may be an option for two children angular table. Each child is provided with a work place and retractable drawers for storing educational supplies.
Tabletop width – 600 mm, thickness – from 16 mm.

Stages of work

Step 1. Execute sawing material or order it from a carpentry workshop.

Step 2. Collecting everything boxes. There should be 6 large ones (3 pieces for each table base) and 4 small drawers for various small items under the tabletop itself. Holes for confirmations drill using a Fostner drill. We nail hardboard to each box.

Note: confirmations can be replaced with ordinary self-tapping screws, but their connection is not so reliable.

Step 3. Using corner clamps assembling the cabinet. Fasten with self-tapping screws guides for boxes.

Step 4. We assemble the table. Tumbu and lateral We fasten the wall on top with small chipboard. Cover the part with a larger sheet rear walls. We install guides on small drawers and facades.

Step 5. In the same way we collect second the table that will longer due to two cabinets.

Step 6. We install the tabletop on short table. To do this, screw it onto small sheets.

Step 7 We attach the tabletop to second table.

Step 8 Install facades on large boxes, attach to them pens. We nail hardboard.

So that the child has comfortable work at a new desk, you should take account following:

• • Width The table for a child should be from 60 to 80 cm, length from 120 cm.
  • Boys require more workspace than girls.
  • Workplace It is recommended to organize a schoolchild near the window.
  • Definitely worth installing on a desktop lamp with bright lighting. For right-handers, the light should fall from the left, for left-handers - from the right.
  • The chair should be comfortable, it back – rigid with bending. Good decision - orthopedic armchair.
  • Screen monitor should be located during operation below eye level at an angle of 15-30 degrees.

• Color spectrum The workplace should be selected based on the child’s wishes, but you should not make it too colorful and full of poisonous colors. A tacky table can distract child from doing homework. It is enough to choose bright accessories and furniture.
• Accessories are worth choosing creative shapes: and the children's table should have its own zest. Business minimalism – not the best option for a child.

How to make a table for a schoolchild with your own hands, see video: